BokkyPooBah's DateTime Library

A gas-efficient Solidity date and time library.

Instead of using loops and lookup tables, this date conversions library uses formulae to convert year/month/day hour:minute:second to a Unix timestamp and back.

See BokkyPooBah’s Gas-Efficient Solidity DateTime Library for more explanations.

Thank you to Alex Kampa, James Zaki and Adrian Guerrera for helping to validate this library. Thanks also to Oleksii Matiiasevych for asking about leap seconds.

Table Of Contents

* History
* Bug Bounty Scope And Donations
* Deployment
* Questions And Answers
* Conventions
* Functions
* _daysFromDate
* _daysToDate
* timestampFromDate
* timestampFromDateTime
* timestampToDate
* timestampToDateTime
* isValidDate
* isValidDateTime
* isLeapYear
* _isLeapYear
* isWeekDay
* isWeekEnd
* getDaysInMonth
* _getDaysInMonth
* getDayOfWeek
* getYear
* getMonth
* getDay
* getHour
* getMinute
* getSecond
* addYears
* addMonths
* addDays
* addHours
* addMinutes
* addSeconds
* subYears
* subMonths
* subDays
* subHours
* subMinutes
* subSeconds
* diffYears
* diffMonths
* diffDays
* diffHours
* diffMinutes
* diffSeconds
* Gas Cost
* Algorithm
* Testing
* References

History

Version | Date | Notes
:------------------ |:------------ |:---------------------------------------
v1.00-pre-release | May 25 2018 | "Rarefaction" pre-release. I'm currently trying to get this library audited, so don't use in production mode yet.
v1.00-pre-release-a | Jun 2 2018 | "Rarefaction" pre-release a. Added the contracts/BokkyPooBahsDateTimeContract.sol wrapper for convenience.
Alex Kampa conducted a range of tests on the library.
v1.00-pre-release-b | Jun 4 2018 | "Rarefaction" pre-release b. Replaced public function with internal for easier EtherScan verification - a83e13b.
Deployed contracts/BokkyPooBahsDateTimeContract.sol with the inlined contracts/BokkyPooBahsDateTimeLibrary.sol to the Ropsten network at address 0x07239bb079094481bfaac91ca842426860021aaa
v1.00-pre-release-c | June 8 2018 | "Rarefaction" pre-release c. Added require(year >= 1970) to _daysFromDate(...) in 4002b27 as highlighted in James Zaki's audit
v1.00-pre-release-d | Sep 1 2018 | "Rarefaction" pre-release d. Added isValidDate(...) and isValidDateTime(...) in 380061b as highlighted in Adrian Guerrera's audit
v1.00 | Sep 2 2018 | "Rarefaction" release
v1.01 | Feb 14 2019 | "Notoryctes" release. Upgraded contracts to Solidity 0.5.x.
Updated to MIT Licence
v1.01 | Feb 17 2019 | Bug bounty added

Bug Bounty Scope And Donations

Details of the bug bounty program for this project can be found at BokkyPooBah's Hall Of Fame And Bug Bounties. Please consider donating to support the bug bounty, and the development and maintenance of decentralised applications.

The scope of the bug bounty for this project follows:

* contracts/BokkyPooBahsDateTimeLibrary.sol

Deployment

v1.00 of the source code for BokkyPooBahsDateTimeContract.sol and TestDateTime.sol has been deployed to:

* The Ropsten network:
* BokkyPooBahsDateTimeContract.sol at 0x947cc35992e6723de50bf704828a01fd2d5d6641
* TestDateTime.sol at 0xa068fe3e029a972ecdda2686318806d2b19875d1

* Mainnet:
* BokkyPooBahsDateTimeContract.sol at 0x23d23d8f243e57d0b924bff3a3191078af325101
* TestDateTime.sol at 0x78f96b2d5f717fa9ad416957b79d825cc4cce69d

For each of the deployed contracts above, you can click on the Read Contract tab to test out the date/time/timestamp functions.

