HAL Module for Node.js (@linuxcnc-node/hal-2.8)

This module provides Node.js bindings for the LinuxCNC Hardware Abstraction Layer (HAL) for LinuxCNC version 2.8.

It is a simplified version of the original @linuxcnc-node/hal module that I've backported to create a simple VCP(Virtual Control Panel) interface for older version of LinuxCNC.

It focuses on providing a way to interact with HAL as a component, omitting the global functionalities (pin/param/signal info methods removed, rest of the functions are left in place, but they were never tested - due to changes in the library's API, tests for newer version fail, thus they are not included, but they might work properly).

The unready() method was removed from the component API, as it is not available in the HAL library for LinuxCNC 2.8.

Features

- Create HAL components.
- Define HAL pins and parameters for components.
- Set components to ready state.
- Get and set values of pins and parameters using a proxy-like interface.
- Global HAL functions:
- Check if components exist or are ready.
- Manage RTAPI message levels.
- Create new signals.
- Connect pins to signals and disconnect them.
- Get and set values of arbitrary pins, parameters, or signals.
- Retrieve information about all pins, signals, or parameters in the system.
- TypeScript support with type definitions and wrapper classes.
- Monitoring: Watch pin and parameter value changes with configurable polling intervals and callback functions.

Installation

To install the @linuxcnc-node/hal-2.8 module, use npm or yarn:

``bash
npm install @linuxcnc-node/hal-2.8


or


yarn add @linuxcnc-node/hal-2.8
`

$3

The module needs to compile against the LinuxCNC development headers and link against its libraries.

#### Standard LinuxCNC Installations

For standard LinuxCNC installations (e.g., from a Debian package or run-in-place after ./configure && make):

- The build script will attempt to locate the necessary files automatically.

#### Custom LinuxCNC Installations

For non-standard or custom LinuxCNC installations:

If LinuxCNC is installed in a custom location you will need to set the following environment variables before running npm install or yarn add:

- LINUXCNC_INCLUDE: Path to the directory containing LinuxCNC's include files (e.g., hal.h, rtapi.h).
Example: export LINUXCNC_INCLUDE=/path/to/linuxcnc-dev/include
- LINUXCNC_LIB: Path to the directory containing LinuxCNC's compiled libraries (e.g., liblinuxcnchal.so).
Example: export LINUXCNC_LIB=/path/to/linuxcnc-dev/lib

Usage Example

`javascript
const hal = require("@linuxcnc-node/hal-2.8");

// --- Component Creation ---
// Create a new HAL component named 'my-js-comp'
const comp = hal.component("my-js-comp");

console.log(Component Name: ${comp.name});
console.log(Component Prefix: ${comp.prefix});

// --- Adding Pins and Parameters ---
const outFloatPin = comp.newPin("output.float", hal.HAL_FLOAT, hal.HAL_OUT);
const inBitPin = comp.newPin("input.bit", hal.HAL_BIT, hal.HAL_IN);
const rwS32Param = comp.newParam("param.s32", hal.HAL_S32, hal.HAL_RW);

// --- Making Component Ready ---
comp.ready();
console.log(Is 'my-js-comp' ready? ${hal.componentIsReady("my-js-comp")});

// --- Accessing Pin/Param Values (Proxy Interface) ---
comp["output.float"] = 123.45;
comp["param.s32"] = -100;

console.log(Value of output.float: ${comp["output.float"]});
console.log(Value of input.bit (not connected): ${comp["input.bit"]});

// --- Using Pin/Param Objects ---
console.log(Pin object value: ${outFloatPin.getValue()}); // 123.45
rwS32Param.setValue(200);
console.log(Param object value: ${rwS32Param.getValue()}); // 200

// --- Information Functions ---
console.log("All Pins:", JSON.stringify(hal.getInfoPins(), null, 2));

// --- Message Levels ---
hal.setMsgLevel(hal.MSG_ALL);
console.log(Current message level: ${hal.getMsgLevel()});

// --- Monitoring System ---
// Set up monitoring with custom polling interval
comp.setMonitoringOptions({ pollInterval: 20 }); // Check every 20ms

