cloudhub
========

PaaS component of Anypoint Platform


* Usage
* Commands

Usage

``sh-session
$ npm install -g @mulesoft/anypoint-cli-cloudhub-plugin
$ anypoint-cli-cloudhub-plugin COMMAND
running command...
$ anypoint-cli-cloudhub-plugin (--version|-v)
@mulesoft/anypoint-cli-cloudhub-plugin/0.1.0 darwin-arm64 node-v16.15.1
$ anypoint-cli-cloudhub-plugin --help [COMMAND]
USAGE
$ anypoint-cli-cloudhub-plugin COMMAND
...
`

Commands

* anypoint-cli-cloudhub-plugin cloudhub:load-balancer:allowlist:add NAME CIDRBLOCK
* anypoint-cli-cloudhub-plugin cloudhub:load-balancer:allowlist:remove NAME CIDRBLOCK
* [anypoint-cli-cloudhub-plugin cloudhub:load-balancer:create [NAME] [VPC] [CERTIFICATE] [PRIVATEKEY]](#anypoint-cli-cloudhub-plugin-cloudhubload-balancercreate-name-vpc-certificate-privatekey)
* anypoint-cli-cloudhub-plugin cloudhub:load-balancer:delete NAME
* [anypoint-cli-cloudhub-plugin cloudhub:load-balancer:describe [NAME]](#anypoint-cli-cloudhub-plugin-cloudhubload-balancerdescribe-name)
* anypoint-cli-cloudhub-plugin cloudhub:load-balancer:dynamic-ips:disable NAME
* anypoint-cli-cloudhub-plugin cloudhub:load-balancer:dynamic-ips:enable NAME
* anypoint-cli-cloudhub-plugin cloudhub:load-balancer:list
* [anypoint-cli-cloudhub-plugin cloudhub:load-balancer:mappings:add NAME INPUTURI APPNAME APPURI [CERTIFICATENAME]](#anypoint-cli-cloudhub-plugin-cloudhubload-balancermappingsadd-name-inputuri-appname-appuri-certificatename)
* [anypoint-cli-cloudhub-plugin cloudhub:load-balancer:mappings:describe NAME [CERTIFICATENAME]](#anypoint-cli-cloudhub-plugin-cloudhubload-balancermappingsdescribe-name-certificatename)
* [anypoint-cli-cloudhub-plugin cloudhub:load-balancer:mappings:remove NAME INDEX [CERTIFICATENAME]](#anypoint-cli-cloudhub-plugin-cloudhubload-balancermappingsremove-name-index-certificatename)
* anypoint-cli-cloudhub-plugin cloudhub:load-balancer:ssl-endpoint:add NAME CERTIFICATE PRIVATEKEY
* anypoint-cli-cloudhub-plugin cloudhub:load-balancer:ssl-endpoint:describe NAME CERTIFICATENAME
* anypoint-cli-cloudhub-plugin cloudhub:load-balancer:ssl-endpoint:remove NAME CERTIFICATENAME
* anypoint-cli-cloudhub-plugin cloudhub:load-balancer:ssl-endpoint:setDefault NAME CERTIFICATENAME
* [anypoint-cli-cloudhub-plugin cloudhub:load-balancer:start [NAME]](#anypoint-cli-cloudhub-plugin-cloudhubload-balancerstart-name)
* [anypoint-cli-cloudhub-plugin cloudhub:load-balancer:stop [NAME]](#anypoint-cli-cloudhub-plugin-cloudhubload-balancerstop-name)
* anypoint-cli-cloudhub-plugin cloudhub:load-balancer:whitelist:add NAME CIDRBLOCK
* anypoint-cli-cloudhub-plugin cloudhub:load-balancer:whitelist:remove NAME CIDRBLOCK
* [anypoint-cli-cloudhub-plugin cloudhub:region:list [FILE]](#anypoint-cli-cloudhub-plugin-cloudhubregionlist-file)
* anypoint-cli-cloudhub-plugin cloudhub:runtime:list
* anypoint-cli-cloudhub-plugin cloudhub:vpc:business-groups:add VPC BUSINESSGROUPS...
* anypoint-cli-cloudhub-plugin cloudhub:vpc:business-groups:remove VPC BUSINESSGROUPS...
* [anypoint-cli-cloudhub-plugin cloudhub:vpc:create NAME REGION CIDRBLOCK [ENVIRONMENTS]](#anypoint-cli-cloudhub-plugin-cloudhubvpccreate-name-region-cidrblock-environments)
* anypoint-cli-cloudhub-plugin cloudhub:vpc:delete NAME
* [anypoint-cli-cloudhub-plugin cloudhub:vpc:describe [NAME]](#anypoint-cli-cloudhub-plugin-cloudhubvpcdescribe-name)
* anypoint-cli-cloudhub-plugin cloudhub:vpc:dns-servers:set NAME
* anypoint-cli-cloudhub-plugin cloudhub:vpc:dns-servers:unset NAME
* anypoint-cli-cloudhub-plugin cloudhub:vpc:environments:add VPC ENVIRONMENTS...
* anypoint-cli-cloudhub-plugin cloudhub:vpc:environments:remove VPC ENVIRONMENTS...
* anypoint-cli-cloudhub-plugin cloudhub:vpc:firewall-rules:add VPC CIDRBLOCK PROTOCOL FROMPORT TOPORT
* anypoint-cli-cloudhub-plugin cloudhub:vpc:firewall-rules:describe NAME
* anypoint-cli-cloudhub-plugin cloudhub:vpc:firewall-rules:remove VPC INDEX
* anypoint-cli-cloudhub-plugin cloudhub:vpc:list
* [anypoint-cli-cloudhub-plugin conf [KEY] [VALUE]](#anypoint-cli-cloudhub-plugin-conf-key-value)
* [anypoint-cli-cloudhub-plugin help [COMMAND]](#anypoint-cli-cloudhub-plugin-help-command)
* anypoint-cli-cloudhub-plugin runtime-mgr:application:delete NAME
* anypoint-cli-cloudhub-plugin runtime-mgr:application:deploy NAME DEPLOYMENTTARGETID RUNTIMEVERSION ARTIFACTID
* anypoint-cli-cloudhub-plugin runtime-mgr:application:describe APPID
* anypoint-cli-cloudhub-plugin runtime-mgr:application:download-logs APPID SPECID DIRECTORY
* anypoint-cli-cloudhub-plugin runtime-mgr:application:list
* anypoint-cli-cloudhub-plugin runtime-mgr:application:logs APPID SPECID
* anypoint-cli-cloudhub-plugin runtime-mgr:application:modify APPID
* anypoint-cli-cloudhub-plugin runtime-mgr:application:start APPID
* anypoint-cli-cloudhub-plugin runtime-mgr:application:stop APPID
* [anypoint-cli-cloudhub-plugin runtime-mgr:cloudhub-alert-history:describe [NAME]](#anypoint-cli-cloudhub-plugin-runtime-mgrcloudhub-alert-historydescribe-name)
* anypoint-cli-cloudhub-plugin runtime-mgr:cloudhub-alert:list
* anypoint-cli-cloudhub-plugin runtime-mgr:cloudhub-application:copy SOURCE TARGET
* anypoint-cli-cloudhub-plugin runtime-mgr:cloudhub-application:copy-replace SOURCE TARGET
* anypoint-cli-cloudhub-plugin runtime-mgr:cloudhub-application:delete NAME
* anypoint-cli-cloudhub-plugin runtime-mgr:cloudhub-application:deploy NAME ZIPFILE
* anypoint-cli-cloudhub-plugin runtime-mgr:cloudhub-application:describe NAME
* anypoint-cli-cloudhub-plugin runtime-mgr:cloudhub-application:download-logs NAME DIRECTORY
* anypoint-cli-cloudhub-plugin runtime-mgr:cloudhub-application:list
* [anypoint-cli-cloudhub-plugin runtime-mgr:cloudhub-application:modify NAME [ZIPFILE]](#anypoint-cli-cloudhub-plugin-runtime-mgrcloudhub-applicationmodify-name-zipfile)
* anypoint-cli-cloudhub-plugin runtime-mgr:cloudhub-application:restart APPLICATIONNAME
* anypoint-cli-cloudhub-plugin runtime-mgr:cloudhub-application:revert-runtime NAME
* anypoint-cli-cloudhub-plugin runtime-mgr:cloudhub-application:start APPLICATIONNAME
* anypoint-cli-cloudhub-plugin runtime-mgr:cloudhub-application:stop APPLICATIONNAME
* anypoint-cli-cloudhub-plugin runtime-mgr:cloudhub-application:tail-logs NAME
* anypoint-cli-cloudhub-plugin version