Questions And Answers

$3

User /u/_dredge asked the following questions:

> Some Muslim countries have a Friday/Saturday weekend. Workday(1-7) may be more useful.
>
> I presume leap seconds and such details are taken care of in the Unix timecode.
>
> Some additional ideas for functions below.
>
> Quarter calculations
>
> weekNumber(1-53)
>
> Complete years / months / weeks / days
>
> Nearest years / months / weeks / days

Regarding regions and systems where Friday/Saturday are weekends, please use the function getDayOfWeek(timestamp) that returns 1 (= Monday, ..., 7 (= Sunday) to determine whether you should treat a day as a weekday or weekend.

See the next question regarding the leap seconds.

Regarding the additional ideas, thanks!

$3

Asked by Oleksii Matiiasevych and /u/_dredge above.

For example, a leap second was inserted on Jan 01 1999.

From the first answer to Unix time and leap seconds:

> The number of seconds per day are fixed with Unix timestamps.
>
> > The Unix time number is zero at the Unix epoch, and increases by exactly 86400 per day since the epoch.
>
> So it cannot represent leap seconds. The OS will slow down the clock to accommodate for this. The leap seconds is simply not existent as far a Unix timestamps are concerned.

And from the second answer to Unix time and leap seconds:

> Unix time is easy to work with, but some timestamps are not real times, and some timestamps are not unique times.
>
> That is, there are some duplicate timestamps representing two different seconds in time, because in unix time the sixtieth second might have to repeat itself (as there can't be a sixty-first second). Theoretically, they could also be gaps in the future because the sixtieth second doesn't have to exist, although no skipping leap seconds have been issued so far.
>
> Rationale for unix time: it's defined so that it's easy to work with. Adding support for leap seconds to the standard libraries is very tricky.
> ...

This library aims to replicate the Unix time functionality and assumes that leap seconds are handled by the underlying operating system.

$3

Asked by Adrian Guerrera.

2345 is just an arbitrary number chosen for the year limit to test to. The algorithms should still work beyond this date.

$3

Asked by Adrian Guerrera. Specifically, the functions _daysFromDate, timestampFromDate and timestampFromDateTime.

The date and time inputs should be validated before the values are passed to these functions. The validation functions isValidDate(...) and isValidDateTime(...) have now been added for this purpose.

$3

This library provides a cheap conversion between the timestamp and year/month/day hour:minute:second formats. There is no requirement for this library to store a packed structure to represent a DateTime as this data can be stored as a uint256 and converted on the fly to year/month/day hour:minute:second.

$3

The formulae for converting between a timestamp and year/month/day hour:minute:second format uses a mathematically simple algorithm without any loops. The gas cost is relatively constant (as there are no loops) and the mathematical computations are relative cheap (compared to using loops and looking up data from storage).

$3

Most likely. The aim of this first version is for the conversions to be computed correctly.

$3

From Gas Cost, timestampToDateTime(…) has an execution gas cost of 3,101 gas, and timestampFromDateTime(…) has an execution gas cost of 2,566 gas.

Conventions

All dates, times and Unix timestamps are UTC.

Unit | Range | Notes
:------------- |:-------------------------:|:---------------------------------------------------------------
timestamp | >= 0 | Unix timestamp, number of seconds since 1970/01/01 00:00:00 UTC
year | 1970 ... 2345 |
month | 1 ... 12 |
day | 1 ... 31 |
hour | 0 ... 23 |
minute | 0 ... 59 |
second | 0 ... 59 |
dayOfWeek | 1 ... 7 | 1 = Monday, ..., 7 = Sunday
year/month/day | 1970/01/01 ... 2345/12/31 |

_days, _months and _years variable names are _-prefixed as the non-prefixed versions are reserved words in Solidity.

All functions operate on the uint timestamp data type, except for functions prefixed with _.

Functions

$3

Calculate the number of days _days from 1970/01/01 to year/month/day.

``javascript
function _daysFromDate(uint year, uint month, uint day) public pure returns (uint _days)
`

NOTE This function does not validate the year/month/day input. Use isValidDate(...) to validate the input if necessary.

$3

Calculate year/month/day from the number of days _days since 1970/01/01 .

`javascript
function _daysToDate(uint _days) public pure returns (uint year, uint month, uint day)
`

$3

Calculate the timestamp to year/month/day.

