npm install iobroker.ring!Logo
!Number of Installations !Number of Installations 
The Ring adapter works with Ring devices like the Ring Video Doorbell and Ring Cam and shows if someone rings the
doorbell or if motion is detected.
The Ring Video Doorbell or Cam sends a videostream if a motion or doorbell is detected.
After installing the Adapter, you have to enter your Token.
Ring now requires the use of Two-Factor Authentication (2fa) for all accounts.
For getting the token, please do following on your shell.
``shell`
npx -p ring-client-api ring-auth-cli
or
`Unix
cd /opt/iobroker/node_modules/iobroker.ring/
npm i ring-client-api
cd /opt/iobroker/node_modules/iobroker.ring/node_modules/ring-client-api
node ring-auth-cli
`
You can use special variables for your livestream and snapshot path and filename. These variables will be replaced with
a counter, timestamp, ring id or kind of ring.
* %d: Unix timestamp. Example: test_%d -> test_1588331430061
* : Formatted dated YYYYMMDD. Example: test_%g -> test_20240614
* : Formatted time HHiiss. Example: test_%t -> test_235901
* : ID of your ring device: Example: test_%i -> test_234567890
* : Counter since ring instance start. Example: test_%n -> test_1
* : Kind of your ring device: Example: test_%k -> test_doorbell
#### I don't receive events, snapshots and videos on motion or detected person
Congrats, it's very likely that your current token was put on a blacklist by ring, denying you the push notification you
would need.
The best way to resolve this is to remove any previous browsers/adapter tokens on the ring website and generate a new
token for the adapter.
In order for this adapter to properly react on events, Ring must send the push notification to the
used Ring Api Client for this adapter to react on it. The logic in this adapter was
checked multiple times and works for plenty of users, so if you experience issues regarding missing events, it's
unlikely
the fault of this adapter.
1. Some datapoints got renamed to be more consistent (e.g. livestream_request got reduced to request as it alreadylivestream
is in channel ).
2. You can now configure wether you want to react on events (with recording, snapshot, ...) or not.
3. Binary states got removed.
1. The Device Names got extended by their description (e.g., from Device 1234567
to )ring-api
2. Snapshot/Livestream Data is now in a respective channel, containing the other data points.
3. The snapshot/livestream object got changed from type meta to state with type file.
4. Events (Motion, Ding, etc.) are now in the respective channel.
5. Due to dropping the support for node before v16.x this adapter needs node v16.x or node v18.x
6. Active refreshes are reduced to once every 2 hours, as we are listening/reacting to events.
You can use the SIP Information for a SIP Video Conference with your SIP client.
The adapter will not provide all ring devices because the used API does not include all ring devices.
You can use, for example, the Blink SIP client on http://icanblink.com/.
To get video working go into Blink's Preferences and under "Accounts", switch the tab to "Media" and deselect "Encrypt
audio and video" under "RTP Options".
Be careful, the SIP information expires after a few seconds!
Hopefully I will be able to support a video stream soon.
Unfortunately, ring.com does not have an official API that support this feature.
If you press the livestream request button you get new SIP Information for building up a SIP Video Call session.
If you are using the ring.com cloud, you find under history a http link to your last motion /
doorbell recorded video.
* (theimo1221) #820 Support Node-JS 22
* (theimo1221) #768 Add df_doorbell_clownfish
* (theimo1221) #738 Add stickup_cam_medusa
* (theimo1221) #685 Add cocoa_doorbell_v3
* (simatec) Settings for responsive Design
* (theimo1221) Update some developer packages
* (theimo1221) Fix License-Info object in io-package.json
* (theimo1221) Update iobroker test package
* (theimo1221) Update some test packages regarding mocha
* (theimo1221) Update pipelines to stop using node 18.x
* (theimo1221) #746 Fix license information in io-package.json
* (theimo1221) #746 Add tier in io-package.json
* (theimo1221) #746 Remove deprecated property 'materializeTab' in io-package.json
* (theimo1221) #746 Remove deprecated property 'main' in io-package.json
* (theimo1221) #746 Bump minimum js-controller in io-package.json
* (theimo1221) #746 Remove specific version reference to camera utils
* (theimo1221) #746 Add @alcalzone/release-script-plugin-manual-review
* (Speedbreaker12) js-controller7 compatibility #707
* (Speedbreaker12) Added siren trigger functionality to cameras
* (Speedbreaker12) Add battery status support for Ring Intercom
* (theimo1221) Some minor package updates
* (theimo1221) Some package updates
* (theimo1221) #749 Bump minimal Node Version to 20
* (crocri) Multiple fixes
* (theimo1221) Update Ring-Api to V13
* (SFGJK) #710 Enhancement of filename placeholder feature
* (theimo1221) Updated Packages
* (theimo1221) #614 Enforce @homebridge/camera-utils version 2.2.4
* (crocri) Code cleanup
* (theimo1221) #614 Add @homebridge/camera-utils as direct depency to mitigate import issue
* (theimo1221) Updated Packages
* (theimo1221) Include missing build artifacts
* (theimo1221) Updated Packages
* (crocri) Make event debouncing configurable
* (theimo1221) #602 Debounce Motion Events by 25 seconds. This prevents multiple events within a short time.
