angular2-rollup


A complete, yet simple, starter for Angular 2 using AOT Compile and Rollup.

- ngr build jit compiles just in time (JIT) using Typescript.

- ngr build dev compiles ahead of time (AOT) using ngc in --watch mode.

- ngr build prod compiles ahead of time (AOT) using ngc, bundles with Rollup and optimizes the build with Closure Compiler.

- ngr build lib runs a build script for component libraries. It uses ngc to make distributed components compatible with (AOT).

Build scripts written with ShellJS allow for cross platform support. A boilerplate Express server is also included with support for LiveReload. We chose this method so anyone could write their own build that fit the needs of their project and use this starter as an example of how to do it.

* Best practices in file and application organization for Angular 2.
* Ready to go build system using ngc, Rollup, and Closure Compiler
* Test Angular 2 code with Jasmine and Karma
* Coverage with Istanbul
* End-to-end Angular 2 code using Protractor.
* Stylesheets with SASS and PostCSS
* Error reporting with TSLint and Codelyzer
* CLI commands for running builds, generating code, and more!

Quick start

- Install the cli and global dependencies

$ npm install -g angular2-rollup webdriver-manager codelyzer rimraf

- Scaffold a new project and install dependencies

``

$ mkdir my-new-app && cd my-new-app
$ ngr scaffold && npm install

`


- Run development build, start up Express Server with LiveReload

$ ngr build dev --serve --watch

When everything is setup correctly, you should be able to visit http://localhost:4200 in your browser.

Table of Contents

* Getting Started
* Dependencies
* Installing
* Developing
* Testing
* Production
* CLI
* Frequently Asked Questions
* License

Getting Started

Dependencies

What you need to run this app:
* node and npm (Use NVM)
* Ensure you're running Node (v6.5.x+)

Installing

Read the Quick Start

$3

Change the host and/or port in /server.config.dev.js if needed. This config is used for the Express Server. /server.config.prod.js is used for production.

`
{
origin: 'localhost',
port: 4200
};

`

Scaffold

To scaffold a new app run ngr --scaffold. This will copy required files into the same directory.

Configuration


ngr is built on a few scripts that handle building Angular using JIT or AOT compilation. The CLI also provides a build used to distrbute Angular libraries.

build.config.js is the main configuration for the builds

karma.conf.js is the main configuration for Karma

rollup.config.js configures Rollup for production

Rollup bundles the app for production. You can configure Rollup for the production build inrollup.config.js. Rollup also bundles the library build. If you scaffold the app with --lib flag you will see addition config files for the library build.

server.config.dev.js and server.config.prod.js configure the Express server

tsconfig.json is boilerplate for VSCode and is not used for production

tsconfig.dev.json configures Typescript in the development (JIT) build

tsconfig.prod.json configures ngc in the production build

Server

Express is used mainly to provide a development server, but it could also be configured for production to run over https.

node server.js is run as a parallel process to the build when using the --serve flag

router.js configures the routes of the Express server

Build

To build the app for development, enable livereload, and start up the server:

* $ ngr build dev --watch --serve

ngr will build the application for development. The dev environment bootstraps Angular with JIT Compiler for fast and efficient development.

Once your work has been validated with the development build, you can also test the production build .

* $ ngr build prod --serve

$3

ngr provides a build for developing Angular libraries that conforms to the Angular Package Spec 4.0 Jason Aden gave a presentation about at ng-conf. Packaging Angular.

To develop component libraries, scaffold an app with the --lib flag.

The name of the library and more is configured in build.config.js.

* $ ngr build lib

Testing

$3

Unit tests use Karma and can be run with the --watch flag.

For single run ngr --test

$3

e2e tests use Protractor and Selenium Webdriver. The process requires multiple tabs to run locally.

* single run:
in a new tab if not already running!*: npm run webdriver:start
* in a tab: ngr build dev --serve
* in a tab: npm run e2e
* interactive mode:
* instead of the last command above, you can run: npm run e2e:live
* when debugging or first writing test suites, you may find it helpful to try out Protractor commands without starting up the entire test suite. You can do this with the element explorer.
* you can learn more about Protractor Interactive Mode here

AOT Production Build

While the development build uses Angular Just In Time (JIT) compilation in conjunction with tsc, the production build uses ngc to compile the Angular 2 application Ahead of Time (AOT). AOT is inherently more secure than JIT and should always be used in a production environment.

