ReScript's new standard library. Intended to be familiar for JavaScript developers, easy to use, and be rich enough (without being bloated) so that you don't need to reach for anything else for typical ReScript development.
ReScript's new standard library. Intended to be familiar for JavaScript developers, easy to use, and be rich enough (without being bloated) so that you don't need to reach for anything else for typical ReScript development.
In ReScript 11, it is shipped as a separate npm package @rescript/core that is added to your project as per the installation instructions. In future ReScript versions, it will be included with the rescript npm package itself.
| @rescript/core | ReScript |
| --------------------------------------------------------------------- | --------------------- |
| 1.3.0 | 11.1+, uncurried mode |
| 1.0.0-1.2.0 | 11.0+ |
| 0.x | 10.1+ |
Goals:
1. Adding a rich (enough) standard library that's familiar to JavaScript developers
2. Clearing up the current confusing situation with regards to t-first vs t-last, OCaml pervasives, Js.Array2 etc
3. Prepare for "uncurried by default" by only shipping compatible APIs
In practice, the proposed standard library is a fusion of rescript-js, rescript-promise, and Belt - all battle tested and well liked, with a few minor additions sprinkled in. So while we're calling this a new standard library, the parts it's made up of isn't new.
It ships as a separate package, so you can try it out and start migrating to it if you want at your convenience. Eventually, if the community likes it and it stands the test of time, it might make its way into the compiler. And, at that point it would replace the current Js namespace.
You're encouraged to start using this today. We don't anticipate nor plan for larger changes to any of the APIs, but please be aware that _changes may still happen_ as this project stabilizes. We're of course also interested in the community's feedback on the APIs. The DX of using Core is going to gradually improve as we add doc strings, documentation and so on.
We've been following a few guiding principles as we developed this:
- Familiarity for JavaScript developers. Let APIs follow their JS equivalents as much as possible, and where there are new APIs that don't exist in the JS standard library, follow a naming and layout that we think will feel familiar to a JS developer. Example: Belt.Array.keepMap is included in the Array module, but here renamed to Array.filterMap to be more familiar to JS developers.
- Focus on zero cost APIs, but prioritize quality. Sometimes a small bit of runtime is required for the API to be as good as it can be.
- Effortless inference is important here. Choose APIs where inference just works. Example: Belt.Array.reduce is included instead of Js.Array2.reduce, because the Belt version's inference is better than the Js.Array2 version.
- @bloodyowl + contributors to rescript-js are the people who've done the heavy lifting here, since this stdlib is based heavily on rescript-js.
- Also a shout out to the authors of Belt, as a few key things have been incorporated directly from Belt.
- Patrick (@ryyppy) for his work on rescript-promise, which is fully inlined into the stdlib.
ReScript >=10.1 is required.
``console`
$ npm install @rescript/core
Then add @rescript/core to your bsconfig.json's bs-dependencies:
`diff`
{
"bs-dependencies": [
+ "@rescript/core"
]
}
Open it so it's available in the global scope.
`diff`
{
"bsc-flags": [
+ "-open RescriptCore",
]
}
to .res.js, .js, .res.cjs, or .cjs. This will work with older versions of Node and most web projects using a bundler.To use this library with EcmaScript modules you should set the file extension in your project's
rescript.json to .res.mjs, or .mjs.
This will work with newer versions of Node and web projects using a modern bundler like Vite.What it looks like
All relevant standard library modules are designed to be available directly in
the global scope, just like you expect them to.
`rescript
Console.log("Hello world!")let timeout = setTimeout(() => {
Console.log("Hello!")
}, 100)
clearTimeout(timeout)
let array = [1, 2, 3]
let sum = array
->Array.map(x => x * 2)
->Array.reduce(0, (acc, item) => acc + item)
let maybeValidFloats = ["1", "1.5", "some random string"]
let validFloats = maybeValidFloats
->Array.filterMap(v => v->Float.fromString)
`Documentation
Documentation will be added successively to this repository. We're looking for help in producing good, high quality docstrings for all APIs. More information coming on how you can help out with this.
OCaml compat
During the transition phase to this standard library you might find yourself needing to access the current global
/List etc modules that originate from OCaml. These will be removed eventually, but in the transition phase you'll be able to access them by adding this open at the top of any file:`rescript
open OCamlCompat
`Differences to
This standard library is based on
, but with the tweaks and modifications. Some of the changes are listed below. There are also no uncurried versions of anything in the standard library. This is because _uncurried by default_ will be coming soon in ReScript 11, which will remove the need for explicitly uncurried functions.$3
-
reduce/reduceReverse and friends (withIndex versions) are taken from Belt and replace the bindings to the JavaScript equivalents (reduce and reduceRight). The reduce versions from Belt works fully with type inference because of the argument order being reversed (init value comes first), whereas the JavaScript versions don't work well with inference. The runtime added for this is minor (and very fast still), and we want users to have to annotate as little as possible for the standard functions they'll be using.