// Watch for changes on pins and parameters
outFloatPin.watch((newValue, oldValue, pin) => {
console.log(Output pin changed: ${oldValue} -> ${newValue});
});

rwS32Param.watch((newValue, oldValue, param) => {
console.log(Parameter changed: ${oldValue} -> ${newValue});
});

// Multiple callbacks can watch the same object
const callback2 = (newValue, oldValue, object) => {
console.log(Secondary callback: ${object.name} = ${newValue});
};
outFloatPin.watch(callback2);

// Remove specific callbacks when no longer needed
outFloatPin.removeWatch(callback2);

// Check what's currently being monitored
console.log("Watched objects:", comp.getWatchedObjects());

// Clean up monitoring when done
comp.destroy(); // Stops all monitoring and cleans up resources
`

API Reference

The main entry point is the hal object imported from the module.

$3

#### hal.component(name: string, prefix?: string): HalComponentInstance

Creates and returns a new HAL component instance, wrapped in the HalComponent class.

- name: string: The name of the component (e.g., "my-component"). This will be registered with LinuxCNC HAL.
- prefix?: string (optional): The prefix for pins and parameters created by this component. If not provided, defaults to name.
- Returns: An instance of HalComponent (typed as HalComponentInstance which includes dynamic properties for pins/params).

$3

This class (provided by the TypeScript wrapper) represents a HAL component. Instances are created via hal.component().

Properties:

- readonly name: string: The name of the HAL component (e.g., "my-js-comp").
- readonly prefix: string: The prefix used for this component's pins and parameters (e.g., "my-js-comp" or a custom prefix).

Methods:

- newPin(nameSuffix: string, type: HalType, direction: HalPinDir): Pin

- Creates a new HAL pin associated with this component.
- nameSuffix: string: The suffix for the pin name (e.g., "in1", "motor.0.pos"). The full HAL name will be this.prefix + "." + nameSuffix.
- type: HalType: The data type of the pin (e.g., hal.HAL_FLOAT, hal.HAL_BIT). See Constants.
- direction: HalPinDir: The direction of the pin (e.g., hal.HAL_IN, hal.HAL_OUT, hal.HAL_IO). See Constants.
- Returns: A new Pin object instance.
- _Note:_ This method can only be called before component.ready().

- newParam(nameSuffix: string, type: HalType, direction: HalParamDir): Param

- Creates a new HAL parameter associated with this component.
- nameSuffix: string: The suffix for the parameter name. The full HAL name will be this.prefix + "." + nameSuffix.
- type: HalType: The data type of the parameter. See Constants.
- direction: HalParamDir: The writability of the parameter (hal.HAL_RO for read-only, hal.HAL_RW for read-write). See Constants.
- Returns: A new Param object instance.
- _Note:_ This method can only be called before component.ready().

- ready(): void

- Marks this component as ready and available to the HAL system. Once ready, pins can be linked, and parameters can be accessed by other HAL components or tools.
- Pins and parameters cannot be added after ready() is called.

- getPins(): { [key: string]: Pin }

- Retrieves a map of all Pin objects created for this component.
- Returns: An object where keys are the nameSuffix of the pins and values are the corresponding Pin instances.

- getParams(): { [key: string]: Param }
- Retrieves a map of all Param objects created for this component.
- Returns: An object where keys are the nameSuffix of the parameters and values are the corresponding Param instances.

Monitoring Methods:

- setMonitoringOptions(options: HalWatchOptions): void

- Configures the monitoring system settings.
- options: HalWatchOptions: Configuration object with pollInterval property (in milliseconds).
- The monitoring system will check for value changes at the specified interval (default: 10ms).

- getMonitoringOptions(): HalWatchOptions

- Retrieves the current monitoring configuration.
- Returns: A copy of the current monitoring options.

