Ping and trace route to many hosts at once.
npm install net-pingThis module implements ICMP Echo (ping) support for [Node.js][nodejs].
This module is installed using [node package manager (npm)][npm]:
npm install net-ping
It is loaded using the require() function:
var ping = require ("net-ping");
A ping session can then be created to ping or trace route to many hosts:
var session = ping.createSession ();
session.pingHost (target, function (error, target) {
if (error)
console.log (target + ": " + error.toString ());
else
console.log (target + ": Alive");
});
[nodejs]: http://nodejs.org "Node.js"
[npm]: https://npmjs.org/ "npm"
This module supports IPv4 using the ICMP, and IPv6 using the ICMPv6.
Each request exposed by this module requires one or more mandatory callback
functions. Callback functions are typically provided an error argument.
All errors are sub-classes of the Error class. For timed out errors the
error passed to the callback function will be an instance of theping.RequestTimedOutError class, with the exposed message attribute set
to Request timed out.
This makes it easy to determine if a host responded, a time out occurred, or
whether an error response was received:
session.pingHost ("1.2.3.4", function (error, target) {
if (error)
if (error instanceof ping.RequestTimedOutError)
console.log (target + ": Not alive");
else
console.log (target + ": " + error.toString ());
else
console.log (target + ": Alive");
});
In addition to the the ping.RequestTimedOutError class, the following errors
are also exported by this module to wrap ICMP error responses:
* DestinationUnreachableError
* PacketTooBigError
* ParameterProblemError
* RedirectReceivedError
* SourceQuenchError
* TimeExceededError
These errors are typically reported by hosts other than the intended target.
In all cases each class exposes a source attribute which will specify the
host who reported the error (which could be the intended target). This will
also be included in the errors message attribute, i.e.:
$ sudo node example/ping-ttl.js 1 192.168.2.10 192.168.2.20 192.168.2.30
192.168.2.10: Alive
192.168.2.20: TimeExceededError: Time exceeded (source=192.168.1.1)
192.168.2.30: Not alive
The Session class will emit an error event for any other error not
directly associated with a request. This is typically an instance of theError class with the errors message attribute specifying the reason.
By default ICMP echo request packets sent by this module are 16 bytes in size.
Some implementations cannot cope with such small ICMP echo requests. For
example, some implementations will return an ICMP echo reply, but will include
an incorrect ICMP checksum.
This module exposes a packetSize option to the createSession() method which
specifies how big ICMP echo request packets should be:
var session = ping.createSession ({packetSize: 64});
Some callbacks used by methods exposed by this module provide two instances of
the JavaScript Date class specifying when the first ping was sent for a
request, and when a request completed.
These parameters are typically named sent and rcvd, and are provided to
help round trip time calculation.
A request can complete in one of two ways. In the first, a ping response is
received and rcvd - sent will yield the round trip time for the request in
milliseconds.
In the second, no ping response is received resulting in a request time out.
In this case rcvd - sent will yield the total time spent waiting for each
retry to timeout if any. For example, if the retries option to thecreateSession() method was specified as 2 and timeout as 2000 thenrcvd - sent will yield more than 6000 milliseconds.
Although this module provides instances of the Date class to help round trip
time calculation the dates and times represented in each instance should not be
considered 100% accurate.
Environmental conditions can affect when a date and time is actually
calculated, e.g. garbage collection introducing a delay or the receipt of many
packets at once. There are also a number of functions through which received
packets must pass, which can also introduce a slight variable delay.
Throughout development experience has shown that, in general the smaller the
round trip time the less accurate it will be - but the information is still
useful nonetheless.
The following sections describe constants exported and used by this module.
This object contains constants which can be used for the networkProtocol
option to the createSession() function exposed by this module. This option
specifies the IP protocol version to use when creating the raw socket.
The following constants are defined in this object:
* IPv4 - IPv4 protocol
* IPv6 - IPv6 protocol
The Session class is used to issue ping and trace route requests to many
hosts. This module exports the createSession() function which is used to
create instances of the Session class.
The createSession() function instantiates and returns an instance of theSession class:
// Default options
var options = {
networkProtocol: ping.NetworkProtocol.IPv4,
packetSize: 16,
retries: 1,
sessionId: (process.pid % 65535),
timeout: 2000,
ttl: 128
};
var session = ping.createSession (options);
The optional options parameter is an object, and can contain the following
items:
* networkProtocol - Either the constant ping.NetworkProtocol.IPv4 or the
constant ping.NetworkProtocol.IPv6, defaults to the constant
ping.NetworkProtocol.IPv4
* packetSize - How many bytes each ICMP echo request packet should be,
defaults to 16, if the value specified is less that 12 then the value
12 will be used (8 bytes are required for the ICMP packet itself, then 4
bytes are required to encode a unique session ID in the request and response
packets)
* retries - Number of times to re-send a ping requests, defaults to 1
* sessionId - A unique ID used to identify request and response packets sent
by this instance of the Session class, valid numbers are in the range of
1 to 65535, defaults to the value of process.pid % 65535
* timeout - Number of milliseconds to wait for a response before re-trying
or failing, defaults to 2000
* ttl - Value to use for the IP header time to live field, defaults to 128
After creating the ping Session object an underlying raw socket will be
created. If the underlying raw socket cannot be opened an exception with be
thrown. The error will be an instance of the Error class.