Here's how is works:

1. ngc compiles the files in /src to /tmp,

2. Rollup bundles the files and their dependencies into build/bundle.es2015.js.

3. Closure Compiler optimizes the bundle and outputs ES5 for the browser.

$3

In order to build for production, install Closure Compiler. Closure Compiler is the only tool that we found would transpile the ES2015 Rollup Bundle to ES5 with 100% reliability after it was processed with ngc. Closure Compiler is also a great solution because it provides further optimizations to the bundle after ngc and Rollup tree shakes the application. Google uses Closure Compiler internally to optimize JavaScript files for production.

To run Closure Compiler, you need to install the Java SDK. We tested the JavaScript version of Closure Compiler and found it resulted in out of process memory issues with multiple versions of node, so we opted to use the Java implementation. The .jar is installed via npm.

To build an application for production, run the following command.

* $ ngr build prod

You can now deploy the /build folder to your server!

CLI

This starter code includes a CLI that allows you to build and start up an Express Server without npm run. The CLI includes commands for generating new code snippets similar to Angular CLI.

To use the CLI run the command npm install -g while in the root directory of the project, then npm link. webdriver-manager should also be installed globally if it isn't already.

npm install -g
npm link

CLI Commands

#### --help

Displays the help documentation for using ngr

#### build

- ngr build dev Builds development environment
- ngr build prod Builds production environment

NOTE: Use b instead of build


#### generate

- ngr generate component --name todo-list --spec Generate a TodoListComponent in the current directory with a spec file
- ngr generate directive --name todo-list --dir path/to/folder Generate a TodoListDirective in a folder
- ngr g module -n todo-list -r Generate a TodoListModule in a folder with a routes.ts file
- ngr g e2e -n todo-list Generate e2e test


You can pass the following types to generate:

- class
- component
- directive
- enum
- e2e
- guard
- interface
- module
- pipe
- service

EXAMPLE: ngr generate service --name todo-list --dir path/to/folder

You can configure prefixes for Classes, Component and Directive selector in build.config.js. Omit the properties from the config to operate without prefixes. Defaults are included that follow the Angular Styleguide.


#### --serve & --watch

You can choose to run an Express server in parallel with build tasks, with or without Livereload enabled

- ngr build dev --watch --serve Builds development environment, runs Express server with livereload
- ngr serve Runs Express server, make sure you have built beforehand!

Production builds do not require the CLI, just the package.json

- NODE_ENV=prod node server.js --https Run Express server with SSL for production, requires ./conf/ssl/key.pem and ./conf/ssl/cert.pem.

FAQ

How do I include third party libraries?

Follow this step by step questionaire to figure out which method to use.

- Does the library conform to Angular Package Spec 4.0?
YES: Will be bundled by ngc, inject the NgModule into your application
NO: See next question

- Is the library written in ES2015?
YES: Can most likely be bundled with Rollup
NO: See next question

- Is the library formatted with UMD modules?
YES: Edit rollup.config.js so Rollup can bundle the library
NO: You must include the library globally via or SystemJS. Examples of both are in /src/public/index.html


RxJS is bundled as UMD module. In rollup.config.js, use the rollup-plugin-commonjs to bundle it via the Rollup build step.

`
commonjs({
include: 'node_modules/rxjs/**'
}),
`

NOTE: You must configure system.config.js in order to inject third party libaries for development. An example is below:

`
map: {
// angular bundles
'@angular/core': 'lib:@angular/core/bundles/core.umd.js',
'@angular/common': 'lib:@angular/common/bundles/common.umd.js',
'@angular/compiler': 'lib:@angular/compiler/bundles/compiler.umd.js',
'@angular/platform-browser': 'lib:@angular/platform-browser/bundles/platform-browser.umd.js',
'@angular/platform-browser-dynamic': 'lib:@angular/platform-browser-dynamic/bundles/platform-browser-dynamic.umd.js',
'@angular/http': 'lib:@angular/http/bundles/http.umd.js',
'@angular/router': 'lib:@angular/router/bundles/router.umd.js',
'@angular/forms': 'lib:@angular/forms/bundles/forms.umd.js',
// other libraries
'rxjs': 'lib:rxjs',
'firebase': 'lib:firebase/firebase.js',
'firebase/app': 'lib:firebase/firebase.js',
'firebase/database': 'lib:firebase/firebase.js',
'firebase/auth': 'lib:firebase/firebase.js'
},
`


You can include third party dependencies with SystemJS instead of the .