anypoint-cli-cloudhub-plugin cloudhub:load-balancer:allowlist:add NAME CIDRBLOCK

Add an IP or range of IPs to the Load balancer allowlist

`
USAGE
$ anypoint-cli-cloudhub-plugin cloudhub:load-balancer:allowlist:add [NAME] [CIDRBLOCK] [--password [--username |
--client_id | ]] [--client_secret ] [--bearer | | ] [--organization ] [--environment
] [--host ] [--collectMetrics] [-h]

FLAGS
-h, --help Show CLI help.
--bearer= Token Bearer. You can define this in the ANYPOINT_BEARER environment variable.
--client_id= Client ID. You can define this in the ANYPOINT_CLIENT_ID environment variable.
--client_secret= Client Secret. You can define this in the ANYPOINT_CLIENT_SECRET environment variable.
--collectMetrics collect metrics. You can define this in the COLLECT_METRICS environment variable.
--environment= Environment Name. You can define this in the ANYPOINT_ENV environment variable.
--host=anypoint.mulesoft.com [default: anypoint.mulesoft.com] Host URL. You can define this in the ANYPOINT_HOST
environment variable.
--organization= Organization Name. You can define this in the ANYPOINT_ORG environment variable.
--password= Password. You can define this in the ANYPOINT_PASSWORD environment variable.
--username= Username. You can define this in the ANYPOINT_USERNAME environment variable.

DESCRIPTION
Add an IP or range of IPs to the Load balancer allowlist
`

_See code: src/commands/cloudhub/load-balancer/allowlist/add.ts_

anypoint-cli-cloudhub-plugin cloudhub:load-balancer:allowlist:remove NAME CIDRBLOCK

Remove an IP or range of IPs from the Load balancer allowlist

`
USAGE
$ anypoint-cli-cloudhub-plugin cloudhub:load-balancer:allowlist:remove [NAME] [CIDRBLOCK] [--password [--username |
--client_id | ]] [--client_secret ] [--bearer | | ] [--organization ] [--environment
] [--host ] [--collectMetrics] [-h]

FLAGS
-h, --help Show CLI help.
--bearer= Token Bearer. You can define this in the ANYPOINT_BEARER environment variable.
--client_id= Client ID. You can define this in the ANYPOINT_CLIENT_ID environment variable.
--client_secret= Client Secret. You can define this in the ANYPOINT_CLIENT_SECRET environment variable.
--collectMetrics collect metrics. You can define this in the COLLECT_METRICS environment variable.
--environment= Environment Name. You can define this in the ANYPOINT_ENV environment variable.
--host=anypoint.mulesoft.com [default: anypoint.mulesoft.com] Host URL. You can define this in the ANYPOINT_HOST
environment variable.
--organization= Organization Name. You can define this in the ANYPOINT_ORG environment variable.
--password= Password. You can define this in the ANYPOINT_PASSWORD environment variable.
--username= Username. You can define this in the ANYPOINT_USERNAME environment variable.

DESCRIPTION
Remove an IP or range of IPs from the Load balancer allowlist
`

_See code: src/commands/cloudhub/load-balancer/allowlist/remove.ts_

anypoint-cli-cloudhub-plugin cloudhub:load-balancer:create [NAME] [VPC] [CERTIFICATE] [PRIVATEKEY]

Create a Load balancer

`
USAGE
$ anypoint-cli-cloudhub-plugin cloudhub:load-balancer:create [NAME] [VPC] [CERTIFICATE] [PRIVATEKEY] [--password
[--username | --client_id | ]] [--client_secret ] [--bearer | | ] [--organization
] [--environment ] [--host ] [--collectMetrics] [-h] [--http on|off|redirect]
[--clientCertificate ] [--verificationMode on|off|optional] [--crl ] [--dynamic-ips] [--transportDownstreamProtocols TLSv1.2|TLSv1.3]
[--transportUpstreamProtocols TLSv1.2|TLSv1.3]

FLAGS
-h, --help Show CLI help.
--bearer= Token Bearer. You can define this in the ANYPOINT_BEARER environment variable.
--clientCertificate=
--client_id= Client ID. You can define this in the ANYPOINT_CLIENT_ID environment variable.
--client_secret= Client Secret. You can define this in the ANYPOINT_CLIENT_SECRET environment variable.
--collectMetrics collect metrics. You can define this in the COLLECT_METRICS environment variable.
--crl=
--[no-]dynamic-ips
--environment= Environment Name. You can define this in the ANYPOINT_ENV environment variable.
--host=anypoint.mulesoft.com [default: anypoint.mulesoft.com] Host URL. You can define this in the ANYPOINT_HOST
environment variable.
--http=
--organization= Organization Name. You can define this in the ANYPOINT_ORG environment variable.
--password= Password. You can define this in the ANYPOINT_PASSWORD environment variable.
--username= Username. You can define this in the ANYPOINT_USERNAME environment variable.
--transportDownstreamProtocols TLS version used for communication between customer and DLB
--transportUpstreamProtocols TLS version used for communication between DLB and Mule worker
--verificationMode=

