Homebridge SwitchBot BLE Plugin

homebridge-switchbot-ble




Homebridge plugin for SwitchBot devices using direct BLE (Bluetooth Low Energy) connections. Control your SwitchBot devices directly through HomeKit without requiring the SwitchBot Hub or cloud connection.

Features

- You can also integrate this repo with the MCP server. See the repository: SwitchBot-MCP-Integration
- Direct BLE Control: No SwitchBot Hub or internet connection required
- Fast Response: Direct Bluetooth connection means faster response times
- Multiple Modes: Supports both switch (on/off) and press (momentary) modes
- Child Bridge Support: Improved stability with isolated process
- Auto-off Function: Automatically turns off after configurable delay
- Detailed Logging: Debug mode for troubleshooting
- Multiple Device Support: Control multiple SwitchBot devices simultaneously
- New! Automatic Status Check: Periodically check and update device status
- New! Mode Verification: Automatically prevents ON/OFF commands on devices in Press mode

!image

Requirements

- Raspberry Pi, Mac, or Linux system with Bluetooth support
- Node.js v18 or later
- Homebridge v1.3.5 or later
- Bluetooth 4.0+ adapter with BLE support

Installation

$3

1. Open your Homebridge UI
2. Go to the "Plugins" tab
3. Search for "homebridge-switchbot-ble"
4. Click "Install"

$3

``bash
npm install -g homebridge-switchbot-ble
`

$3

1. Copy the downloaded homebridge-switchbot-ble folder to the same path as the homebridge-XXX.

2. enter the homebridge-switchbot-ble folder and do
`bash
npm install
`

Configuration

You can use this plugin in two modes:

$3

Add this to the platforms section of your Homebridge config.json:

`json
"platforms": [
{
"platform": "SwitchbotBLE",
"name": "SwitchBot",
"devices": [
{
"name": "Living Room Light",
"deviceId": "xx:xx:xx:xx:xx:xx",
"mode": "switch",
"debug": true,
"autoOff": false,
"enableStatusCheck": true,
"statusCheckInterval": 60
},
{
"name": "Bedroom Light",
"deviceId": "yy:yy:yy:yy:yy:yy",
"mode": "switch",
"autoOff": true,
"autoOffDelay": 2,
"enableStatusCheck": true,
"statusCheckInterval": 120
}
],
"_bridge": {
"username": "0E:22:5D:E0:FE:F1",
"port": 41087
}
}
]
`

$3

Add this to the accessories section of your Homebridge config.json:

`json
"accessories": [
{
"accessory": "SwitchbotBLE",
"name": "Living Room Light",
"deviceId": "xx:xx:xx:xx:xx:xx",
"mode": "switch",
"debug": true,
"enableStatusCheck": true,
"statusCheckInterval": 60
}
]
`

Configuration Options

| Parameter | Type | Default | Description |
|-----------------------|---------|---------------------|----------------------------------------------------------|
| name | String | "SwitchBot" | Name of the accessory in HomeKit |
| deviceId | String | - | MAC address of the SwitchBot device (required) |
| mode | String | "switch" | "switch" for ON/OFF control, "press" for momentary press |
| autoOff | Boolean | false | Automatically turn off after delay |
| autoOffDelay | Number | 1 | Delay in seconds before auto-off |
| debug | Boolean | false | Enable detailed logging |
| configPath | String | ~/.switchbot.config | Path to store device configuration |
| enableStatusCheck | Boolean | false | Enable periodic device status checks |
| statusCheckInterval | Number | 60 | Interval in seconds between status checks |

Finding Your SwitchBot's MAC Address

You can find your SwitchBot's MAC address using the built-in scan function:

`bash
cd ~/.homebridge
npx homebridge-switchbot-ble scan
`

Or run the following command:

`bash
node node_modules/homebridge-switchbot-ble/bot-cmd.mjs scan
`

This will scan for nearby SwitchBot devices and display their MAC addresses.

Operational Modes

$3

In switch mode, the device maintains its ON/OFF state like a regular switch. This works best for:
- Light switches that should stay ON or OFF
- Devices that need to be in a specific state

$3

In press mode, the device performs a momentary press regardless of the state change. This is for:
- Doorbell buttons
- Momentary switches
- Devices that should only receive a trigger, not maintain state

$3

The plugin now automatically verifies device mode before executing commands:

- ON/OFF Commands in Press Mode: If your device is in Press mode, the plugin will now detect this and prevent ON/OFF commands from being sent, as these are incompatible with Press mode.
- Retry Logic: The system will retry checking device mode several times before giving up, in case the device was temporarily unavailable.
- Clear Error Messages: When an incompatible command is attempted, clear error messages are logged explaining why the command was not executed.
- Command Safety: This prevents inappropriate commands from being sent to your device, improving reliability.

