make-data

make-data CSV→CSL-JSON conversion script
==========================================

Acknowledgement
---------------
Juris-M/citeproc-cite-service was developed by Frank Bennett and is a primary output of EURO-EXPERT (n.161814) funded by the European Research Council.

Introduction
------------

In the CULTEXP project, the citation details of cases of interest from each target jurisdiction are written into a spreadsheet, and coded to one or more documents (judgments, expert reports) as appropriate. Spreadsheets have between ten and seventeen columns from a standard schema, with standard headings. [1]

Spreadsheets are then processed using the script documented here, to build a file in a specific format (CSL-JSON) that can be imported into a Jurism client and synced to the cloud service at zotero.org. Data is then fetched from the Zotero API and published to a front-end service for public consumption.

The workflow for adding records to the CULTEXP database thus involves four steps for each jurisdiction:

1. Preparation of a spreadsheet with entries for each document or case to be added to the database;
2. Generation of a well-structured CSL-JSON file for Jurism/Zotero import based on the spreadsheet entries;
3. Import of the CSL-JSON data into a Jurism client, and syncing of the data to the zotero.org cloud server;
4. Pulling of data to the CULTEXP front-end server via the zotero.org API.

Steps (2) and (3) are explained below.

Installing node and npm
---------------------------

The make-data conversion tool is a node script, so node must be installed on the system where CULTEXP spreadsheet data is to be processed. Node is available for free installation:

==================================================

Installing the make-data script
---------------------------------

To install the make-data script, using the command line clone this repository to the target system. Then enter its cultexp subdirectory, install the script's dependencies, and link the script to your profile:

`` example
$> git clone https://github.com/Juris-M/citeproc-cite-service.git
$> cd citeproc-cite-service/cultexp
$> npm install
$> npm link
`

Installing the Legal Resource Registry
--------------------------------------

The make-data conversion script relies on the Legal Resource Registry (LRR) to obtain court and jurisdiction codes. We will clone the LRR into a sibling directory to citeproc-cite-service above:

` example
$> cd ../..
$> git clone https://github.com/Juris-M/legal-resource-registry.git
`

Setting up a jurisdiction
-------------------------

To process a jurisdiction, create an empty directory and place the spreadsheet in it, saving the case listing in CSV format. Also (important!) copy all of the PDF attachment files for the jurisdiction into a single subdirectory named files.

A note on dates: When saving from Excel in CSV format, dates should be set to a numeric form, as "YYYY-MM-DD." With other date formats, the make-data script will throw errors and warnings.

Enter the directory and run the command make-data:

` example
$> cd malta
$> ls
data-malta.csv data-malta.xlsx files
$> make-data
`

This will throw an error and create a configuration file make-data-config.json with the following content:

` example
{
"jurisdictionCode": "xx",
"jurisdictionName": "Laputa",
"jurisdictionDescPath": "/path/to/legal-resource-registry-repo"
}
`

Edit the configuration file to reflect the target jurisdiction and the absolute path to the src subdirectory of the LRR. In this case, we are working on Malta:

` example
{
"jurisdictionCode": "mt",
"jurisdictionName": "Malta",
"jurisdictionDescPath": "/my/path/to/legal-resource-registry/src"
}
`

Preparing a court map
---------------------

With the configuration file in place, run make-data again. The script will issue a string of warnings and generate a file court-code-map.json. This file will be read by make-data to map court names written into the spreadsheet to their respective court codes, optionally also setting a court division and case type, where that information is expressed in the spreadsheet entries. The file is formatted as a series of lists, ordered as follows:

1. Court description (from the spreadsheet)
2. Court code (intially set to the court description)
3. Court division (optional)
4. Case type (optional)

Open the relevant jurisdiction file in the LRR for reference (in this case, the file for Malta is juris-mt-desc.json). The courts section of the file contains the court codes recognized for the jurisdiction.

Edit each entry in court-code-map.json, replacing the second element is each list with the appropriate court code. For example...

` example
[
"Qorti Civili Prim Awla",
"Qorti Civili Prim Awla"
]
`

...becomes...

` example
[
"Qorti Civili Prim Awla",
"qcpa"
]
`

Where the court description includes a court division, add a third element to the list. For example...

` example
[
"Qorti Civili (Sezzjoni tal-Familja)",
"Qorti Civili (Sezzjoni tal-Familja)"
]
`

...becomes...

` example
[
"Qorti Civili (Sezzjoni tal-Familja)",
"qc",
"Sezzjoni tal-Familja"
]
`

Where the court description contains a note of the case type, add that as a fourth element in the list. In this case, if no court division is indicated, set null in the third position. This the following example...

` example
[
"Qorti Civili Prim Áwla (Gurisdizzjoni Kostituzzjonali)",
"Qorti Civili Prim Áwla (Gurisdizzjoni Kostituzzjonali)"
]
`

...becomes...

` example
[
"Qorti Civili Prim Áwla (Gurisdizzjoni Kostituzzjonali)",
"qcpa",
null,
"Gurisdizzjoni Kostituzzjonali"
]
`

If courts are described in the spreadsheet that cannot be found in the LRR record of the jurisdiction, contact the Jurism data manager (Frank Bennett) to request an extension to the jurisdiction data.

Preparing a court jurisdiction map
----------------------------------

In addition to the court-code-map.json file, the make-data script generates a file court-jurisdiction-code.json. Both files are used by the script to generate the final data for import into Jurism, and court codes set in the latter depend on the (edited) mapping lists in the former. It is therefore necessary to regenerate court-jurisdiction-map.json after completing edits to court-code-map.json. To regenerate the file, remove it from the directory and rerun make-data.

` example
$> rm court-jurisdiction-map.json
$> make-data
`

The script will again issue warnings, due to mismatches between court codes and their associated jurisdictions. Open the regenerated file to make any necessary edits.

In the case of Malta, there is only one warning, and one entry in court-jurisdiction-code-map.json, due to an unrecognized jurisdiction "Gozo":

` example
{
"qc::Gozo": {
"court": "qc",
"jurisdiction": "Gozo"
}
}
`

Leaving the qc:Gozo key untouched, and referring to the LRR, we enter the correct jurisdiction code for this island of Malta:

` example
{
"qc::Gozo": {
"court": "qc",
"jurisdiction": "mt:gozo"
}
}
`

Note that the court code and jurisdiction code must be valid partners: in the LRR, the court code must appear in the courts array under the given jurisdiction code. For example:

` example
"mt:gozo": {
"name": "Gozo",
"courts": {
"qc": {}
}
}
`

If a valid jurisdiction for the given court cannot be found in the LRR, or if the jurisdiction itself cannot be found there, contact the Jurism data manager (Frank Bennett) to have the necessary changes made to the LRR jurisdiction records.

Uploading data for a jurisdiction
---------------------------------

Once the above steps have been completed, the make-data script will run without warnings. It will generate a file import-me.json`, which is a valid CSL-JSON import object reflecting all of the entries in the spreadsheet.

To upload data for the jurisdiction, import this file into a Jurism client in the usual way, and sync the library to the Zotero servers.

Final preparation
-----------------

Before data for a jurisdiction is pulled to the front end for the first time, check with the Jurism data manager (Frank Bennett) to be sure that the citation format for the target jurisdiction has been defined.

Footnotes
=========

[1] Spreadsheets have the following column headings (those set in italics are optional):

| | | |
|------------------|----------------------|-------------|
| Doc ID | Year as Volume | Link |
| Date | Volume | Keywords |
| Court Division | Reporter | Area of Law |
| Case Type | Page | Summary |
| Docket Number | Expert Presence | Language |
| Case Name | Expert Instructed By | |