grunt-gh-pages

Publish to GitHub Pages with Grunt


Use Grunt to push to your gh-pages branch hosted on GitHub or any other branch anywhere else.

Getting Started

This plugin requires Grunt >=0.4.0 and Git >=1.7.6.

If you haven't used Grunt before, be sure to check out the Getting Started guide, as it explains how to create a gruntfile.js as well as install and use Grunt plugins. Once you're familiar with that process, you may install this plugin with this command:

``shell
npm install grunt-gh-pages --save-dev
`

Once the plugin has been installed, it may be enabled inside your gruntfile.js with this line:

`js
grunt.loadNpmTasks('grunt-gh-pages');
`

The gh-pages task

$3

In your project's Gruntfile, add a section named gh-pages to the data object passed into initConfig.

`js
grunt.initConfig({
'gh-pages': {
options: {
base: 'dist'
},
src: ['**']
}
});
`

Running this task with grunt gh-pages will create a temporary clone of the current repository, create a gh-pages branch if one doesn't already exist, copy over all files from the dist directory that match patterns from thesrc configuration, commit all changes, and push to the origin remote.

If a gh-pages branch already exists, it will be updated with all commits from the remote before adding any commits from the provided src files.

Note that any files in the gh-pages branch that are not in the src files will be removed. See the add option if you don't want any of the existing files removed.

The gh-pages task is a multi-task, so different targets can be configured with different src files and options. For example, to have the gh-pages:gh-pages target push to gh-pages and a second gh-pages:foo target push to a bar branch, the multi-task could be configured as follows:

`js
grunt.initConfig({
'gh-pages': {
options: {
// Options for all targets go here.
},
'gh-pages': {
options: {
base: 'build'
},
// These files will get pushed to the gh-pages branch (the default).
src: ['index.html']
},
'foo': {
options: {
base: 'bar-build',
branch: 'bar'
},
// These files will get pushed to the bar branch.
src: ['other.txt']
}
}
});
`

$3

The default task options work for simple cases. The options described below let you push to alternate branches, customize your commit messages, and more.

Options for all targets can be configured on the task level. Individual tasks can also have their own options that override task level options.

All options can be overriden with command line flags. The pattern to provide an option is like --gh-pages-optname foo where optname is the option name and foo is the option value. For example, to supply the tag and message, the task could be run as follows:

grunt gh-pages --gh-pages-tag 'v1.2.3' --gh-pages-message 'Tagging v1.2.3'

#### options.base

* type: string
* default: process.cwd()

The base directory for all source files (those listed in the src config property). By default, source files are assumed to be relative to the current working directory, and they will be copied to the target with this relative path. If your source files are all in a different directory (say, build), and you want them to be copied with a path relative to that directory, provide the directory path in the base option (e.g. base: 'build').

Example use of the base option:

`js
/**
* Given the following directory structure:
*
* build/
* index.html
* js/
* site.js
*
* The task below will create a gh-pages branch that looks like this:
*
* index.html
* js/
* site.js
*
*/
grunt.initConfig({
'gh-pages': {
options: {
base: 'build'
},
src: '*/'
}
});
`

#### options.dotfiles

* type: boolean
* default: false

Include dotfiles. By default, files starting with . are ignored unless they are explicitly provided in the src array. If you want to also include dotfiles that otherwise match your src patterns, set dotfiles: true in your options.

Example use of the dotfiles option:

`js
/**
* The task below will push dotfiles (directories and files)
* that otherwise match the src pattern.
*/
grunt.initConfig({
'gh-pages': {
options: {
base: 'dist',
dotfiles: true
},
src: '*/'
}
});
`

#### options.add

* type: boolean
* default: false

Only add, and never remove existing files. By default, existing files in the target branch are removed before adding the ones from your src config. If you want the task to add new src files but leave existing ones untouched, set add: true in your target options.

Example use of the add option:

`js
/**
* The task below will only add files to the gh-pages branch, never removing
* any existing files (even if they don't exist in the src config).
*/
grunt.initConfig({
'gh-pages': {
options: {
base: 'build',
add: true
},
src: '*/'
}
});
`

#### options.only

* type: string or array of strings
* default: '.'

When options.add is false, you may specify a filter to select the files to remove, instead of removing all files.

