Wake up devices on your network via Pimatic
npm install pimatic-wakeonlan
Plugin to Wake up you network devices using Pimatic
Optionally, you can also set the broadcastAddress property to define the broadcast address, which is 255.255.255.255 by default.
This may be required if you have an IPv6 network or you are running pimatic on Windows as Windows only routes packets with the global broadcast address to the first network interface. For the latter case a network-specific broadcast address may be specified to route packets to the appropriate network interface.
{
"plugin": "wakeonlan"
}
Devices for Wakeup can be defined by adding them to the devices section in the config file or using the device tab on the mobile frontend. Set the class attribute to WakeOnLanDevice. For example:
{
"class": "WakeOnLanDevice",
"id": "pc-dad",
"name": "PC-Dad",
"mac": "11:22:33:44:55:66"
}
If you don't know the device mac address you also can use the device ip address. For example:
{
"class": "WakeOnLanDevice",
"id": "pc-dad",
"name": "PC-Dad",
"host": "192.168.178.10"
}
| Property | Default | Type | Description |
|:------------------|:---------|:--------|:--------------------------------------------|
| mac | - | String | MAC address of destination host|
| host | - | String | IP address or hostname of destination host|
wol or wakeup as command:WHEN {...} THEN wol "11:22:33:44:55:66" orWHEN {...} THEN wakeup "11:22:33:44:55:66"
See Release History.
Copyright (c) thost96. All rights reserved.
License: GPL-2.0.
Icon made by Freepik is licensed free for non commercial use.