DESCRIPTION
Create a Load balancer
`

_See code: src/commands/cloudhub/load-balancer/create.ts_

anypoint-cli-cloudhub-plugin cloudhub:load-balancer:delete NAME

Delete a Load balancer

`
USAGE
$ anypoint-cli-cloudhub-plugin cloudhub:load-balancer:delete [NAME] [--password [--username | --client_id
| ]] [--client_secret ] [--bearer | | ] [--organization ] [--environment ] [--host
] [--collectMetrics] [-h]

FLAGS
-h, --help Show CLI help.
--bearer= Token Bearer. You can define this in the ANYPOINT_BEARER environment variable.
--client_id= Client ID. You can define this in the ANYPOINT_CLIENT_ID environment variable.
--client_secret= Client Secret. You can define this in the ANYPOINT_CLIENT_SECRET environment variable.
--collectMetrics collect metrics. You can define this in the COLLECT_METRICS environment variable.
--environment= Environment Name. You can define this in the ANYPOINT_ENV environment variable.
--host=anypoint.mulesoft.com [default: anypoint.mulesoft.com] Host URL. You can define this in the ANYPOINT_HOST
environment variable.
--organization= Organization Name. You can define this in the ANYPOINT_ORG environment variable.
--password= Password. You can define this in the ANYPOINT_PASSWORD environment variable.
--username= Username. You can define this in the ANYPOINT_USERNAME environment variable.

DESCRIPTION
Delete a Load balancer
`

_See code: src/commands/cloudhub/load-balancer/delete.ts_

anypoint-cli-cloudhub-plugin cloudhub:load-balancer:describe [NAME]

Show LB details

`
USAGE
$ anypoint-cli-cloudhub-plugin cloudhub:load-balancer:describe [NAME] [--password [--username | --client_id
| ]] [--client_secret ] [--bearer | | ] [--organization ] [--environment ] [--host
] [--collectMetrics] [-h] [-o ]

FLAGS
-h, --help Show CLI help.
-o, --output= [default: table] Format for commands output. Supported values are table (default) and
json
--bearer= Token Bearer. You can define this in the ANYPOINT_BEARER environment variable.
--client_id= Client ID. You can define this in the ANYPOINT_CLIENT_ID environment variable.
--client_secret= Client Secret. You can define this in the ANYPOINT_CLIENT_SECRET environment variable.
--collectMetrics collect metrics. You can define this in the COLLECT_METRICS environment variable.
--environment= Environment Name. You can define this in the ANYPOINT_ENV environment variable.
--host=anypoint.mulesoft.com [default: anypoint.mulesoft.com] Host URL. You can define this in the ANYPOINT_HOST
environment variable.
--organization= Organization Name. You can define this in the ANYPOINT_ORG environment variable.
--password= Password. You can define this in the ANYPOINT_PASSWORD environment variable.
--username= Username. You can define this in the ANYPOINT_USERNAME environment variable.

DESCRIPTION
Show LB details
`

_See code: src/commands/cloudhub/load-balancer/describe.ts_

anypoint-cli-cloudhub-plugin cloudhub:load-balancer:dynamic-ips:disable NAME

Disables dynamic IPs

`
USAGE
$ anypoint-cli-cloudhub-plugin cloudhub:load-balancer:dynamic-ips:disable [NAME] [--password [--username | --client_id
| ]] [--client_secret ] [--bearer | | ] [--organization ] [--environment ] [--host
] [--collectMetrics] [-h]

FLAGS
-h, --help Show CLI help.
--bearer= Token Bearer. You can define this in the ANYPOINT_BEARER environment variable.
--client_id= Client ID. You can define this in the ANYPOINT_CLIENT_ID environment variable.
--client_secret= Client Secret. You can define this in the ANYPOINT_CLIENT_SECRET environment variable.
--collectMetrics collect metrics. You can define this in the COLLECT_METRICS environment variable.
--environment= Environment Name. You can define this in the ANYPOINT_ENV environment variable.
--host=anypoint.mulesoft.com [default: anypoint.mulesoft.com] Host URL. You can define this in the ANYPOINT_HOST
environment variable.
--organization= Organization Name. You can define this in the ANYPOINT_ORG environment variable.
--password= Password. You can define this in the ANYPOINT_PASSWORD environment variable.
--username= Username. You can define this in the ANYPOINT_USERNAME environment variable.

DESCRIPTION
Disables dynamic IPs
`

_See code: src/commands/cloudhub/load-balancer/dynamic-ips/disable.ts_

anypoint-cli-cloudhub-plugin cloudhub:load-balancer:dynamic-ips:enable NAME

Enables dynamic IPs

`
USAGE
$ anypoint-cli-cloudhub-plugin cloudhub:load-balancer:dynamic-ips:enable [NAME] [--password [--username | --client_id
| ]] [--client_secret ] [--bearer | | ] [--organization ] [--environment ] [--host
] [--collectMetrics] [-h]

FLAGS
-h, --help Show CLI help.
--bearer= Token Bearer. You can define this in the ANYPOINT_BEARER environment variable.
--client_id= Client ID. You can define this in the ANYPOINT_CLIENT_ID environment variable.
--client_secret= Client Secret. You can define this in the ANYPOINT_CLIENT_SECRET environment variable.
--collectMetrics collect metrics. You can define this in the COLLECT_METRICS environment variable.
--environment= Environment Name. You can define this in the ANYPOINT_ENV environment variable.
--host=anypoint.mulesoft.com [default: anypoint.mulesoft.com] Host URL. You can define this in the ANYPOINT_HOST
environment variable.
--organization= Organization Name. You can define this in the ANYPOINT_ORG environment variable.
--password= Password. You can define this in the ANYPOINT_PASSWORD environment variable.
--username= Username. You can define this in the ANYPOINT_USERNAME environment variable.