Example of the only option:

`js
/**
* The task below will only remove the index.html and .js files from the
* gh-pages branch before copying over files from the src.
*/
grunt.initConfig({
'gh-pages': {
options: {
base: 'build',
only: ['index.html', '*/.js']
},
src: '*/'
}
});

/**
* The task below will only remove all files except the README.md from the
* gh-pages branch before copying over files from the src.
*/
grunt.initConfig({
'gh-pages': {
options: {
base: 'build',
only: ['*/', '!README.md']
},
src: '*/'
}
});
`

#### options.repo

* type: string
* default: url for the origin remote of the current dir (assumes a git repository)

By default, the gh-pages task assumes that the current working directory is a git repository, and that you want to push changes to the origin remote. This is the most common case - your gruntfile.js builds static resources and the gh-pages task pushes them to a remote.

If instead your gruntfile.js is not in a git repository, or if you want to push to another repository, you can provide the repository URL in the repo option.

Example use of the repo option:

`js
/**
* If the current directory is not a clone of the repository you want to work
* with, set the URL for the repository in the repo option. This task will
* push all files in the src config to the gh-pages branch of the repo.
*/
grunt.initConfig({
'gh-pages': {
options: {
base: 'build',
repo: 'https://example.com/other/repo.git'
},
src: '*/'
}
});
`


#### options.branch

* type: string
* default: 'gh-pages'

The name of the branch you'll be pushing to. The default uses GitHub's gh-pages branch, but this same task can be used to push to any branch on any remote.

Example use of the branch option:

`js
/**
* This task pushes to the master branch of the configured repo.
*/
grunt.initConfig({
'gh-pages': {
options: {
base: 'build',
branch: 'master',
repo: 'https://example.com/other/repo.git'
},
src: '*/'
}
});
`


#### options.tag

* type: string
* default: ''

Create a tag after committing changes on the target branch. By default, no tag is created. To create a tag, provide the tag name as the option value.

Example use of the tag option from the command line:

`shell
grunt gh-pages --gh-pages-tag 'v3.2.1'
`

#### options.message

* type: string
* default: 'Updates'

The commit message for all commits.

Example use of the message option:

`js
/**
* This adds commits with a custom message.
*/
grunt.initConfig({
'gh-pages': {
options: {
base: 'build',
message: 'Auto-generated commit'
},
src: '*/'
}
});
`

Alternatively, this option can be set on the command line:

`shell
grunt gh-pages --gh-pages-message 'Making commits'
`


#### options.user

* type: Object
* default: null

If you are running the gh-pages task in a repository without a user.name or user.email git config properties (or on a machine without these global config properties), you must provide user info before git allows you to commit. The options.user object accepts name and email string values to identify the committer.

Example use of the user option:

`js
grunt.initConfig({
'gh-pages': {
options: {
base: 'build',
user: {
name: 'Joe Code',
email: 'coder@example.com'
}
},
src: '*/'
}
});
`

#### options.clone

* type: string
* default: '.grunt/grunt-gh-pages/gh-pages/repo'

Path to a directory where your repository will be cloned. If this directory doesn't already exist, it will be created. If it already exists, it is assumed to be a clone of your repository. If you stick with the default value (recommended), you will likely want to add .grunt to your .gitignore file.

Example use of the clone option:

`js
/**
* If you already have a temp directory, and want the repository cloned there,
* use the clone option as below. To avoid re-cloning every time the task is
* run, this should be a directory that sticks around for a while.
*/
grunt.initConfig({
'gh-pages': {
options: {
base: 'build',
clone: 'path/to/tmp/dir'
},
src: '*/'
}
});
`


#### options.push

* type: boolean
* default: true

Push branch to remote. To commit only (with no push) set to false.

Example use of the push option:

`js
grunt.initConfig({
'gh-pages': {
options: {
base: 'build',
push: false
},
src: '*/'
}
});
`

#### options.silent

* type: boolean
* default: false

Suppress logging. This option should be used if the repository URL or other information passed to git commands is sensitive and should not be logged. With silent true log messages are suppressed and error messages are sanitized.

Example use of the silent option:

`js
/**
* This configuration will suppress logging and sanitize error messages.
*/
grunt.initConfig({
'gh-pages': {
options: {
base: 'build',
repo: 'https://' + process.env.GH_TOKEN + '@github.com/user/private-repo.git',
silent: true
},
src: '*/'
}
});
`


#### options.git

* type: string
* default: 'git'

Your git executable.

Example use of the git option:

`js
/**
* If git is not on your path, provide the path as shown below.
*/
grunt.initConfig({
'gh-pages': {
options: {
base: 'build',
git: '/path/to/git'
},
src: '*/'
}
});
`

Dependencies

Note that this plugin requires Git 1.7.6 or higher (because it uses the --exit-code option for git ls-remote`). If you'd like to see this working with earlier versions of Git, please open an issue.