`javascript
function timestampFromDate(uint year, uint month, uint day) public pure returns (uint timestamp)
`

NOTE This function does not validate the year/month/day input. Use isValidDate(...) to validate the input if necessary.

$3

Calculate the timestamp to year/month/day hour:minute:second UTC.

`javascript
function timestampFromDateTime(uint year, uint month, uint day, uint hour, uint minute, uint second) public pure returns (uint timestamp)
`

NOTE This function does not validate the year/month/day hour:minute:second input. Use isValidDateTime(...) to validate the input if necessary.

$3

Calculate year/month/day from timestamp.

`javascript
function timestampToDate(uint timestamp) public pure returns (uint year, uint month, uint day)
`

$3

Calculate year/month/day hour:minute:second from timestamp.

`javascript
function timestampToDateTime(uint timestamp) public pure returns (uint year, uint month, uint day, uint hour, uint minute, uint second)
`

$3

Is the date specified by year/month/day a valid date?

`javascript_
function isValidDate(uint year, uint month, uint day) internal pure returns (bool valid)
`

$3

Is the date/time specified by year/month/day hour:minute:second a valid date/time?

`javascript_
function isValidDateTime(uint year, uint month, uint day, uint hour, uint minute, uint second) internal pure returns (bool valid)
`

$3

Is the year specified by timestamp a leap year?

`javascript_
function isLeapYear(uint timestamp) public pure returns (bool leapYear)
`

$3

Is the specified year (e.g. 2018) a leap year?

`javascript_
function _isLeapYear(uint year) public pure returns (bool leapYear)
`

$3

Is the day specified by timestamp a weekday (Monday, ..., Friday)?

`javascript
function isWeekDay(uint timestamp) public pure returns (bool weekDay)
`

$3

Is the day specified by timestamp a weekend (Saturday, Sunday)?

`javascript
function isWeekEnd(uint timestamp) public pure returns (bool weekEnd)
`

$3

Return the day in the month daysInMonth for the month specified by timestamp.

`javascript
function getDaysInMonth(uint timestamp) public pure returns (uint daysInMonth)
`

$3

Return the day in the month daysInMonth (1, ..., 31) for the month specified by the year/month.

`javascript
function _getDaysInMonth(uint year, uint month) public pure returns (uint daysInMonth)
`

$3

Return the day of the week dayOfWeek (1 = Monday, ..., 7 = Sunday) for the date specified by timestamp.

`javascript
function getDayOfWeek(uint timestamp) public pure returns (uint dayOfWeek)
`

$3

Get the year of the date specified by timestamp.

`javascript
function getYear(uint timestamp) public pure returns (uint year)
`

$3

Get the month of the date specified by timestamp.

`javascript
function getMonth(uint timestamp) public pure returns (uint month)
`

$3

Get the day of the month day (1, ..., 31) of the date specified timestamp.

`javascript
function getDay(uint timestamp) public pure returns (uint day)
`

$3

Get the hour of the date and time specified by timestamp.

`javascript
function getHour(uint timestamp) public pure returns (uint hour)
`

$3

Get the minute of the date and time specified by timestamp.

`javascript
function getMinute(uint timestamp) public pure returns (uint minute)
`

$3

Get the second of the date and time specified by timestamp.

`javascript
function getSecond(uint timestamp) public pure returns (uint second)
`

$3

Add _years years to the date and time specified by timestamp.

Note that the resulting day of the month will be adjusted if it exceeds the valid number of days in the month. For example, if the original date is 2020/02/29 and an additional year is added to this date, the resulting date will be an invalid date of 2021/02/29. The resulting date is then adjusted to 2021/02/28.

`javascript
function addYears(uint timestamp, uint _years) public pure returns (uint newTimestamp)
`

$3

Add _months months to the date and time specified by timestamp.

Note that the resulting day of the month will be adjusted if it exceeds the valid number of days in the month. For example, if the original date is 2019/01/31 and an additional month is added to this date, the resulting date will be an invalid date of 2019/02/31. The resulting date is then adjusted to 2019/02/28.

`javascript
function addMonths(uint timestamp, uint _months) public pure returns (uint newTimestamp)
`

$3

Add _days days to the date and time specified by timestamp.