- addWatch(name: string, callback: HalWatchCallback): void

- Adds a watch callback for a pin or parameter at the component level.
- name: string: The nameSuffix of the pin or parameter to monitor.
- callback: HalWatchCallback: Function to call when the value changes.
- Automatically starts the monitoring timer if this is the first watched object.
- _Throws an error if no pin or parameter exists with the given name._

- removeWatch(name: string, callback: HalWatchCallback): void

- Removes a specific watch callback for a pin or parameter.
- name: string: The nameSuffix of the pin or parameter.
- callback: HalWatchCallback: The exact callback function to remove.
- Automatically stops the monitoring timer if this was the last watched object.

- getWatchedObjects(): HalWatchedObject[]

- Gets a list of all pins and parameters currently being monitored.
- Returns: Array of objects containing the monitored pin/parameter, last known value, and active callbacks.

- destroy(): void
- Cleans up the monitoring system, stops all timers, and clears all watch callbacks.
- Should be called when the component is no longer needed to prevent memory leaks.

Pin/Parameter Proxy Access:
HalComponent instances use a JavaScript Proxy to allow direct property-like access to their pins and parameters using their nameSuffix.

`javascript
// Assuming 'comp' is a HalComponent instance
// and 'output1' is a pin/param suffix for that component.

// Set value (for OUT/IO pins or RW params)
comp["output1"] = 10.5;

// Get value
const val = comp["output1"];
`

This internally calls the native getProperty and setProperty methods of the underlying C++ HalComponentWrapper. Errors will be thrown if the item doesn't exist, or if you try to set a read-only item or an IN pin.

$3

Represents a HAL pin. Instances are returned by component.newPin().

Properties:

- readonly name: string: The nameSuffix of the pin.
- readonly type: HalType: The HAL data type of the pin.
- readonly direction: HalPinDir: The direction of the pin.

Methods:

- getValue(): number | boolean
- Retrieves the current value of this pin.
- Returns: The pin's value.
- setValue(value: number | boolean): number | boolean
- Sets the value of this pin. Only applicable to HAL_OUT or HAL_IO pins.
- value: The new value for the pin.
- Returns: The value that was set.
- _Throws an error if trying to set an HAL_IN pin._

Monitoring Methods:

- watch(callback: HalWatchCallback): void

- Starts monitoring this pin for value changes.
- callback: HalWatchCallback: Function called when the pin value changes. Receives (newValue, oldValue, pinObject).
- Multiple callbacks can be registered for the same pin.

- removeWatch(callback: HalWatchCallback): void
- Stops monitoring this pin with the specified callback function.
- callback: HalWatchCallback: The exact callback function to remove.

$3

Represents a HAL parameter. Instances are returned by component.newParam().

Properties:

- readonly name: string: The nameSuffix of the parameter.
- readonly type: HalType: The HAL data type of the parameter.
- readonly direction: HalParamDir: The writability of the parameter (HAL_RO or HAL_RW).

Methods:

- getValue(): number | boolean
- Retrieves the current value of this parameter.
- Returns: The parameter's value.
- setValue(value: number | boolean): number | boolean
- Sets the value of this parameter.
- value: The new value for the parameter.
- Returns: The value that was set.

Monitoring Methods:

- watch(callback: HalWatchCallback): void

- Starts monitoring this parameter for value changes.
- callback: HalWatchCallback: Function called when the parameter value changes. Receives (newValue, oldValue, paramObject).
- Multiple callbacks can be registered for the same parameter.

- removeWatch(callback: HalWatchCallback): void
- Stops monitoring this parameter with the specified callback function.
- callback: HalWatchCallback: The exact callback function to remove.

$3

These functions operate on the global HAL state or on items identified by their full HAL name.

- componentExists(name: string): boolean

- Checks if a HAL component with the given name (e.g., "halui", "my-custom-comp") exists in the system.
- Returns: true if the component exists, false otherwise.

- componentIsReady(name: string): boolean

- Checks if the HAL component with the given name has been marked as ready.
- Returns: true if the component exists and is ready, false otherwise.

- getMsgLevel(): RtapiMsgLevel

- Gets the current RTAPI message verbosity level used by HAL.
- Returns: The current message level (e.g., hal.MSG_INFO). See Constants.