DESCRIPTION
Enables dynamic IPs
`

_See code: src/commands/cloudhub/load-balancer/dynamic-ips/enable.ts_

anypoint-cli-cloudhub-plugin cloudhub:load-balancer:list

Lists all Load balancers in an organization

`
USAGE
$ anypoint-cli-cloudhub-plugin cloudhub:load-balancer:list [--password [--username | --client_id | ]]
[--client_secret ] [--bearer | | ] [--organization ] [--environment ] [--host
] [--collectMetrics] [-h] [-o ]

FLAGS
-h, --help Show CLI help.
-o, --output= [default: table] Format for commands output. Supported values are table (default) and
json
--bearer= Token Bearer. You can define this in the ANYPOINT_BEARER environment variable.
--client_id= Client ID. You can define this in the ANYPOINT_CLIENT_ID environment variable.
--client_secret= Client Secret. You can define this in the ANYPOINT_CLIENT_SECRET environment variable.
--collectMetrics collect metrics. You can define this in the COLLECT_METRICS environment variable.
--environment= Environment Name. You can define this in the ANYPOINT_ENV environment variable.
--host=anypoint.mulesoft.com [default: anypoint.mulesoft.com] Host URL. You can define this in the ANYPOINT_HOST
environment variable.
--organization= Organization Name. You can define this in the ANYPOINT_ORG environment variable.
--password= Password. You can define this in the ANYPOINT_PASSWORD environment variable.
--username= Username. You can define this in the ANYPOINT_USERNAME environment variable.

DESCRIPTION
Lists all Load balancers in an organization
`

_See code: src/commands/cloudhub/load-balancer/list.ts_

anypoint-cli-cloudhub-plugin cloudhub:load-balancer:mappings:add NAME INPUTURI APPNAME APPURI [CERTIFICATENAME]

Add a proxy mapping rule at index 0If no certificateName is given, the mappings is added to the default SSL endpoint

`
USAGE
$ anypoint-cli-cloudhub-plugin cloudhub:load-balancer:mappings:add [NAME] [INPUTURI] [APPNAME] [APPURI] [CERTIFICATENAME] [--password
[--username | --client_id | ]] [--client_secret ] [--bearer | | ]
[--organization ] [--environment ] [--host ] [--collectMetrics] [-h] [--upstreamProtocol
]

FLAGS
-h, --help Show CLI help.
--bearer= Token Bearer. You can define this in the ANYPOINT_BEARER environment variable.
--client_id= Client ID. You can define this in the ANYPOINT_CLIENT_ID environment variable.
--client_secret= Client Secret. You can define this in the ANYPOINT_CLIENT_SECRET environment variable.
--collectMetrics collect metrics. You can define this in the COLLECT_METRICS environment variable.
--environment= Environment Name. You can define this in the ANYPOINT_ENV environment variable.
--host=anypoint.mulesoft.com [default: anypoint.mulesoft.com] Host URL. You can define this in the ANYPOINT_HOST
environment variable.
--organization= Organization Name. You can define this in the ANYPOINT_ORG environment variable.
--password= Password. You can define this in the ANYPOINT_PASSWORD environment variable.
--upstreamProtocol= Look for upstream applications in HTTP port 8091 or HTTPS port 8092. Supported Values:
http, https
--username= Username. You can define this in the ANYPOINT_USERNAME environment variable.

DESCRIPTION
Add a proxy mapping rule at index 0If no certificateName is given, the mappings is added to the default SSL endpoint
`

_See code: src/commands/cloudhub/load-balancer/mappings/add.ts_

anypoint-cli-cloudhub-plugin cloudhub:load-balancer:mappings:describe NAME [CERTIFICATENAME]

Lists the proxy mapping rules for a Load balancer. If no certificateName is given, the mappings for the default SSL endpoint are shown

`
USAGE
$ anypoint-cli-cloudhub-plugin cloudhub:load-balancer:mappings:describe [NAME] [CERTIFICATENAME] [--password [--username |
--client_id | ]] [--client_secret ] [--bearer | | ] [--organization ] [--environment
] [--host ] [--collectMetrics] [-h] [-o ]

FLAGS
-h, --help Show CLI help.
-o, --output= [default: table] Format for commands output. Supported values are table (default) and
json
--bearer= Token Bearer. You can define this in the ANYPOINT_BEARER environment variable.
--client_id= Client ID. You can define this in the ANYPOINT_CLIENT_ID environment variable.
--client_secret= Client Secret. You can define this in the ANYPOINT_CLIENT_SECRET environment variable.
--collectMetrics collect metrics. You can define this in the COLLECT_METRICS environment variable.
--environment= Environment Name. You can define this in the ANYPOINT_ENV environment variable.
--host=anypoint.mulesoft.com [default: anypoint.mulesoft.com] Host URL. You can define this in the ANYPOINT_HOST
environment variable.
--organization= Organization Name. You can define this in the ANYPOINT_ORG environment variable.
--password= Password. You can define this in the ANYPOINT_PASSWORD environment variable.
--username= Username. You can define this in the ANYPOINT_USERNAME environment variable.

DESCRIPTION
Lists the proxy mapping rules for a Load balancer. If no certificateName is given, the mappings for the default SSL
endpoint are shown
`

_See code: src/commands/cloudhub/load-balancer/mappings/describe.ts_

anypoint-cli-cloudhub-plugin cloudhub:load-balancer:mappings:remove NAME INDEX [CERTIFICATENAME]

Remove a proxy mapping ruleIf no certificateName is given, the mapping is removed from the default SSL endpoint

`
USAGE
$ anypoint-cli-cloudhub-plugin cloudhub:load-balancer:mappings:remove [NAME] [INDEX] [CERTIFICATENAME] [--password [--username
| --client_id | ]] [--client_secret ] [--bearer | | ] [--organization ]
[--environment ] [--host ] [--collectMetrics] [-h]

FLAGS
-h, --help Show CLI help.
--bearer= Token Bearer. You can define this in the ANYPOINT_BEARER environment variable.
--client_id= Client ID. You can define this in the ANYPOINT_CLIENT_ID environment variable.
--client_secret= Client Secret. You can define this in the ANYPOINT_CLIENT_SECRET environment variable.
--collectMetrics collect metrics. You can define this in the COLLECT_METRICS environment variable.
--environment= Environment Name. You can define this in the ANYPOINT_ENV environment variable.
--host=anypoint.mulesoft.com [default: anypoint.mulesoft.com] Host URL. You can define this in the ANYPOINT_HOST
environment variable.
--organization= Organization Name. You can define this in the ANYPOINT_ORG environment variable.
--password= Password. You can define this in the ANYPOINT_PASSWORD environment variable.
--username= Username. You can define this in the ANYPOINT_USERNAME environment variable.