`javascript
function addDays(uint timestamp, uint _days) public pure returns (uint newTimestamp)
`

$3

Add _hours hours to the date and time specified by timestamp.

`javascript
function addHours(uint timestamp, uint _hours) public pure returns (uint newTimestamp)
`

$3

Add _minutes minutes to the date and time specified by timestamp.

`javascript
function addMinutes(uint timestamp, uint _minutes) public pure returns (uint newTimestamp)
`

$3

Add _seconds seconds to the date and time specified by timestamp.

`javascript
function addSeconds(uint timestamp, uint _seconds) public pure returns (uint newTimestamp)
`

$3

Subtract _years years from the date and time specified by timestamp.

Note that the resulting day of the month will be adjusted if it exceeds the valid number of days in the month. For example, if the original date is 2020/02/29 and a year is subtracted from this date, the resulting date will be an invalid date of 2019/02/29. The resulting date is then adjusted to 2019/02/28.

`javascript
function subYears(uint timestamp, uint _years) public pure returns (uint newTimestamp)
`

$3

Subtract _months months from the date and time specified by timestamp.

Note that the resulting day of the month will be adjusted if it exceeds the valid number of days in the month. For example, if the original date is 2019/03/31 and a month is subtracted from this date, the resulting date will be an invalid date of 2019/02/31. The resulting date is then adjusted to 2019/02/28.

`javascript
function subMonths(uint timestamp, uint _months) public pure returns (uint newTimestamp)
`

$3

Subtract _days days from the date and time specified by timestamp.

`javascript
function subDays(uint timestamp, uint _days) public pure returns (uint newTimestamp)
`

$3

Subtract _hours hours from the date and time specified by timestamp.

`javascript
function subHours(uint timestamp, uint _hours) public pure returns (uint newTimestamp)
`

$3

Subtract _minutes minutes from the date and time specified by timestamp.

`javascript
function subMinutes(uint timestamp, uint _minutes) public pure returns (uint newTimestamp)
`

$3

Subtract _seconds seconds from the date and time specified by timestamp.

`javascript
function subSeconds(uint timestamp, uint _seconds) public pure returns (uint newTimestamp)
`

$3

Calculate the number of years between the dates specified by fromTimeStamp and toTimestamp.

Note that this calculation is computed as getYear(toTimestamp) - getYear(fromTimestamp), rather that subtracting the years (since 1970/01/01) represented by both {to|from}Timestamp.

`javascript
function diffYears(uint fromTimestamp, uint toTimestamp) public pure returns (uint _years)
`

$3

Calculate the number of months between the dates specified by fromTimeStamp and toTimestamp.

Note that this calculation is computed as getYear(toTimestamp) 12 + getMonth(toTimestamp) - getYear(fromTimestamp) 12 - getMonth(fromTimestamp), rather that subtracting the months (since 1970/01/01) represented by both {to|from}Timestamp.

`javascript
function diffMonths(uint fromTimestamp, uint toTimestamp) public pure returns (uint _months)
`

$3

Calculate the number of days between the dates specified by fromTimeStamp and toTimestamp.

Note that this calculation is computed as (toTimestamp - fromTimestamp) / SECONDS_PER_DAY, rather that subtracting the days (since 1970/01/01) represented by both {to|from}Timestamp.

`javascript
function diffDays(uint fromTimestamp, uint toTimestamp) public pure returns (uint _days)
`

$3

Calculate the number of hours between the dates specified by fromTimeStamp and toTimestamp.

Note that this calculation is computed as (toTimestamp - fromTimestamp) / SECONDS_PER_HOUR, rather that subtracting the hours (since 1970/01/01) represented by both {to|from}Timestamp.

`javascript
function diffHours(uint fromTimestamp, uint toTimestamp) public pure returns (uint _hours)
`

$3

Calculate the number of minutes between the dates specified by fromTimeStamp and toTimestamp.

Note that this calculation is computed as (toTimestamp - fromTimestamp) / SECONDS_PER_MINUTE, rather that subtracting the minutes (since 1970/01/01) represented by both {to|from}Timestamp.

