npm install grunt-sshNew owner! Starting 12-23-2015, I (@israelroldan) am standing on the shoulders of two giants (@chuckmo and @andrewrjones) as maintainer of this project. Contributions are welcome as always.
(This message will be removed on next release as well).
!Dependencies
> SSH and SFTP tasks for Grunt, using a pure JS implementation of ssh2.
This plugin requires Grunt ~0.4.0
If you haven't used Grunt before, be sure to check out the Getting Started guide, as it explains how to create a Gruntfile as well as install and use Grunt plugins. Once you're familiar with that process, you may install this plugin with this command:
``shell`
npm install grunt-ssh --save-dev
Once the plugin has been installed, it may be enabled inside your Gruntfile with this line of JavaScript:
`js`
grunt.loadNpmTasks('grunt-ssh');
This library provides two Grunt tasks for ssh:
* _sftp_
* _sshexec_
This plugin was designed to work with Grunt 0.4.x. If you're still using grunt v0.3.x it's strongly recommended that you upgrade, but in case you can't please use v0.1.0.
`js`
// don't keep passwords in source control
secret: grunt.file.readJSON('secret.json'),
sftp: {
test: {
files: {
"./": "*json"
},
options: {
path: '/tmp/',
host: '<%= secret.host %>',
username: '<%= secret.username %>',
password: '<%= secret.password %>',
showProgress: true
}
}
},
sshexec: {
test: {
command: 'uptime',
options: {
host: '<%= secret.host %>',
username: '<%= secret.username %>',
password: '<%= secret.password %>'
}
}
}
An example secret.json might look like:
`js`
{
"host" : "myhost",
"username" : "username",
"password" : "**"
}
Or, specifying SSH configurations for re-use, and referencing from tasks:
`js`
// don't keep passwords in source control
sshconfig: {
"myhost": grunt.file.readJSON('myhost.json')
},
sshexec: {
test: {
command: 'uptime',
options: {
config: 'myhost'
}
},
ls: {
command: 'ls -la',
options: {
config: 'myhost'
}
}
}
You can also overwrite the username, password, passphrase or config at runtime as a command line option:
`sh`
$ grunt sshexec:someTask --config myhost --username foo
Copies one or more files to a remote server over ssh.
Inside your grunt.js file add a section named sftp.
#### Parameters
##### files `object`
The files to copy. Should contain key:value pairs.
If you would like to upload multiple files, use an array. For example:
`js`
files: {
"./": ["<%= dirs.css %>style.css","<%= dirs.css %>login.css","<%= dirs.css %>print.css"]
},
The following will __not__ work:
`js`
files: {
"./": "<%= dirs.css %>style.css",
"./": "<%= dirs.css %>login.css",
"./": "<%= dirs.css %>print.css"
},
##### options `object`
###### path `string`
The path on the remote server. Defaults to /.
###### minimatch `object`
Options for minimatch.
###### username `string`
The username to authenticate as on remote system.
###### host `string`
The remote host to copy to, set up in your ~/.ssh/config.
###### port `number`
The remote port, optional, defaults to 22.
###### srcBasePath `string`
Optionally strip off an initial part of the file when performing the SFTP operation. This is a string operation, so trailing slashes are important.
For example:
`js`
/ [...] /
files: {
"./": "dist/**"
},
options: {
path: '/tmp/',
/ [...] /
srcBasePath: "dist/"
Would SFTP the files in dist directly into tmp (eg. `dist/index.html` ==> `/tmp/index.html`)
###### createDirectories `boolean`
Optionally check whether the directories files will be sftp'd to exist first. This can take a bit of extra time as directories need to be checked, so this option is disabled by default.
See also the `directoryPermissions` option.
###### directoryPermissions `number`
The permissions to apply to directories created with createDirectories. The default is 0755. JSHint will probably yell at you unless you set this using `parseInt`:
`js`
directoryPermissions: parseInt(755, 8)
###### showProgress `boolean`
Show a progress bar during the file transfer. The default is `false`.
###### chunkSize `integer`
Size of each read in bytes (default: 32768)
###### callback `function`
Callback function called after command execution. Default: `empty function`
##### Connection options
There are three mutually exclusive sets of connection options. They are
privateKey (with optional passphrase), password, and agent. If any of
these options are private, they will be tried exclusively, and other connection
options will be ignored. Each is described a bit more below.
###### privateKey `string`
A string containing the contents of the private key to use to authenticate with the remote system, you can load this from a file using `grunt.file.read`. Be careful you don't put this into source control unless you mean it!
If a privateKey and passphrase are required, they
`js`
options: {
privateKey: grunt.file.read("id_rsa"),
passphrase: <%= secret.passphrase %>
}
###### passphrase `string`
The passphrase to use with the `privateKey`. As per the `privateKey`, do not expose this in your Gruntfile or anywhere that'll end up public unless you mean it, load it from an external file.
###### password `string`
The password to authenticate on remote system.
###### agent `string`
Path to ssh-agent's UNIX socket for ssh-agent-based user authentication.
`js`
options: {
host: '<%= pkg.host %>',
port: '<%= pkg.port %>',
username: '<%= pkg.username %>',
agent: process.env.SSH_AUTH_SOCK
}
If you use jshint`, remember to add `process: true` in `globals`
###### readyTimeout `integer`
How often (in milliseconds) to wait for the SSH handshake to complete.
Runs a command over ssh.