DESCRIPTION
Remove a proxy mapping ruleIf no certificateName is given, the mapping is removed from the default SSL endpoint
`

_See code: src/commands/cloudhub/load-balancer/mappings/remove.ts_

anypoint-cli-cloudhub-plugin cloudhub:load-balancer:ssl-endpoint:add NAME CERTIFICATE PRIVATEKEY

Add an additional certificate to an existing Load balancer

`
USAGE
$ anypoint-cli-cloudhub-plugin cloudhub:load-balancer:ssl-endpoint:add [NAME] [CERTIFICATE] [PRIVATEKEY] [--password [--username
| --client_id | ]] [--client_secret ] [--bearer | | ] [--organization ]
[--environment ] [--host ] [--collectMetrics] [-h] [--clientCertificate ] [--verificationMode
off|on|optional] [--crl ]

FLAGS
-h, --help Show CLI help.
--bearer= Token Bearer. You can define this in the ANYPOINT_BEARER environment variable.
--clientCertificate= Client certificate file
--client_id= Client ID. You can define this in the ANYPOINT_CLIENT_ID environment variable.
--client_secret= Client Secret. You can define this in the ANYPOINT_CLIENT_SECRET environment variable.
--collectMetrics collect metrics. You can define this in the COLLECT_METRICS environment variable.
--crl= Certificate Revocation List file
--environment= Environment Name. You can define this in the ANYPOINT_ENV environment variable.
--host=anypoint.mulesoft.com [default: anypoint.mulesoft.com] Host URL. You can define this in the ANYPOINT_HOST
environment variable.
--organization= Organization Name. You can define this in the ANYPOINT_ORG environment variable.
--password= Password. You can define this in the ANYPOINT_PASSWORD environment variable.
--username= Username. You can define this in the ANYPOINT_USERNAME environment variable.
--verificationMode= Specifies the client verification mode


DESCRIPTION
Add an additional certificate to an existing Load balancer
`

_See code: src/commands/cloudhub/load-balancer/ssl-endpoint/add.ts_

anypoint-cli-cloudhub-plugin cloudhub:load-balancer:ssl-endpoint:describe NAME CERTIFICATENAME

Show the Load balancer configuration for a particular certificate

`
USAGE
$ anypoint-cli-cloudhub-plugin cloudhub:load-balancer:ssl-endpoint:describe [NAME] [CERTIFICATENAME] [--password [--username |
--client_id | ]] [--client_secret ] [--bearer | | ] [--organization ] [--environment
] [--host ] [--collectMetrics] [-h] [-o ]

FLAGS
-h, --help Show CLI help.
-o, --output= [default: table] Format for commands output. Supported values are table (default) and
json
--bearer= Token Bearer. You can define this in the ANYPOINT_BEARER environment variable.
--client_id= Client ID. You can define this in the ANYPOINT_CLIENT_ID environment variable.
--client_secret= Client Secret. You can define this in the ANYPOINT_CLIENT_SECRET environment variable.
--collectMetrics collect metrics. You can define this in the COLLECT_METRICS environment variable.
--environment= Environment Name. You can define this in the ANYPOINT_ENV environment variable.
--host=anypoint.mulesoft.com [default: anypoint.mulesoft.com] Host URL. You can define this in the ANYPOINT_HOST
environment variable.
--organization= Organization Name. You can define this in the ANYPOINT_ORG environment variable.
--password= Password. You can define this in the ANYPOINT_PASSWORD environment variable.
--username= Username. You can define this in the ANYPOINT_USERNAME environment variable.

DESCRIPTION
Show the Load balancer configuration for a particular certificate
`

_See code: src/commands/cloudhub/load-balancer/ssl-endpoint/describe.ts_

anypoint-cli-cloudhub-plugin cloudhub:load-balancer:ssl-endpoint:remove NAME CERTIFICATENAME

Remove a certificate from a Load balancer

`
USAGE
$ anypoint-cli-cloudhub-plugin cloudhub:load-balancer:ssl-endpoint:remove [NAME] [CERTIFICATENAME] [--password [--username |
--client_id | ]] [--client_secret ] [--bearer | | ] [--organization ] [--environment
] [--host ] [--collectMetrics] [-h]

FLAGS
-h, --help Show CLI help.
--bearer= Token Bearer. You can define this in the ANYPOINT_BEARER environment variable.
--client_id= Client ID. You can define this in the ANYPOINT_CLIENT_ID environment variable.
--client_secret= Client Secret. You can define this in the ANYPOINT_CLIENT_SECRET environment variable.
--collectMetrics collect metrics. You can define this in the COLLECT_METRICS environment variable.
--environment= Environment Name. You can define this in the ANYPOINT_ENV environment variable.
--host=anypoint.mulesoft.com [default: anypoint.mulesoft.com] Host URL. You can define this in the ANYPOINT_HOST
environment variable.
--organization= Organization Name. You can define this in the ANYPOINT_ORG environment variable.
--password= Password. You can define this in the ANYPOINT_PASSWORD environment variable.
--username= Username. You can define this in the ANYPOINT_USERNAME environment variable.

DESCRIPTION
Remove a certificate from a Load balancer
`

_See code: src/commands/cloudhub/load-balancer/ssl-endpoint/remove.ts_

anypoint-cli-cloudhub-plugin cloudhub:load-balancer:ssl-endpoint:setDefault NAME CERTIFICATENAME

Set the default certificate that the Load balancer will serve

`
USAGE
$ anypoint-cli-cloudhub-plugin cloudhub:load-balancer:ssl-endpoint:setDefault [NAME] [CERTIFICATENAME] [--password [--username |
--client_id | ]] [--client_secret ] [--bearer | | ] [--organization ] [--environment
] [--host ] [--collectMetrics] [-h] [--http on|off|redirect]

FLAGS
-h, --help Show CLI help.
--bearer= Token Bearer. You can define this in the ANYPOINT_BEARER environment variable.
--client_id= Client ID. You can define this in the ANYPOINT_CLIENT_ID environment variable.
--client_secret= Client Secret. You can define this in the ANYPOINT_CLIENT_SECRET environment variable.
--collectMetrics collect metrics. You can define this in the COLLECT_METRICS environment variable.
--environment= Environment Name. You can define this in the ANYPOINT_ENV environment variable.
--host=anypoint.mulesoft.com [default: anypoint.mulesoft.com] Host URL. You can define this in the ANYPOINT_HOST
environment variable.
--http=
--organization= Organization Name. You can define this in the ANYPOINT_ORG environment variable.
--password= Password. You can define this in the ANYPOINT_PASSWORD environment variable.
--username= Username. You can define this in the ANYPOINT_USERNAME environment variable.