- setMsgLevel(level: RtapiMsgLevel): void

- Sets the RTAPI message verbosity level.
- level: RtapiMsgLevel: The new message level to set.

- connect(pinName: string, signalName: string): boolean

- Links a HAL pin to a HAL signal.
- pinName: string: The full name of the pin (e.g., "my-comp.out1").
- signalName: string: The name of the signal to connect to.
- Returns: true on success, false on failure (error is thrown by native layer).

- disconnect(pinName: string): boolean

- Unlinks a HAL pin from any signal it's currently connected to.
- pinName: string: The full name of the pin.
- Returns: true on success, false on failure (error is thrown).

- newSignal(signalName: string, type: HalType): boolean

- Creates a new HAL signal.
- signalName: string: The desired name for the new signal.
- type: HalType: The data type for the new signal.
- Returns: true on success, false on failure (error is thrown).

- pinHasWriter(pinName: string): boolean

- Checks if the signal connected to an IN pin has at least one writer (another pin driving it).
- pinName: string: The full name of the IN pin.
- Returns: true if the pin is connected to a signal and that signal has one or more writers, false otherwise.
- _Throws an error if the pin does not exist._

- getValue(name: string): number | boolean

- Gets the current value of any HAL item (pin, parameter, or signal) identified by its full name.
- Returns: The value of the item.
- _Throws an error if the item is not found._

- setPinParamValue(name: string, value: string | number | boolean): boolean

- Sets the value of a HAL pin or parameter identified by its full name.
- The value is converted from its JavaScript type to a string and then parsed by the C++ layer, similar to halcmd setp.
- This can set unconnected IN pins (modifying their internal dummysig) or RW parameters.
- Returns: true on success, false on failure (error is thrown).
- _Cannot set OUT pins or connected IN pins with this function (use direct signal manipulation or component proxy access for connected items where appropriate)._

- setSignalValue(name: string, value: string | number | boolean): boolean
- Sets the value of an unconnected HAL signal identified by its name.
- The value is converted and parsed similarly to setPinParamValue.
- Returns: true on success, false on failure (error is thrown).
- _Throws an error if the signal has writers._

$3

The module exports various HAL and RTAPI constants, mirroring the enums defined in TypeScript (HalType, HalPinDir, HalParamDir, RtapiMsgLevel).

- HAL Data Types (hal.HAL_*)

- hal.HAL_BIT: Boolean type.
- hal.HAL_FLOAT: Double-precision floating point.
- hal.HAL_S32: Signed 32-bit integer.
- hal.HAL_U32: Unsigned 32-bit integer.

- HAL Pin Directions (hal.HAL_*)

- hal.HAL_IN: Input pin.
- hal.HAL_OUT: Output pin.
- hal.HAL_IO: Bidirectional pin.

- HAL Parameter Directions (hal.HAL_*)

- hal.HAL_RO: Read-only parameter.
- hal.HAL_RW: Read-write parameter.

- RTAPI Message Levels (hal.MSG_*)
- hal.MSG_NONE: No messages.
- hal.MSG_ERR: Error messages only.
- hal.MSG_WARN: Warning and error messages.
- hal.MSG_INFO: Informational, warning, and error messages.
- hal.MSG_DBG: Debug, informational, warning, and error messages.
- hal.MSG_ALL: All messages.

$3

Monitoring Types:

- type HalWatchCallback

`typescript
type HalWatchCallback = (
newValue: number | boolean,
oldValue: number | boolean,
object: Pin | Param
) => void;
`

- Callback function type for monitoring pin and parameter value changes.
- newValue: The new value of the monitored object.
- oldValue: The previous value of the monitored object.
- object: Reference to the Pin or Param object that changed.

- interface HalWatchOptions

`typescript
{
pollInterval?: number; // Polling interval in milliseconds (default: 10)
}
`

- Configuration options for the monitoring system.

- interface HalWatchedObject
`typescript
{
object: Pin | Param; // The monitored pin or parameter object
lastValue: number | boolean; // Last known value for change detection
callbacks: Set; // Active callback functions
}
`
- Internal representation of a monitored object (returned by getWatchedObjects()`).