__NOTE:__ To see the output of your sshexec command locally, use the --verbose flag.
Inside your grunt.js file add a section named sshexec.
#### Parameters
##### command `string` or `array`
The command or commands to run, if an array is supplied, all the commands are executed on the same connection.
##### options `object`
###### username `string`
The username to authenticate as on remote system.
###### host `string`
The remote host to copy to, set up in your ~/.ssh/config.
###### port `number`
The remote port, optional, defaults to 22.
###### pty `boolean/object`
Set to true to allocate a pseudo-tty with defaults, or an object containing specific pseudo-tty settings (see 'Pseudo-TTY settings'). Setting up a pseudo-tty can be useful when working with remote processes that expect input from an actual terminal (e.g. sudo's password prompt).
###### ignoreErrors `boolean`
Determins if the task should stop or continue if any of the commands returns a code other than 0. Disabled by default.
###### suppressRemoteErrors `boolean`
If true only display remote error messages if Grunt is run with the --verbose flag.
##### Connection options
There are three mutually exclusive sets of connection options. They are
privateKey (with optional passphrase), password, and agent. If any of
these options are private, they will be tried exclusively, and other connection
options will be ignored. Each is described a bit more below.
###### privateKey `string`
A string containing the contents of the private key to use to authenticate with the remote system, you can load this from a file using `grunt.file.read`. Be careful you don't put this into source control unless you mean it!
`js`
options: {
privateKey: grunt.file.read("id_rsa"),
passphrase: <%= secret.passphrase %>
}
###### passphrase string`
The passphrase to use with the `privateKey`. As per the `privateKey`, do not expose this in your Gruntfile or anywhere that'll end up public unless you mean it, load it from an external file.
###### password `string`
The password to authenticate on remote system.
###### agent `string`
Path to ssh-agent's UNIX socket for ssh-agent-based user authentication.
`js`
options: {
host: '<%= pkg.host %>',
port: '<%= pkg.port %>',
username: '<%= pkg.username %>',
agent: process.env.SSH_AUTH_SOCK
}
If you use `jshint`, remember to add `process: true` in `globals`
###### readyTimeout `integer`
How often (in milliseconds) to wait for the SSH handshake to complete.
sshexec runs each command individually, and it does not keep state of the previous command, so when you need to perform 2 commands or more , you could do e.g.:
`js`
sshexec: {
test: {
command: ['sh -c "cd /; ls; pwd"'],
options: {
host: '<%= secret.host %>',
username: '<%= secret.username %>',
password: '<%= secret.password %>'
}
}
}
* Grunt your deployments too - toptable Tech Blog
* Grunt Deployment over SSH with Git - Justin Klemm
improvements (Brian White; #64: Changed error handling for SFTP junglebarry
* 2014/03/21 - v0.11.1 - #59: Don't add '/' to empty path (David J. Bradshaw).
* 2014/03/15 - v0.11.0 - #50: Enable setting of chunkSize option (Michael Lam); #51: Fix bad output on close (Eric Kever); #56: Add readyTimeout option for ssh2 connections (calebTomlinson).
* 2014/01/16 - v0.10.0 - #47: Add an optional progress bar for sftp uploads (Jason Williams).
* 2013/12/06 - v0.9.1 - #44: Improve doc for SSH connection options (Mark Stosberg); #45: Fix incorrect Connection parameter in execCommand (jabes).
* 2013/12/06 - v0.9.0 - #28: Pseudo-TTY support; #40: Add trailing slash to path if needed; #31: Print debug messages from ssh2 when --debug option is passed; Use latest version of ssh2 (0.2.14).
* 2013/11/17 - v0.8.0 - #33: File counter for sftp and suppressRemoteErrors option for sshexec (David J. Bradshaw); #34: Use stat() instead of opendir() for checking existence of a dir (Harri Hälikkä); #38: Doc updates (Alexandre Richonnier).
* 2013/10/17 - v0.7.0 - #32: Added command line options for username, password and passphrase (David J. Bradshaw); Doc updates.
* 2013/09/25 - v0.6.2 - Allow sftp task to use the shared sshconfig; Allow overriding sshconfig properties in the task config (Andy Royle). Document using the private key with sshexec.
* 2013/07/25 - v0.6.2 - Fix error when no passphrase is provided (James Wyse).
* 2013/07/21 - v0.6.1 - trim options that may be read from files; Allow sshexec to use ssh-agent-based user authentication (Andy Shinn).
* 2013/06/26 - v0.6.0 - Ability to supply a path to ssh-agent's UNIX socket for ssh-agent-based user authentication (Justin Kulesza).
* 2013/06/25 - v0.5.1 - Fix srcBasePath (owenmead).
* 2013/06/02 - v0.5.0 - Add support for multiple comands (Andrew Stewart).
* 2013/05/11 - v0.4.0 - Support defining and referencing ssh configurations. (Anders Johnson).
* 2013/05/07 - v0.3.3 - Fix encoding issues. (John Wright).
* 2013/05/07 - v0.3.2 - Fix race condition when uploading larger files. (John Wright).
* 2013/03/25 - v0.3.1 - Fix race condition when uploading multiple files. (John Wright).
* 2013/02/27 - v0.3.0 - Support private key based authentication; Allow sftp to make directories if they do not exist. (marcins).
* 2013/02/26 - v0.2.1 - Add srcBasePath option to sftp` (marcins).