- push/pushMany/unshift/unshiftMany are changed to return unit, for convenience. In JS, these return the new length of the array. That's however extremely rare to actually use, and you can just do Array.length(array) after pushing to get the new length. Changing the return type to be unit gets rid of needing to do let _ = (or ->ignore), which can be confusing for beginners.
- findIndexOpt/lastIndexOf/indexOfOpt are added, returning None instead of -1 if the item searched for does not exist. These are in addition to findIndex/lastIndexOf, which still returns -1 when the item you're looking for does not exist.
- getUnsafe added (copied from Belt).
- setUnsafe added (copied from Belt).
- sort, toSorted, reverse, toReversed, splice, toSpliced are the same as their JS counterpart (mutable and immutable, respectively).
- keepMap is added from Belt, but renamed to filterMap. Rationale: filterMap is closer to the JS convention of naming. It's also available in other languages like Rust. keep et al can confuse beginners, who're bound to be looking for filter style names since that's what JS has.
- shuffle and toShuffled are added (copied from Belt's shuffleInPlace and shuffle).
- flatMap added (copied from Belt, but using native map and concat functions).$3
-
fromString is copied from Belt. Main difference is that fromString now returns an option that's None if the parsed float is NaN. If you want the raw JS behavior of potentially parsing a float to NaN you can use Float.parseFloat(string).$3
-
searchOpt/indexOfOpt/lastIndexOfOpt added. Convenience methods for returning an option instead of returning -1 for not found.
- Added bindings for localeCompare.$3
The
Promise module is inlined from https://github.com/ryyppy/rescript-promise, with these additions:- Jaap's
ignorePromise PR is merged.$3
- The above stated modules are brought in from
Belt, since they're widely used in the ecosystem.
- In Option and List, the same naming convention is applied as in Array for keep* functions. As in keep becomes filter, keepMap becomes filterMap, etc.$3
-
window and document are typed as Dom.window/Dom.document rather than open objects ({..}).Migration
_Things are added to this section on migration gradually._
Migrating to the new standard library should be easy to do gradually. In this section we'll gather information that's intended to help migrating as painlessly as possible.
In general, we suggest you take the following gradual approach:
1. Install the stdlib and open it in the global scope
2. Fix any inconsistencies that uncovers. That will be things like module name clashes (more details below),
someArr[0] now returning an option, and so on.
3. Run the semi-automated migration below. This will uncover more things to fix.
4. Do a final search for Js. in your project, and replace any leftovers that the migration script did not catch.Check out this issue on the GitHub tracker if you get stuck. We'll do what we can to help out when migrating there.
$3
We've prepared a script you can run with comby.dev that will do parts of the migration for you automatically. The migration script is located in
migration.toml. Here's an example of how you can run it:`bash
Run in your project root. Assumes
migration.toml has been copied in place to your project root.
comby -config migration.toml -f .res -matcher .re -exclude-dir node_modules,__generated__ -iYou should run it twice - once for .res files, and once for .resi. The command below runs for .resi, and the one above for .res.
comby -config migration.toml -f .resi -matcher .re -exclude-dir node_modules,__generated__ -i
`The migration script is a set of instructions that Comby runs in sequence. You're encouraged to take
and tweak it so it fits your needs. Comby is powerful. It can do interactive rewriting and numerous other useful stuff. Check it out, but please note it's _not_ intended to cover all of the migration necessary. You'll still likely need to do a few manual fixes after running the migration scripts.$3
Since the standard library is designed to live in the global scope, you _might_ have your own modules or modules from one of your dependencies whose names collide with the modules from the standard library.
This is a side effect of shipping the standard library as its own package, meaning it won't be a problem if the standard library is adopted and ships with the compiler. At that point you'll be able to have your own modules shadowing builtin modules.
In the meantime, as a workaround:
- For a conflict with your own module, the easiest way to solve this is to just rename your own module to something else.
- For a conflict with a dependency - e.g., Core's
Intl vs. rescript-react-intl's Intl`, you could use patch-package to rename the conflicting module in Core (or remove it altogether if you are not using it).