This feature works in both the API layer and the command-line tool, ensuring consistent behavior across all interfaces.

Automatic Status Check

The new status check feature periodically polls your SwitchBot device to:

1. Verify Actual State: Detect if the device has been physically operated or controlled by another app
2. Update HomeKit: Automatically update the HomeKit state to match the device's actual state
3. Monitor Battery: Track battery levels for compatible devices
4. Improve Reliability: Ensure the virtual and physical states stay in sync

To enable status checking, set:
`json
"enableStatusCheck": true,
"statusCheckInterval": 60
`

The statusCheckInterval is in seconds. Recommended values:
- 30-60 seconds for frequently used devices
- 120-300 seconds for less frequently used devices
- Lower values provide more responsive updates but increase Bluetooth traffic

Child Bridge Support

For best performance, use the platform version with Child Bridge. This provides:

1. Better Stability: Isolated process for Bluetooth operations
2. Reduced Interference: Separates BLE operations from other plugins
3. Independent Restart: Can restart without affecting other accessories

To enable Child Bridge, use the platform configuration with the _bridge parameter.

See the Child Bridge Guide for detailed setup instructions.

Troubleshooting

$3

1. Make sure your device is within Bluetooth range (usually 10-15 meters)
2. Verify the device ID (MAC address) is correct
3. Check that Bluetooth is enabled on your Homebridge server
4. Try restarting Homebridge using the included script

$3

Enable debug mode by setting "debug": true in your device configuration. This will:
- Log all BLE commands and responses
- Create detailed logs for troubleshooting
- Show connection and command execution details

$3

| Problem | Solution |
|----------------------------|--------------------------------------------------------------|
| Device not found | Verify MAC address and ensure device is in range |
| Commands timeout | Move Homebridge server closer to the device |
| Child Bridge not working | See the Child Bridge Guide |
| Slow response | Check for Bluetooth interference or try Child Bridge mode |
| Status not updating | Increase debug and check logs for connection issues |
| JSON parse errors | Try restarting the plugin or check device compatibility |
| "Cannot turn ON/OFF" error | Check if your device is in Press mode instead of Switch mode |
| Mode mismatch | Use "press" command for devices in Press mode, not ON/OFF |

$3

If you see errors like "Cannot turn on device: Device is in Press mode, not Switch mode", this is expected behavior with the new mode verification feature. The plugin is protecting your device from receiving incompatible commands.

To resolve:
1. Check your device's physical mode switch (if available)
2. Update your device configuration to match the actual mode ("press" or "switch")
3. If you want to toggle a device in Press mode, use the "press" command instead of ON/OFF

$3

Run the included restart-homebridge.bat script (Windows) or restart Homebridge with the -U flag to clear the accessory cache:

`bash
homebridge -U /your/homebridge/path -I
`

Advanced Features

$3

The plugin now features enhanced retry logic with several improvements:

- Consistent Timeouts: All retry operations now use a consistent 3-second timeout, matching the default scan duration
- Mode Checking: Each retry attempt includes a device mode verification to ensure compatibility
- Intelligent Retries: The system distinguishes between temporary Bluetooth failures and permanent issues
- Better Error Messages: More detailed error messages help troubleshoot connection issues
- Optimized Battery Usage: Proper timeout handling reduces unnecessary Bluetooth operations

These improvements make the plugin more reliable, especially in environments with occasional Bluetooth interference or when devices are at the edge of the connection range.

Logs and Debugging

This plugin creates detailed logs for troubleshooting in the logs directory. All log timestamps are now recorded in your system's local time format, matching your region's date and time display preferences. When reporting an issue, please include these logs to help diagnose the problem.

Contributing

Contributions are welcome! Feel free to open issues or pull requests.

1. Fork the repository
2. Create a feature branch (git checkout -b feature/amazing-feature)
3. Commit your changes (git commit -m 'Add some amazing feature')
4. Push to the branch (git push origin feature/amazing-feature`)
5. Open a Pull Request

License

This project is licensed under the MIT License - see the LICENSE file for details.

Additional Resources

- Homebridge Website
- SwitchBot Developer Page
- Node-SwitchBot Library
- Model Context Protocol