`javascript
function diffMinutes(uint fromTimestamp, uint toTimestamp) public pure returns (uint _minutes)
`

$3

Calculate the number of seconds between the dates specified by fromTimeStamp and toTimestamp.

Note that this calculation is computed as toTimestamp - fromTimestamp.

`javascript
function diffSeconds(uint fromTimestamp, uint toTimestamp) public pure returns (uint _seconds)
`

Gas Cost

$3

From executing the following function, the transaction gas cost is 24,693

`javascript
> testDateTime.timestampToDateTime(1527120000)
[2018, 5, 24, 0, 0, 0]
> testDateTime.timestampToDateTime.estimateGas(1527120000)
24693
`

From Remix, the execution gas cost is 3,101 .

From my latest testing with Remix using Solidity 0.4.24:

$3

From executing the following function, the transaction gas cost is 25,054

`javascript
> testDateTime.timestampFromDateTime(2018, 05, 24, 1, 2, 3)
1527123723
> testDateTime.timestampFromDateTime.estimateGas(2018, 05, 24, 1, 2, 3)
25054
`

From Remix, the execution gas cost is 2,566 .

From my latest testing with Remix using Solidity 0.4.24:

$3

Remix gas estimates using Solidity 0.4.24:

`json
{
"Creation": {
"codeDepositCost": "908400",
"executionCost": "942",
"totalCost": "909342"
},
"External": {
"DOW_FRI()": "1130",
"DOW_MON()": "1262",
"DOW_SAT()": "1064",
"DOW_SUN()": "360",
"DOW_THU()": "1108",
"DOW_TUE()": "250",
"DOW_WED()": "778",
"OFFSET19700101()": "932",
"SECONDS_PER_DAY()": "690",
"SECONDS_PER_HOUR()": "580",
"SECONDS_PER_MINUTE()": "1196",
"_daysFromDate(uint256,uint256,uint256)": "638",
"_daysToDate(uint256)": "1280",
"_getDaysInMonth(uint256,uint256)": "885",
"_isLeapYear(uint256)": "1115",
"_now()": "997",
"_nowDateTime()": "1562",
"addDays(uint256,uint256)": "772",
"addHours(uint256,uint256)": "662",
"addMinutes(uint256,uint256)": "838",
"addMonths(uint256,uint256)": "1851",
"addSeconds(uint256,uint256)": "896",
"addYears(uint256,uint256)": "1846",
"diffDays(uint256,uint256)": "1207",
"diffHours(uint256,uint256)": "503",
"diffMinutes(uint256,uint256)": "316",
"diffMonths(uint256,uint256)": "infinite",
"diffSeconds(uint256,uint256)": "712",
"diffYears(uint256,uint256)": "infinite",
"getDay(uint256)": "1114",
"getDayOfWeek(uint256)": "415",
"getDaysInMonth(uint256)": "1120",
"getHour(uint256)": "491",
"getMinute(uint256)": "1373",
"getMonth(uint256)": "1378",
"getSecond(uint256)": "810",
"getYear(uint256)": "1337",
"isLeapYear(uint256)": "1633",
"isValidDate(uint256,uint256,uint256)": "942",
"isValidDateTime(uint256,uint256,uint256,uint256,uint256,uint256)": "1269",
"isWeekDay(uint256)": "1284",
"isWeekEnd(uint256)": "624",
"subDays(uint256,uint256)": "1146",
"subHours(uint256,uint256)": "288",
"subMinutes(uint256,uint256)": "992",
"subMonths(uint256,uint256)": "2363",
"subSeconds(uint256,uint256)": "1336",
"subYears(uint256,uint256)": "1871",
"timestampFromDate(uint256,uint256,uint256)": "718",
"timestampFromDateTime(uint256,uint256,uint256,uint256,uint256,uint256)": "1077",
"timestampToDate(uint256)": "infinite",
"timestampToDateTime(uint256)": "1945"
}
}
`



Algorithm

The formulae to convert year/month/day hour:minute:second to a Unix timestamp and back use the algorithms from Converting Between Julian Dates and Gregorian Calendar Dates. These algorithms were originally designed by Fliegel and van Flandern (1968).

Note that these algorithms depend on negative numbers, so Solidity unsigned integers uint are converted to signed integers int to compute the date conversions and the results are converted back to uint for general use.