`

`


If a library must be loaded prior to bootstrap, add the folder name in build.config.js to have it copied into build/lib. It is optimal to only include the library files you need for production, not entire folders.

You must also edit public/index.html and the systemjs config files to load libraries prior to the app bootstrapping.


`
module.exports = {
dep: {
lib: [
'core-js',
'reflect-metadata',
'zone.js',
'systemjs',
'@angular',
'rxjs'
],
prodLib: [
'angular-srcs/shims_for_IE.js',
'core-js/client/shim.min.js',
'core-js/client/shim.min.js.map',
'systemjs/dist/system.js',
'zone.js/dist/zone.js'
],
src: './node_modules',
dist: './build/lib'
},
`


#### Bundling libraries written in ES2105 Modules

It is a best practice to tree shake and bundle third party libraries for production, however this process only works with Rollup if the third party library is packaged with ES2015 modules. It is also not recommended to import an entire library that is treeshakable like so:

import Rx from "rxjs/Rx";

While you could do this, it is a best practice to only import the methods of the library your app requires.

`
import "rxjs/add/observable/interval";
import "rxjs/add/operator/take";
import "rxjs/add/operator/map";
import "rxjs/add/operator/bufferCount"

`

If you import an entire library using * for instance, the entire library will be bundled in your application, so import ONLY the methods your application requires for an optimal bundle.

import will only work with libraries packaged with ES2015 modules.

When bundling for production, you may need to also need to update the rollup.config.js file to properly bundle the third party library.

#### Typings

You may also need to inject typings for the ngc service to properly inject dependencies during AOT compilation.

`
"compilerOptions": {
"typeRoots": [ "node_modules/@types" ],
"types": [
"node"
]
}
`


Editing index.html

ngr copies each dependency from node_modules into /build/lib (or wherever you specify in build.config.js). You can then reference the library in src/public/index.html like so:

`





`

ngr uses htmlprocessor to only include the porttions of index.html the app requires for development and production. You can remove chucks of the file for each build.

The typical Angular 2 dependencies are already included in the tag in index.html.

How can I write a custom build?

You could create a custom build to fit the specific needs of your project. It is recommended to duplicate an existing build and start from there.

`
build.env.js

`

In build.env.js:

`
const env = 'dev';
`

This build script includes a constant you should change to the new name of the environment if you also want to augment other settings for Rollup, TypeScript, or PostCSS. Otherwise, you can hijack the dev, prod environments. There is an example of how this could be done in build.lib.js.

When duplicating the development build, you can tweak the tsconfig or PostCSS settings.

`
tsconfig.env.json
postcss.env.json

`

Configuration for build services are in the specific files, while the config for Closure Compiler is found in package.json. If you are duplicating the production build and renaming the environment, you can augment the options for ClosureCompiler:

`
"transpile:env": "java -jar ./compiler.jar --warning_level=QUIET --language_in=ES6 --language_out=ES5 --js ./build/bundle.es2015.js --js_output_file ./build/bundle.js",
`

How do I update my project to the latest CLI?

npm install -g ngr@latest

How do I update my project to the latest versions of Angular?

After you have finished updating the package.json, run the following command:

- $ npm run clean:install

Can I run LiveReload with the Production build?

Livereload is still available in this mode, however you have to go an extra step to unlock this feature for the prod build. We recommend using ngr build dev for development, since JIT compile allows for a faster workflow. In cases where you want to test the production build on a local machine with the watcher you can use the following command: ngr build dev --watch --serve


For livereload to work in the browser for the production build you currently you have to edit src/public/index.html.

Copy the livereload script to the build:remove:dev comment near the end of the file. It should look like the example below.

`






``

It is not recommended that you deploy the livereload script to production.

How do I take advantage of TypeScript in my IDE?

To take full advantage of TypeScript with autocomplete you would have to use an editor with the correct TypeScript plugins.

#### Use a TypeScript-aware editor

We have good experience using these editors:

* Visual Studio Code
* Webstorm 11+
* Atom with TypeScript plugin
* Sublime Text with Typescript-Sublime-Plugin

License

MIT