Edge Impulse CLI tools

Command-line interface tools for Edge Impulse. We make things smarter by enabling developers to create the next generation of intelligent device solutions with embedded Machine Learning.

This package consists of four tools (click to see their respective documentation):

* edge-impulse-daemon - configures devices over serial, and acts as a proxy for devices that do not have an IP connection.
* edge-impulse-uploader - allows uploading and signing local files.
* edge-impulse-data-forwarder - a very easy way to collect data from any device over a serial connection, and forward the data to Edge Impulse.
* edge-impulse-run-impulse - show the impulse running on your device.
* edge-impulse-blocks - create organizational transformation blocks.
* eta-flash-tool - to flash the Eta Compute ECM3532 AI Sensor.
* himax-flash-tool - to flash the Himax WE-I Plus development board.

Installation

1. Install Node.js v16 or higher on your host computer.
2. Install the CLI tools via:

``$ npm install -g edge-impulse-cli`

Afterwards you should have the tools available in your PATH.

`Building from source`

If you're making changes to the CLI you can build from source.

1. Clone this repository:

`$ git clone https://github.com/edgeimpulse/edge-impulse-cli`

1. Install the dependencies:

`$ npm install`

1. Build and link the application:

`$ npm run build $ npm link`

`$3`

You can pass in options to the CLI. These options may vary between the various tools invoked. Here are the key ones:

* --clean- clear credentials, and re-authenticate. Use this to switch projects or devices. *--api-key - set an API key, useful for automatic authentication with a new project. *--greengrass- (Not used in serial daemon) utilize the AWS IoT Greengrass authentication context and AWS Secrets Manager to authenticate with a new project. Note below. *--help - see all options.

#### Greengrass command line option note

This option has no effect on the serial daemon process. If the option is provided to the serial daemon, it will be simply ignored.

`Debugging the serial daemon`

If you're adding support for a new development board, and you want to debug how the serial daemon implements serial protocol or what raw data the data forwarder sees, you can enable logging.

* For the data forwarder, uncomment: 1. * For the serial daemon, uncomment these lines 1, 2.

Then build from source.

`Troubleshooting`

`$3`

If you receive the following error: The tools version "2.0" is unrecognized. Available tools versions are "4.0", launch a new command window as administrator and run:

`$ npm install --global --production windows-build-tools $ npm config set msvs_version 2015 --global`

`$3`

This is indication that the node_modules is not owned by you, but rather by root. This is probably not what you want. To fix this, run:

`$ sudo chown -R $USER /usr/local/lib/node_modules``

Edge Impulse CLI tools

Command-line interface tools for Edge Impulse. We make things smarter by enabling developers to create the next generation of intelligent device solutions with embedded Machine Learning.

This package consists of four tools (click to see their respective documentation):

Installation

1. Install Node.js v16 or higher on your host computer.
2. Install the CLI tools via:

``$ npm install -g edge-impulse-cli`

Afterwards you should have the tools available in your PATH.

`Building from source`

If you're making changes to the CLI you can build from source.

1. Clone this repository:

`$ git clone https://github.com/edgeimpulse/edge-impulse-cli`

1. Install the dependencies:

`$ npm install`

1. Build and link the application:

`$ npm run build $ npm link`

`$3`

You can pass in options to the CLI. These options may vary between the various tools invoked. Here are the key ones:

#### Greengrass command line option note

This option has no effect on the serial daemon process. If the option is provided to the serial daemon, it will be simply ignored.

`Debugging the serial daemon`

If you're adding support for a new development board, and you want to debug how the serial daemon implements serial protocol or what raw data the data forwarder sees, you can enable logging.

* For the data forwarder, uncomment: 1. * For the serial daemon, uncomment these lines 1, 2.

Then build from source.

`Troubleshooting`

`$3`

If you receive the following error: The tools version "2.0" is unrecognized. Available tools versions are "4.0", launch a new command window as administrator and run:

`$ npm install --global --production windows-build-tools $ npm config set msvs_version 2015 --global`

`$3`

This is indication that the node_modules is not owned by you, but rather by root. This is probably not what you want. To fix this, run:

`$ sudo chown -R $USER /usr/local/lib/node_modules``