* (theimo1221) #603 Add rxjs to normal dependencies instead of dev-dependencies
* (theimo1221) #603 Change rxjs import to resolve awkward js build result.
* (theimo1221) Remove mixup of callback and async within same function
* (theimo1221) #603 Harden usage of "firstValueFrom"
* (theimo1221) Updated Packages
* (theimo1221) Remove legacy states
* (theimo1221) Add stickup_cam_mini_v2
* (bluefox) migrated the configuration to JSON
* (crocri) many changes for livestream and high-definition screenshots
* (theimo1221) Refactoring and cleanup
* (crocri) Ding event is now working again for Ring-Intercom
* (crocri) auto livestream creation takes now value from config, before fix
* (crocri) snapshot now async, because snapshot and livestream in parallel do not work
* (crocri) livestream duration now settable via tree entry will be auto reset via livestream request.
* (crocri) two new config entries auto_livestream and auto_snapshot to disable auto creation of livestream and snapshot.
* (crocri) some minor corrections to code
* (crocri) Removed binary States
* (crocri) Improvements for vis compatibility done
* (theimo1221) Refactoring and cleanup
* (theimo1221) !!Breaking Change!! From now on Node 18 or 20 is required, Node 16 is not supported anymore
* (theimo1221) Updated Ring-Api to v12 which needs Node 18 or 20
* (theimo1221) Updated Packages
* (theimo1221) Compliance to adapter-checker
* (theimo1221) Updated Packages
* (theimo1221) Debounce Doorbell Presses
* (theimo1221) Added Support for cocoa_doorbell_v2
* (theimo1221) Added Support for stickup_cam_longfin
* (theimo1221) Fixed compatibility and recompile
* (theimo1221) Updated Packages (which allows node 20 now)
* (theimo1221) Updated Packages
* (theimo1221) Updated Packages
* (theimo1221) Device with Type stickup_cam_longfin didn't yet support #483
* (foxriver76) prepared js-controller v5
* (theimo1221) Improve behavior on initial Location load fail
* (theimo1221) Updated Packages
* (theimo1221) Updated Packages
* (theimo1221) #385 Fix for Unlock Request on intercoms
* (theimo1221) Updated Packages
* (theimo1221) #385 Experimental Ring Intercom support
* (theimo1221) #373 Fix event receiving for iobroker instances without a unique hostname
* (theimo1221) Redeploy
* (theimo1221) Updated Packages
* (theimo1221) #373 Increase logging and change recording order on Doorbell Event
* (theimo1221) #395 Resolve Package-lock.json issues
* (theimo1221) Updated Packages
* (theimo1221) Compliance to the newest ring api version
* (theimo1221) Updated Packages
* (theimo1221) Inline subscription instead of properties for Event observer
* (theimo1221) Updated Packages
* (theimo1221) #376 Handling when reconnect fails
* (theimo1221) Updated Packages
* (theimo1221) Updated Packages
* (theimo1221) Fixed an issue with floodlight control
* (theimo1221) Improved Doorbell Event Logging
* (bluefox) Allowed to be used with node.js 18
* (theimo1221) Improved Log Message on failed Snapshots during event handling
* (theimo1221) Added Support for doorbell oyster
* (theimo1221) Fixed Edge Case resulting in lamps being permanently on
* (theimo1221) Implemented location mode
* (bluefox) Changed the russian translations
* (theimo1221) Prevented missing of events, due to a socket drop within ring-api-client
* (theimo1221) Improved device logging readability
* (theimo1221) Fixed error in beta.11 in regard to new installations
* (theimo1221) Harden Event Handling to prevent rare permanent busy occasions
* (theimo1221) Added support for doorbell device doorbell_graham_cracker
* (theimo1221) Added processing of new token provided by ring.
