homebridge-nibe
v2.1.2TypeScript
Homebridge plugin for Nibe services
0/weekUpdated 1 years agoMITUnpacked: 829.5 KB
Published by Hubert Pruszynski
npm install homebridge-nibe
homebridge-nibe
!Release
Nibe myUplink plugin for homebridge
This Homebridge plugin retrieves data from a Nibe heat pump using Nibe myUplink.
⚠️ Notice: Version 2 of this plugin supports only myUplink! To access data from Nibe Uplink, please use version 1 of the plugin. The old API is no longer compatible with this plugin.
$3
Complete setup instructions are available on the plugin configuration page in Homebridge, providing a step-by-step guide to obtaining the required parameters.
$3
| Accessory | Description |
|---|---|
| outdoor-temperature | BT1 outdoor temperature (40004 or 44362). |
| average-outdoor-temperature | BT1 average outdoor temperature (40067). |
| hot-water | Thermostat for hot water (40014, 40008). The switch within the thermostat controls temporary lux (48132), which requires a Nibe premium subscription. Changing temporary lux through the Nibe API takes some time (20-30 seconds), so any switch adjustments won’t be immediately reflected in Nibe. |
| hot-water-top | Top hot water temperature (40013). |
| ventilation-exhaust-air | Ventilation/ERS exhaust air temperature (40025). |
| ventilation-extract-air | Ventilation/ERS extract air temperature (40026). |
| ventilation-supply-air | ERS supply air temperature (40075). |
| ventilation-outdoor | ERS outdoor temperature (40183). |
| ers-fan (Soon) | ERS fan speed (40311, 40312) with change rotation speed (47260) and active state when rotation is grater than 0. |
| ventilation-fan (Soon) | Ventilation fan speed (10001) with change rotation speed (47260) and active state when rotation is grater than 0. |
| thermostat (Soon) | Thermostat (40008,43437) for heating and cooling (if available). Active state is calculated. Changing desired temperature will affect heating/cooling offset (47011/48739). |
| new-firmware | An occupancy sensor that will be triggered when a new firmware version becomes available. |
Roadmap
Check the project roadmap at https://github.com/hp-net/homebridge-nibe/projects/1
Configuration
Configuration can be done via the Homebridge UI, which is the recommended method.
However, you can also make changes directly in the Homebridge config.json file. Below is a description of all options:
| Name | Required | Default | Description |
|---|---|---|---|
| platform | Yes | Nibe | 'Nibe' is only correct value. If value will be different configuration will not match plugin. |
| identifier | Yes | Api client identifier from Nibe myUplink account. Follow plugin configuration instructions to obtain it. | |
| secret | Yes | Api client secret from Nibe myUplink account. Follow plugin configuration instructions to obtain it. | |
| language | No | en | Language for accessory labels. Possible values: 'en', 'pl', 'sv'. |
| pollingPeriod | No | 60 | Period (in seconds) for fetching device updates from api. |
| disabledAccessories | No | List of accessories to disable. Format 'id'. | |
| showApiResponse | No | If set to true response from Nibe myUplink API will be displayed in logs. |
Sponsorship & support
If you are using this project please consider sponsoring it's further development & bug fixes