Seperate instances of the Session class must be created for IPv4 and IPv6.
The close event is emitted by the session when the underlying raw socket
is closed.
No arguments are passed to the callback.
The following example prints a message to the console when the underlying raw
socket is closed:
session.on ("close", function () {
console.log ("socket closed");
});
The error event is emitted by the session when the underlying raw socket
emits an error.
The following arguments will be passed to the callback function:
* error - An instance of the Error class, the exposed message attribute
will contain a detailed error message.
The following example prints a message to the console when an error occurs
with the underlying raw socket, the session is then closed:
session.on ("error", function (error) {
console.log (error.toString ());
session.close ();
});
The close() method closes the underlying raw socket, and cancels all
outstanding requsts.
The calback function for each outstanding ping requests will be called. The
error parameter will be an instance of the Error class, and the message
attribute set to Socket forcibly closed.
The sessoin can be re-used simply by submitting more ping requests, a new raw
socket will be created to serve the new ping requests. This is a way in which
to clear outstanding requests.
The following example submits a ping request and prints the target which
successfully responded first, and then closes the session which will clear the
other outstanding ping requests.
var targets = ["1.1.1.1", "2.2.2.2", "3.3.3.3"];
for (var i = 0; i < targets.length; i++) {
session.pingHost (targets[i], function (error, target) {
if (! error) {
console.log (target);
session.close ();
}
});
}
The getSocket() method returns the underlying raw socket used by the session.
This class is an instance of the Socket class exposed by the
[raw-socket][raw-socket] module. This can be used to modify properties of the
raw socket, such as specifying which network interface ICMP messages should be
sent from.
In the following example the network interface from which to send ICMP messages
is set:
var raw = require("raw-socket") // Required for access to constants
var level = raw.SocketLevel.SOL_SOCKET
var option = raw.SocketOption.SO_BINDTODEVICE
var iface = Buffer.from("eth0")
session.getSocket().setOption(level, option, iface, iface.length)
[raw-socket]: https://www.npmjs.com/package/raw-socket "raw-socket"
The pingHost() method sends a ping request to a remote host.
The target parameter is the dotted quad formatted IP address of the target
host for IPv4 sessions, or the compressed formatted IP address of the target
host for IPv6 sessions.
The callback function is called once the ping requests is complete. The
following arguments will be passed to the callback function:
* error - Instance of the Error class or a sub-class, or null if no
error occurred
* target - The target parameter as specified in the request
still be the target host and NOT the responding gateway
* sent - An instance of the Date class specifying when the first ping
was sent for this request (refer to the Round Trip Time section for more
information)
* rcvd - An instance of the Date class specifying when the request
completed (refer to the Round Trip Time section for more information)
The following example sends a ping request to a remote host:
var target = "fe80::a00:27ff:fe2a:3427";
session.pingHost (target, function (error, target, sent, rcvd) {
var ms = rcvd - sent;
if (error)
console.log (target + ": " + error.toString ());
else
console.log (target + ": Alive (ms=" + ms + ")");
});
The traceRoute() method provides similar functionality to the trace route
utility typically provided with most networked operating systems.
The target parameter is the dotted quad formatted IP address of the target
host for IPv4 sessions, or the compressed formatted IP address of the target
host for IPv6 sessions. The optional ttlOrOptions parameter can be either a
number which specifies the maximum number of hops used by the trace route,
which defaults to the ttl options parameter as defined by thecreateSession() method, or an object which can contain the following
parameters:
* ttl - The maximum number of hops used by the trace route, defaults to the
ttl options parameter as defined by the createSession() method
* maxHopTimeouts - The maximum number of hop timeouts that should occur,
defaults to 3
* startTtl - Starting ttl for the trace route, defaults to 1
Some hosts do not respond to ping requests when the time to live is 0, that
is they will not send back an time exceeded error response. Instead of
stopping the trace route at the first time out this method will move on to the
next hop, by increasing the time to live by 1. It will do this 2 times by
default, meaning that a trace route will continue until the target host
responds or at most 3 request time outs are experienced. The maxHopTimeouts
option above can be used to control how many hop timeouts can occur.
