MCC Melody Clock Driver

Overview

The Clock Driver helps the user to easily configure the System Clock , Auxiliary Clock , Reference Clock and CAN FD Clock using MCC Melody User Interface.

Features

$3

- User configurable System clock source.
- User configurable input frequency depending on the configured clock source.
- Auto configuration of System clocks(FOSC, FOSC/2) just by providing the required system frequency(FOSC) in Hertz.

$3

- User configurable Auxiliary clock source.
- Auto configuration of Auxiliary clock just by providing the required auxiliary clock output frequency in Hertz.

$3

- User configurable Reference clock source.
- Auto configuration of Reference clock just by providing the required REFO frequency in Hertz.

$3

- User configurable CAN FD clock source.
- Selected clock source is applicable for all CAN FD instances
- Requested FCAN frequency can be configured from CAN 2.0/CAN-FD modules in Drivers category.

PIC24/dsPIC33 Clock Driver and PLIB Version Compatibility Matrix

| Clock | Clock PLIB |
| :------ | :----------- |
| 1.1.0 | >=1.3.0 |
| 1.0.0 | >=1.2.0 |

Changelog

All notable changes to this project will be documented in this file.

[1.2.1] - 2023-09-25

$3

- CC16SCRIP-7641 :- Added notification & inline in secondary device/secondary core when primary/external [with/without PLL] clock source is selected
- CC16SCRIP-7274 :- Clock Source is configurable for dsPIC33CH1024MP712S1 device family

[1.2.0] - 2023-07-31

$3

- CC16SCRIP-6862 :- Support for Dual Core

[1.1.1] - 2023-01-05

$3

- CC16SCRIP-5444 :- Helper document icon redirects user to a broken link - Clock Module
- CC16SCRIP-5296 :- Reference clock output is enabled on the pin at initialization
- CC16SCRIP-5295 :- Reference clock SFRs are not configured to their POR default values at initialization
- CC16SCRIP-5294 :- Primary Oscillator with PLL oscillator configuration not supported at initialization
- CC16SCRIP-5293 :- APLLDIV1 is not being set to its POR value of 0x0041
- CC16SCRIP-4749 :- System frequency not getting calculated for FRC with Postscalar

[1.1.0] - 2022-06-30

$3

- CC16SCRIP-4021 :- Allow the user to set maximum system frequency through user interface

[1.0.3] - 2022-05-24

$3

- CC16SCRIP-2045 :- Dependency module names updated in builder view

[1.0.2] - 2022-03-10

$3

- CC16SCRIP-3176 :- Minimum and Maximum clock range added for input clock frequency and requested clock frequency