* (theimo1221) Added lpd_v4` Doorbell
* (theimo1221) For stability reasons, perform an active refresh every 2 hours.
* (theimo1221) Fixed writing to iobroker-data/files folder (thx to Apollon)
* (theimo1221) Prevent Crashes on unsupported devices
* (theimo1221) Record more events (without recording twice)
* (theimo1221) Improved snapshot deleting for initial snapshot after restart
* (theimo1221) Prevented crashes during installation by clearer enforcing of node 16
* (theimo1221) Changes in io-package.json for release workflow
* (theimo1221) Rewrote V3 (Breaking Changes listed below)
* (theimo1221) Updated packages
* (theimo1221) Fixed in GitHub release workflow
* (theimo1221) Fixed adapter checker issues
* (theimo1221) Updated packages
* (theimo1221) Added JS-Controller 4.0 dependency
* (theimo1221) On ding --> First take snapshot then livestream
* (theimo1221) Updated packages
* (theimo1221) Updated packages
* (theimo1221) Stopped adapter on unhandled Error
* (theimo1221) Terminated adapter on invalid ring credentials
* (theimo1221) Updated packages
* (theimo1221) Refactoring
* (theimo1221) Updated packages
* (theimo1221) Updated packages
* (theimo1221) Fixed compatibility issues with new ring api
* (theimo1221) Updated packages due to security patches
* (theimo1221) Bumped version
* (theimo1221) Added new device type spotlightw as doorbell
* (theimo1221) Updated dependencies (ringapi, node-schedule, etc.)
* (theimo1221) Fixed typo preventing Livestream recordings after motion detection
* (theimo1221) Reduced Levels of Log Messages, to not spam iobroker Log
* (theimo1221) Fixing some Issues while saving snapshots and place Snapshots within 'iobroker-data' Folder.
* (theimo1221) Support for Floodlight V2
* (theimo1221) Control Floodlight by Switch
* (Stübi) Added floodlight
* (Stübi) Added new libraries
* (Stübi) Fixed error of missing objects
* (Stübi) Fixed health info like missing battery status (Issue #22, Issue #25)
* (Stübi) Change error handling
* (Stübi) Providing Stick Up Cam (BETA)
* (Stübi) Using variables in the filename of the livestream or snapshot
* (Stübi) Bugfixing
* (Stübi) User can enable/disable external sentry logging
* (Stübi) Node 10 is now required, Node 12 recommended. If you use Node 8 or less, the adapter will stop immediately.
* (Stübi) Tested with js-controller 3. I recommend using js-controller 3 or higher because of sentry logging and more
features in the future
* (Stübi) Snapshot link will be shown as https or http in state (Issue #18)
* (Stübi) Livestream link added and a request button added to get new livestream
* (Stübi) Old snapshots and livestreams can be deleted on the filesystem
* (Stübi) Sentry logging added
* (Stübi) Small improvements and bugfixing
* (Stübi) Added a Two-Factor Auth (2fa) description (Issue #14, Issue #13, Issue #19)
* (Stübi) Bugfixing
* (Stübi) Bugfixing: Login with username and password changed
* (Stübi) New feature (BETA): Now you can make snapshots in jpg and a livestream in mp4 format. Unfortunately, the
snapshot / livestream does not always work!
* (Stübi) Bugfixing
* (Stübi) Using new API. With this API livestreaming and snapshots are possible (work still in progress and not
supported in this version)
* (Stübi) Fixed an error with js-controller 2.0. You need at least this version with js-controller 2.0
* (Stübi) Added two factory authentications
* (Stübi) Bugfixing for Ring Pro
* (Stübi) Major change! I had to change the used ring.com API to another API. The old one did not work anymore. For this
reason, a lot has to be redesigned.
* (Stübi) More debug information
* (Stübi) Support js-controller compact mode
* (Stübi) Added a camera device. For this reason, the device name changed from doorbot to doorbell.
* (Stübi) Update error handling
* (Stübi) Update error handling
* (Stübi) Improvements
* (Stübi) First Version
MIT License
Copyright (c) 2018-2025 Thorsten
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all
copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
SOFTWARE.