DESCRIPTION
Set the default certificate that the Load balancer will serve
`

_See code: src/commands/cloudhub/load-balancer/ssl-endpoint/setDefault.ts_

anypoint-cli-cloudhub-plugin cloudhub:load-balancer:start [NAME]

Starts a Load balancer

`
USAGE
$ anypoint-cli-cloudhub-plugin cloudhub:load-balancer:start [NAME] [--password [--username | --client_id
| ]] [--client_secret ] [--bearer | | ] [--organization ] [--environment ] [--host
] [--collectMetrics] [-h]

FLAGS
-h, --help Show CLI help.
--bearer= Token Bearer. You can define this in the ANYPOINT_BEARER environment variable.
--client_id= Client ID. You can define this in the ANYPOINT_CLIENT_ID environment variable.
--client_secret= Client Secret. You can define this in the ANYPOINT_CLIENT_SECRET environment variable.
--collectMetrics collect metrics. You can define this in the COLLECT_METRICS environment variable.
--environment= Environment Name. You can define this in the ANYPOINT_ENV environment variable.
--host=anypoint.mulesoft.com [default: anypoint.mulesoft.com] Host URL. You can define this in the ANYPOINT_HOST
environment variable.
--organization= Organization Name. You can define this in the ANYPOINT_ORG environment variable.
--password= Password. You can define this in the ANYPOINT_PASSWORD environment variable.
--username= Username. You can define this in the ANYPOINT_USERNAME environment variable.

DESCRIPTION
Starts a Load balancer
`

_See code: src/commands/cloudhub/load-balancer/start.ts_

anypoint-cli-cloudhub-plugin cloudhub:load-balancer:stop [NAME]

Stops a Load balancer

`
USAGE
$ anypoint-cli-cloudhub-plugin cloudhub:load-balancer:stop [NAME] [--password [--username | --client_id
| ]] [--client_secret ] [--bearer | | ] [--organization ] [--environment ] [--host
] [--collectMetrics] [-h]

FLAGS
-h, --help Show CLI help.
--bearer= Token Bearer. You can define this in the ANYPOINT_BEARER environment variable.
--client_id= Client ID. You can define this in the ANYPOINT_CLIENT_ID environment variable.
--client_secret= Client Secret. You can define this in the ANYPOINT_CLIENT_SECRET environment variable.
--collectMetrics collect metrics. You can define this in the COLLECT_METRICS environment variable.
--environment= Environment Name. You can define this in the ANYPOINT_ENV environment variable.
--host=anypoint.mulesoft.com [default: anypoint.mulesoft.com] Host URL. You can define this in the ANYPOINT_HOST
environment variable.
--organization= Organization Name. You can define this in the ANYPOINT_ORG environment variable.
--password= Password. You can define this in the ANYPOINT_PASSWORD environment variable.
--username= Username. You can define this in the ANYPOINT_USERNAME environment variable.

DESCRIPTION
Stops a Load balancer
`

_See code: src/commands/cloudhub/load-balancer/stop.ts_

anypoint-cli-cloudhub-plugin cloudhub:load-balancer:whitelist:add NAME CIDRBLOCK

Add an IP or range of IPs to the Load balancer allowlist

`
USAGE
$ anypoint-cli-cloudhub-plugin cloudhub:load-balancer:whitelist:add [NAME] [CIDRBLOCK] [--password [--username |
--client_id | ]] [--client_secret ] [--bearer | | ] [--organization ] [--environment
] [--host ] [--collectMetrics] [-h]

FLAGS
-h, --help Show CLI help.
--bearer= Token Bearer. You can define this in the ANYPOINT_BEARER environment variable.
--client_id= Client ID. You can define this in the ANYPOINT_CLIENT_ID environment variable.
--client_secret= Client Secret. You can define this in the ANYPOINT_CLIENT_SECRET environment variable.
--collectMetrics collect metrics. You can define this in the COLLECT_METRICS environment variable.
--environment= Environment Name. You can define this in the ANYPOINT_ENV environment variable.
--host=anypoint.mulesoft.com [default: anypoint.mulesoft.com] Host URL. You can define this in the ANYPOINT_HOST
environment variable.
--organization= Organization Name. You can define this in the ANYPOINT_ORG environment variable.
--password= Password. You can define this in the ANYPOINT_PASSWORD environment variable.
--username= Username. You can define this in the ANYPOINT_USERNAME environment variable.

DESCRIPTION
Add an IP or range of IPs to the Load balancer allowlist
`

_See code: src/commands/cloudhub/load-balancer/whitelist/add.ts_

anypoint-cli-cloudhub-plugin cloudhub:load-balancer:whitelist:remove NAME CIDRBLOCK

Remove an IP or range of IPs from the Load balancer allowlist

`
USAGE
$ anypoint-cli-cloudhub-plugin cloudhub:load-balancer:whitelist:remove [NAME] [CIDRBLOCK] [--password [--username |
--client_id | ]] [--client_secret ] [--bearer | | ] [--organization ] [--environment
] [--host ] [--collectMetrics] [-h]

FLAGS
-h, --help Show CLI help.
--bearer= Token Bearer. You can define this in the ANYPOINT_BEARER environment variable.
--client_id= Client ID. You can define this in the ANYPOINT_CLIENT_ID environment variable.
--client_secret= Client Secret. You can define this in the ANYPOINT_CLIENT_SECRET environment variable.
--collectMetrics collect metrics. You can define this in the COLLECT_METRICS environment variable.
--environment= Environment Name. You can define this in the ANYPOINT_ENV environment variable.
--host=anypoint.mulesoft.com [default: anypoint.mulesoft.com] Host URL. You can define this in the ANYPOINT_HOST
environment variable.
--organization= Organization Name. You can define this in the ANYPOINT_ORG environment variable.
--password= Password. You can define this in the ANYPOINT_PASSWORD environment variable.
--username= Username. You can define this in the ANYPOINT_USERNAME environment variable.

DESCRIPTION
Remove an IP or range of IPs from the Load balancer allowlist
`

_See code: src/commands/cloudhub/load-balancer/whitelist/remove.ts_

anypoint-cli-cloudhub-plugin cloudhub:region:list [FILE]

Lists all supported regions

`
USAGE
$ anypoint-cli-cloudhub-plugin cloudhub:region:list [FILE] [--password [--username | --client_id
| ]] [--client_secret ] [--bearer | | ] [--organization ] [--environment ] [--host
] [--collectMetrics] [-h] [-o ]

FLAGS
-h, --help Show CLI help.
-o, --output= [default: table] Format for commands output. Supported values are table (default) and
json
--bearer= Token Bearer. You can define this in the ANYPOINT_BEARER environment variable.
--client_id= Client ID. You can define this in the ANYPOINT_CLIENT_ID environment variable.
--client_secret= Client Secret. You can define this in the ANYPOINT_CLIENT_SECRET environment variable.
--collectMetrics collect metrics. You can define this in the COLLECT_METRICS environment variable.
--environment= Environment Name. You can define this in the ANYPOINT_ENV environment variable.
--host=anypoint.mulesoft.com [default: anypoint.mulesoft.com] Host URL. You can define this in the ANYPOINT_HOST
environment variable.
--organization= Organization Name. You can define this in the ANYPOINT_ORG environment variable.
--password= Password. You can define this in the ANYPOINT_PASSWORD environment variable.
--username= Username. You can define this in the ANYPOINT_USERNAME environment variable.

