lula-hub

!integration-test

Overview

Lula-hub is a simple message broker to leverage Redis. More specifically it is a Node.js WebSocket microservice to sync Redis streams.

Its intended use-case is for reliable distributed messaging.
Its limitation in IoT is that client devices must run Redis 5.

It is intended to be scaleable e.g. via Kubernetes, where each instance connects to the same Redis backend
e.g. a managed instance on your infrastructure provider.

Lula-hub uses lula-auth for session token authentication - see https://github.com/evanx/lula-auth

Lula-hub is used by lula-client to sync events - see https://github.com/evanx/lula-client

Goals

On a remote device, we wish to publish events by adding these to a local Redis stream, e.g.:

``shell
redis-cli XADD lula-client:out:x MAXLEN 10000 * topic 'test' payload '{ "type": "hello-hub" }'
`

Then on our central cloud infrastructure we can consume these events by reading a sync'ed stream e.g.:

`shell
redis-cli XREAD STREAMS lula-hub:in:x "${id}"
`

Similarly for messages to be sent from the hub to remote clients:

`shell
redis-cli XADD lula-hub:out:${clientId}:x MAXLEN 1000 * topic 'test' payload '{ "type": "hello-client" }'
`

The Lula project achieves this by sync'ing such Redis streams reliably via WebSockets:

- lula-hub and lula-auth are deployed to the cloud
- lula-client is deployed to remote devices or services connecting to the hub

Although these repos are tiny and simple, they leverage Redis for exactly-once delivery, consumer groups etc.

$3

Alternatively to XREAD we can use XREADGROUP i.e. Redis "consumer groups" to consume streams e.g.:

`shell
redis-cli XREADGROUP GROUP "${group}" "${consumer}" STREAMS lula-hub:in:x "${id}"
`

In this use-case, each message is delivered to only one of a group collaborating consumers.

See https://redis.io/commands/xreadgroup.

$3

Custom functions whose side effects are limited to Redis are readily testable e.g.:

- setup the state of your test Redis instance
- run your function
- assert that the resulting Redis state is as expected - boom! :)

For example:

`javascript
const bcrypt = require('bcrypt')
const config = require('config')
const Redis = require('ioredis')

describe('register', () => {
const redisClient = new Redis(config.redis)
const state = {
clientId: 'test-client',
}

beforeAll(async () => {
state.clientKey = client:${state.clientId}:h
state.redisTime = await redisClient.time()
}

beforeEach(async () => {
await redisClient.del(state.clientKey)
})

afterAll(async () => {
await redisClient.quit()
})

it('should accept valid registration', async () => {
const payload = {
client: state.clientId,
otpSecret: 'GRZWE3CLNBBTK2LMIRFEM6CCI5WEQR3P',
secret: 'test-secret',
}
... // Run function under test
const bcryptRes = await redisClient.hget(state.clientKey, 'secret')
expect(bcryptRes).toBeTruthy()
await expect(bcrypt.compare(payload.secret, bcryptRes)).resolves.toEqual(true)
})

... // More tests
})
`

$3

We pre-authorize a client to register itself to the hub using a provisioned otpSecret before a regDeadline as follows:

`shell
redis-cli hmset "lula-auth:client:${clientId}:h" otpSecret "${otpSecret}" regDeadline "${regDeadline}"
`

where otpSecret is a TOTP secret, and regDeadline is an epoch in milliseconds.

The lula-auth microservice provides /register and /login endpoints.

The lula-client will /register itself once-off, specifying a self-generated authentication secret, and authenticating its registration using a one-time password using its provisioned otpSecret. If the regDeadline has expired, then this must be extended in Redis in order for the client's registration to succeed.

Thereafter the client can /login using that secret in order to receive an sessionToken for a WebSocket connection to lula-hub.

Lula-auth will create a session "hashes" key in Redis named session:${sessionTokenSha}:h with a field client. Note that the sessionToken is hashed (using SHA1) in Redis.