$3

The Fortran algorithm follows:

`
INTEGER FUNCTION JD (YEAR,MONTH,DAY)
C
C---COMPUTES THE JULIAN DATE (JD) GIVEN A GREGORIAN CALENDAR
C DATE (YEAR,MONTH,DAY).
C
INTEGER YEAR,MONTH,DAY,I,J,K
C
I= YEAR
J= MONTH
K= DAY
C
JD= K-32075+1461(I+4800+(J-14)/12)/4+367(J-2-(J-14)/12*12)
2 /12-3*((I+4900+(J-14)/12)/100)/4
C
RETURN
END
`

Translating this formula, and subtracting an offset (2,440,588) so 1970/01/01 is day 0:

`
days = day
- 32075
+ 1461 * (year + 4800 + (month - 14) / 12) / 4
+ 367 (month - 2 - (month - 14) / 12 12) / 12
- 3 * ((year + 4900 + (month - 14) / 12) / 100) / 4
- offset
`

$3

The Fortran algorithm follows:

`
SUBROUTINE GDATE (JD, YEAR,MONTH,DAY)
C
C---COMPUTES THE GREGORIAN CALENDAR DATE (YEAR,MONTH,DAY)
C GIVEN THE JULIAN DATE (JD).
C
INTEGER JD,YEAR,MONTH,DAY,I,J,K
C
L= JD+68569
N= 4*L/146097
L= L-(146097*N+3)/4
I= 4000*(L+1)/1461001
L= L-1461*I/4+31
J= 80*L/2447
K= L-2447*J/80
L= J/11
J= J+2-12*L
I= 100*(N-49)+I+L
C
YEAR= I
MONTH= J
DAY= K
C
RETURN
END
`

Translating this formula and adding an offset (2,440,588) so 1970/01/01 is day 0:

`
int L = days + 68569 + offset
int N = 4 * L / 146097
L = L - (146097 * N + 3) / 4
year = 4000 * (L + 1) / 1461001
L = L - 1461 * year / 4 + 31
month = 80 * L / 2447
dd = L - 2447 * month / 80
L = month / 11
month = month + 2 - 12 * L
year = 100 * (N - 49) + year + L
`

Testing

Details of the testing environment can be found in test.

The DateTime library calculations have been tested for the date range 1970/01/01 to 2345/12/01 for periodically sampled dates.

The following functions were tested using the script test/01_test1.sh with the summary results saved
in test/test1results.txt and the detailed output saved in test/test1output.txt:

* [x] Deploy contracts/BokkyPooBahsDateTimeLibrary.sol library
* [x] Deploy contracts/TestDateTime.sol contract
* [x] Test isValidDate(...)
* [x] Test isValidDateTime(...)
* [x] Test isLeapYear(...)
* [x] Test _isLeapYear(...)
* [x] Test isWeekDay(...)
* [x] Test isWeekEnd(...)
* [x] Test getDaysInMonth(...)
* [x] Test _getDaysInMonth(...)
* [x] Test getDayOfWeek(...)
* [x] Test get{Year|Month|Day|Hour|Minute|Second}(...)
* [x] Test add{Years|Months|Days|Hours|Minutes|Seconds}(...)
* [x] Test sub{Years|Months|Days|Hours|Minutes|Seconds}(...)
* [x] Test diff{Years|Months|Days|Hours|Minutes|Seconds}(...)
* [x] For a range of Unix timestamps from 1970/01/01 to 2345/12/21
* [x] Generate the year/month/day hour/minute/second from the Unix timestamp using timestampToDateTime(...)
* [x] Generate the Unix timestamp from the calculated year/month/day hour/minute/second using timestampFromDateTime(...)`
[x] Compare the year/month/day hour/minute/second to the JavaScript Date* calculation

References

A copy of the webpage with the algorithm Converting Between Julian Dates and Gregorian Calendar Dates has been saved to docs/ConvertingBetweenJulianDatesAndGregorianCalendarDates.pdf as some people have had difficulty accessing this page.

Enjoy!

(c) BokkyPooBah / Bok Consulting Pty Ltd - Feb 17 2019. The MIT Licence.