DESCRIPTION
Lists all supported regions
`

_See code: src/commands/cloudhub/region/list.ts_

anypoint-cli-cloudhub-plugin cloudhub:runtime:list

Lists all Mule Runtimes

`
USAGE
$ anypoint-cli-cloudhub-plugin cloudhub:runtime:list [--password [--username | --client_id | ]]
[--client_secret ] [--bearer | | ] [--organization ] [--environment ] [--host
] [--collectMetrics] [-h] [-o ]

FLAGS
-h, --help Show CLI help.
-o, --output= [default: table] Format for commands output. Supported values are table (default) and
json
--bearer= Token Bearer. You can define this in the ANYPOINT_BEARER environment variable.
--client_id= Client ID. You can define this in the ANYPOINT_CLIENT_ID environment variable.
--client_secret= Client Secret. You can define this in the ANYPOINT_CLIENT_SECRET environment variable.
--collectMetrics collect metrics. You can define this in the COLLECT_METRICS environment variable.
--environment= Environment Name. You can define this in the ANYPOINT_ENV environment variable.
--host=anypoint.mulesoft.com [default: anypoint.mulesoft.com] Host URL. You can define this in the ANYPOINT_HOST
environment variable.
--organization= Organization Name. You can define this in the ANYPOINT_ORG environment variable.
--password= Password. You can define this in the ANYPOINT_PASSWORD environment variable.
--username= Username. You can define this in the ANYPOINT_USERNAME environment variable.

DESCRIPTION
Lists all Mule Runtimes
`

_See code: src/commands/cloudhub/runtime/list.ts_

anypoint-cli-cloudhub-plugin cloudhub:vpc:business-groups:add VPC BUSINESSGROUPS...

Share a VPC with a list of Business Groups.

`
USAGE
$ anypoint-cli-cloudhub-plugin cloudhub:vpc:business-groups:add [VPC] [BUSINESSGROUPS...] [--password [--username |
--client_id | ]] [--client_secret ] [--bearer | | ] [--organization ] [--environment
] [--host ] [--collectMetrics] [-h]

FLAGS
-h, --help Show CLI help.
--bearer= Token Bearer. You can define this in the ANYPOINT_BEARER environment variable.
--client_id= Client ID. You can define this in the ANYPOINT_CLIENT_ID environment variable.
--client_secret= Client Secret. You can define this in the ANYPOINT_CLIENT_SECRET environment variable.
--collectMetrics collect metrics. You can define this in the COLLECT_METRICS environment variable.
--environment= Environment Name. You can define this in the ANYPOINT_ENV environment variable.
--host=anypoint.mulesoft.com [default: anypoint.mulesoft.com] Host URL. You can define this in the ANYPOINT_HOST
environment variable.
--organization= Organization Name. You can define this in the ANYPOINT_ORG environment variable.
--password= Password. You can define this in the ANYPOINT_PASSWORD environment variable.
--username= Username. You can define this in the ANYPOINT_USERNAME environment variable.

DESCRIPTION
Share a VPC with a list of Business Groups.
`

_See code: src/commands/cloudhub/vpc/business-groups/add.ts_

anypoint-cli-cloudhub-plugin cloudhub:vpc:business-groups:remove VPC BUSINESSGROUPS...

Share a VPC with a list of Business Groups.

`
USAGE
$ anypoint-cli-cloudhub-plugin cloudhub:vpc:business-groups:remove [VPC] [BUSINESSGROUPS...] [--password [--username |
--client_id | ]] [--client_secret ] [--bearer | | ] [--organization ] [--environment
] [--host ] [--collectMetrics] [-h]

FLAGS
-h, --help Show CLI help.
--bearer= Token Bearer. You can define this in the ANYPOINT_BEARER environment variable.
--client_id= Client ID. You can define this in the ANYPOINT_CLIENT_ID environment variable.
--client_secret= Client Secret. You can define this in the ANYPOINT_CLIENT_SECRET environment variable.
--collectMetrics collect metrics. You can define this in the COLLECT_METRICS environment variable.
--environment= Environment Name. You can define this in the ANYPOINT_ENV environment variable.
--host=anypoint.mulesoft.com [default: anypoint.mulesoft.com] Host URL. You can define this in the ANYPOINT_HOST
environment variable.
--organization= Organization Name. You can define this in the ANYPOINT_ORG environment variable.
--password= Password. You can define this in the ANYPOINT_PASSWORD environment variable.
--username= Username. You can define this in the ANYPOINT_USERNAME environment variable.

DESCRIPTION
Share a VPC with a list of Business Groups.
`

_See code: src/commands/cloudhub/vpc/business-groups/remove.ts_

anypoint-cli-cloudhub-plugin cloudhub:vpc:create NAME REGION CIDRBLOCK [ENVIRONMENTS]

Create a new VPC

`
USAGE
$ anypoint-cli-cloudhub-plugin cloudhub:vpc:create [NAME] [REGION] [CIDRBLOCK] [ENVIRONMENTS] [--password
[--username | --client_id | ]] [--client_secret ] [--bearer | | ] [--organization
] [--environment ] [--host ] [--collectMetrics] [-h] [--default] [-o ]

FLAGS
-h, --help Show CLI help.
-o, --output= [default: table] Format for commands output. Supported values are table (default) and
json
--bearer= Token Bearer. You can define this in the ANYPOINT_BEARER environment variable.
--client_id= Client ID. You can define this in the ANYPOINT_CLIENT_ID environment variable.
--client_secret= Client Secret. You can define this in the ANYPOINT_CLIENT_SECRET environment variable.
--collectMetrics collect metrics. You can define this in the COLLECT_METRICS environment variable.
--default Makes the VPC the default for the Organization.
--environment= Environment Name. You can define this in the ANYPOINT_ENV environment variable.
--host=anypoint.mulesoft.com [default: anypoint.mulesoft.com] Host URL. You can define this in the ANYPOINT_HOST
environment variable.
--organization= Organization Name. You can define this in the ANYPOINT_ORG environment variable.
--password= Password. You can define this in the ANYPOINT_PASSWORD environment variable.
--username= Username. You can define this in the ANYPOINT_USERNAME environment variable.