Each requst is subject to the retries and timeout option parameters to thecreateSession() method. That is, requests will be retried per hop as per
these parameters.
This method will not call a single callback once the trace route is complete.
Instead the feedCallback function will be called each time a ping response is
received or a time out occurs. The following arguments will be passed to thefeedCallback function:
* error - Instance of the Error class or a sub-class, or null if no
error occurred
* target - The target parameter as specified in the request
* ttl - The time to live used in the request which triggered this respinse
* sent - An instance of the Date class specifying when the first ping
was sent for this request (refer to the Round Trip Time section for more
information)
* rcvd - An instance of the Date class specifying when the request
completed (refer to the Round Trip Time section for more information)
Once a ping response has been received from the target, or more than three
request timed out errors are experienced, the doneCallback function will be
called. The following arguments will be passed to the doneCallback function:
* error - Instance of the Error class or a sub-class, or null if no
error occurred
* target - The target parameter as specified in the request
Once the doneCallback function has been called the request is complete and
the requestCallback function will no longer be called.
If the feedCallback function returns a true value when called the trace route
will stop and the doneCallback will be called.
The following example initiates a trace route to a remote host:
function doneCb (error, target) {
if (error)
console.log (target + ": " + error.toString ());
else
console.log (target + ": Done");
}
function feedCb (error, target, ttl, sent, rcvd) {
var ms = rcvd - sent;
if (error) {
if (error instanceof ping.TimeExceededError) {
console.log (target + ": " + error.source + " (ttl="
+ ttl + " ms=" + ms +")");
} else {
console.log (target + ": " + error.toString ()
+ " (ttl=" + ttl + " ms=" + ms +")");
}
} else {
console.log (target + ": " + target + " (ttl=" + ttl
+ " ms=" + ms +")");
}
}
session.traceRoute ("192.168.10.10", 10, feedCb, doneCb);
Example programs are included under the modules example directory.
* Initial release
* Minor corrections to the README.md
* Add note to README.md about error handling
* Timed out errors are now instances of the ping.RequestTimedOutError
object
* The RequestTimedOutError class is not being exported
* Support IPv6
* The ping.Session.close() method was not undefining the sessions raw
socket after closing
* Return self from the pingHost() method to chain method calls
* Use the raw.Socket.pauseRecv() and raw.Socket.resumeRecv() methods
instead of closing a socket when there are no more outstanding requests
* Sessions were limited to sending 65535 ping requests
* Add the packetSize option to the createSession() method to specify how
many bytes each ICMP echo request packet should be
* Incorrectly parsing ICMP error responses resulting in responses matching
the wrong request
* Use a unique session ID per instance of the Session class to identify
requests and responses sent by a session
* Added the (internal) _debugRequest() and _debugResponse() methods, and
the _debug option to the createSession() method
* Added example programs ping-ttl.js and ping6-ttl.js
* Use MIT license instead of GPL
* Session IDs are now 2 bytes (previously 1 byte), and request IDs are also
now 2 bytes (previously 3 bytes)
* Each ICMP error response now has an associated error class (e.g. the
Time exceeded response maps onto the ping.TimeExceededError class)
* Call request callbacks with an error when there are no free request IDs
because of too many outstanding requests
* Added the traceRoute() method
* Added the ttl option parameter to the createSession() method, and
updated the example programs ping-ttl.js and ping6-ttl.js to use it
* Response callback for pingHost() now includes two instances of the
Date class to specify when a request was sent and a response received
* Use raw.Socket.createChecksum() instead of automatic checksum generation
* Use raw.Socket.writeChecksum() instead of manually rendering checksums
* Echo requests sent by this module are processed like responses when sent to
the 127.0.0.1 and ::1 addresses
* Cannot specify the retries parameter for the Session class as 0
* Added example program ping-retries-0.js
* Host repository on GitHub
* Wrong callback called in the traceRoute() method when a session ID cannot
be generated
* Renamed the optional ttl parameter to the traceRoute() method to
ttlOrOptions, and it is still optional
* Permit users to control the number of permitted hop timeouts for the
traceRoute() method, added the maxHopTimeouts parameter to the
traceRoute() methods options
* The traceRoute() method can start its trace at a higher ttl, added the
startTtl parameter to the traceRoute() methods options
* The _expandConstantObject() function was declaring variables with global
scope
* Document the Socket.getSocket() method
* Set NoSpaceships Ltd to be the owner and maintainer
* Remove redundant sections from README.md
* Fix deprecation warning for new Buffer()
Copyright (c) 2018 NoSpaceships Ltd
Copyright (c) 2013 Stephen Vickers
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE SOFTWARE.