Lula-client will open a WebSocket connection to lula-hub e.g.:

`javascript
const ws = new WebSocket(wss://${config.hubHost}/sessionToken=${sessionToken})
`

Lula-hub uses the sessionToken from the WebSocket URL query parameters to authenticate the client as follows:

`javascript
const client = await redis.hget(session:${sha1(sessionToken)}:h, 'client')
`

If this Redis session key has expired, we'll get a 401 HTTP error code,
to advise the lula-client to /login again.

$3

This is a daemon process that we run on a client to sync the outgoing stream to the hub, and pull any messages.

#### Client publish to hub

On the client device, custom processes publish messages to the hub simply by adding these into a local Redis stream e.g.:

`javascript
redis-cli XADD 'lula-client:out:x' MAXLEN 10000 * topic 'test' payload '{ "type": "hello-hub" }'
`

Incoming messages from the hub are synced into the stream lula-client:in:x. Custom processes on the device can consume this stream.

#### Client registration

The client device is provisioned with a otpSecret.

When the lula-client starts up for the first time, it must generate and store its secret for authentication.

The client posts its chosen secret and a time-based OTP using its provisioned otpSecret to lula-auth's /register endpoint:

- in the event of a 200 (ok), change the client state to registered
- in the event of an error, then retry /register at long intervals

#### Client sync

A registered client can then /login via lula-auth and sync to lula-hub:

- login using the /login endpoint from lula-auth
- use the session token from /login as the sessionToken in the WebSocket URL for lula-hub
- query the hub's id endpoint for the latest stream ID received from our client
- read the next entry in the out stream using XREAD with that ID
- set the entry's id field to its client stream ID
- post the entry to the hub using the xadd endpoint
- in the event of a 200 (ok), loop to XREAD the next entry
- in the event of a 401 (unauthorized), /login again using lula-auth, then retry
- in the event of a 429 (too many requests), then retry after a delay
- in the event of a 409 (conflict) for a retry, ignore and loop to XREAD the next entry
- in the event of a another error, retry the HTTP request to lula-hub

Note that a 409 indicates the posted id is equal or less than the last id on record,
and so is treated as a duplicate. We expect this in the event of a retry of a
posting where the response was not received, and so we did not know that
it was successfully processed.

$3

We poll for messages for the client from the hub's out:${client} stream as follows:

- query the local Redis for the latest id for hub messages
- if we have not yet received any messages from the hub, then use 0-0 for the id
- with that id read the next message from the hub using its xread endpoint
- if no new message is available, then retry xread with a long blockMs timeout
- set the entry's id field to its remote stream ID
- add that message to the in stream of the local Redis
- atomically store this latest hub id for future resumption
- loop to xread the next hub message

Design

The proposed solution enables simple reliable async messaging with a central hub via HTTPS by leveraging Redis streams.

Clients have a unique client ID, which is set as the client field of their entries posted to the hub's in stream.
This stream includes messages from all clients, in the order in which they are received by the hub.

$3

When an entry is added to a Redis stream, it is assigned an auto-generated sequential ID.
This is essentially the timestamp that the message is added according to Redis' clock.
(See https://redis.io/topics/streams-intro.)

When a client message is posted to the hub, its local stream ID is specified as a field named id.

Clients add outgoing messages to an out stream in their local Redis i.e. using xadd.
Their lula-client process syncs this remote out stream into the hub's in stream.

Messages can be reposted by clients e.g. to retry in the event of a network error.
The hub will ignore messages already received according to the message's sequential ID.
This serves to ensure that messages are not duplicated
and that "exactly-once" delivery can be guaranteed.

$3

Messages are sent to a client by adding them to a stream out:${client} on the hub.

$3

To support the request/response pattern, the response message should reference the ID of the request message.
For example, a response message sync'ed to the hub has the following fields:

- id field for the remote sequential stream ID
- ri field matching the request's id field

When the response is added to the hub's in stream, it will be assigned an auto-generated ID reflecting the hub's Redis clock,
and this differs from its remote id.`

Related

- https://github.com/evanx/lula-auth
- https://github.com/evanx/lula-client