DESCRIPTION
Create a new VPC
`

_See code: src/commands/cloudhub/vpc/create.ts_

anypoint-cli-cloudhub-plugin cloudhub:vpc:delete NAME

Delete an existing VPC

`
USAGE
$ anypoint-cli-cloudhub-plugin cloudhub:vpc:delete [NAME] [--password [--username | --client_id
| ]] [--client_secret ] [--bearer | | ] [--organization ] [--environment ] [--host
] [--collectMetrics] [-h] [-f]

FLAGS
-f, --force
-h, --help Show CLI help.
--bearer= Token Bearer. You can define this in the ANYPOINT_BEARER environment variable.
--client_id= Client ID. You can define this in the ANYPOINT_CLIENT_ID environment variable.
--client_secret= Client Secret. You can define this in the ANYPOINT_CLIENT_SECRET environment variable.
--collectMetrics collect metrics. You can define this in the COLLECT_METRICS environment variable.
--environment= Environment Name. You can define this in the ANYPOINT_ENV environment variable.
--host=anypoint.mulesoft.com [default: anypoint.mulesoft.com] Host URL. You can define this in the ANYPOINT_HOST
environment variable.
--organization= Organization Name. You can define this in the ANYPOINT_ORG environment variable.
--password= Password. You can define this in the ANYPOINT_PASSWORD environment variable.
--username= Username. You can define this in the ANYPOINT_USERNAME environment variable.

DESCRIPTION
Delete an existing VPC
`

_See code: src/commands/cloudhub/vpc/delete.ts_

anypoint-cli-cloudhub-plugin cloudhub:vpc:describe [NAME]

Show VPC details

`
USAGE
$ anypoint-cli-cloudhub-plugin cloudhub:vpc:describe [NAME] [--password [--username | --client_id
| ]] [--client_secret ] [--bearer | | ] [--organization ] [--environment ] [--host
] [--collectMetrics] [-h] [-o ]

FLAGS
-h, --help Show CLI help.
-o, --output= [default: table] Format for commands output. Supported values are table (default) and
json
--bearer= Token Bearer. You can define this in the ANYPOINT_BEARER environment variable.
--client_id= Client ID. You can define this in the ANYPOINT_CLIENT_ID environment variable.
--client_secret= Client Secret. You can define this in the ANYPOINT_CLIENT_SECRET environment variable.
--collectMetrics collect metrics. You can define this in the COLLECT_METRICS environment variable.
--environment= Environment Name. You can define this in the ANYPOINT_ENV environment variable.
--host=anypoint.mulesoft.com [default: anypoint.mulesoft.com] Host URL. You can define this in the ANYPOINT_HOST
environment variable.
--organization= Organization Name. You can define this in the ANYPOINT_ORG environment variable.
--password= Password. You can define this in the ANYPOINT_PASSWORD environment variable.
--username= Username. You can define this in the ANYPOINT_USERNAME environment variable.

DESCRIPTION
Show VPC details
`

_See code: src/commands/cloudhub/vpc/describe.ts_

anypoint-cli-cloudhub-plugin cloudhub:vpc:dns-servers:set NAME

Sets the domain names that are resolved using your internal DNS servers

`
USAGE
$ anypoint-cli-cloudhub-plugin cloudhub:vpc:dns-servers:set [NAME] --server --domain [--password
[--username | --client_id | ]] [--client_secret ] [--bearer | | ] [--organization
] [--environment ] [--host ] [--collectMetrics] [-h]

FLAGS
-h, --help Show CLI help.
--bearer= Token Bearer. You can define this in the ANYPOINT_BEARER environment variable.
--client_id= Client ID. You can define this in the ANYPOINT_CLIENT_ID environment variable.
--client_secret= Client Secret. You can define this in the ANYPOINT_CLIENT_SECRET environment variable.
--collectMetrics collect metrics. You can define this in the COLLECT_METRICS environment variable.
--domain= (required) A domain to resolve on the special DNS server list
--environment= Environment Name. You can define this in the ANYPOINT_ENV environment variable.
--host=anypoint.mulesoft.com [default: anypoint.mulesoft.com] Host URL. You can define this in the ANYPOINT_HOST
environment variable.
--organization= Organization Name. You can define this in the ANYPOINT_ORG environment variable.
--password= Password. You can define this in the ANYPOINT_PASSWORD environment variable.
--server= (required) IP for a DNS server to resolve special domains on
--username= Username. You can define this in the ANYPOINT_USERNAME environment variable.

DESCRIPTION
Sets the domain names that are resolved using your internal DNS servers
`

_See code: src/commands/cloudhub/vpc/dns-servers/set.ts_

anypoint-cli-cloudhub-plugin cloudhub:vpc:dns-servers:unset NAME

Clears the list domain names that are resolved using your internal DNS servers

`
USAGE
$ anypoint-cli-cloudhub-plugin cloudhub:vpc:dns-servers:unset [NAME] [--password [--username | --client_id
| ]] [--client_secret ] [--bearer | | ] [--organization ] [--environment ] [--host
] [--collectMetrics] [-h]

FLAGS
-h, --help Show CLI help.
--bearer= Token Bearer. You can define this in the ANYPOINT_BEARER environment variable.
--client_id= Client ID. You can define this in the ANYPOINT_CLIENT_ID environment variable.
--client_secret= Client Secret. You can define this in the ANYPOINT_CLIENT_SECRET environment variable.
--collectMetrics collect metrics. You can define this in the COLLECT_METRICS environment variable.
--environment= Environment Name. You can define this in the ANYPOINT_ENV environment variable.
--host=anypoint.mulesoft.com [default: anypoint.mulesoft.com] Host URL. You can define this in the ANYPOINT_HOST
environment variable.
--organization= Organization Name. You can define this in the ANYPOINT_ORG environment variable.
--password= Password. You can define this in the ANYPOINT_PASSWORD environment variable.
--username= Username. You can define this in the ANYPOINT_USERNAME environment variable.

DESCRIPTION
Clears the list domain names that are resolved using your internal DNS servers
`

_See code: src/commands/cloudhub/vpc/dns-servers/unset.ts_

anypoint-cli-cloudhub-plugin cloudhub:vpc:environments:add VPC ENVIRONMENTS...

Modifies the VPC association to Runtime Manager environments.

``
USAGE
$ anypoint-cli-cloudhub-plugin cloudhub:vpc:environments:add [VPC] [ENVIRONMENTS...] [--password [--username |
--client_id | ]] [--client_secret ] [--bearer | | ] [--organization ] [--environment
] [--host ] [--collectMetrics] [-h] [--default]

FLAGS
-h, --help Show CLI help.
--bearer= Token Bearer. You can define this in the ANYPOINT_BEARER environment variable.
--client_id= Client ID. You can define this in the ANYPOINT_CLIENT_ID environment variable.
--client_secret= Client Secret. You can define this in the ANYPOINT_CLIENT_SECRET environment variable.
--collectMetrics collect metrics. You can define this in the COLLECT_METRICS environment variable.
--default Also add the VPC as the organization default VPC
--environment=