Quirkbot Arduino Hardware

Deploying Releases

- Install node dependencies:
``
npm install
`
- Use node version 10 (tested with 14 and it doesn't work):
`
nvm use 10
`
- Update the version in package.json
- Run:
`
npm run gulp -- build
`
- When you are completely satisfied with the deployed release, run:
`
npm publish
`
- Create a git tag.
- Make a manual Github release and upload the generated _quirkbot-arduino-hardware-*.zip_.
- Make sure to update the Unofficial list of 3rd party boards support urls.

Updating dependencies

Make sure to keep them updated!

$3

Copied from Arduino AVR Boards.

Check what is the latest version at the package index.

You need to patch the D_CONFIG macro from USBCore.h so it reports the board as self powered and with a maximum consumption of 100mA.
`
#define D_CONFIG(_totalLength,_interfaces) \
{ 9, 2, _totalLength,_interfaces, 1, 0, USB_CONFIG_SELF_POWERED | USB_CONFIG_REMOTE_WAKEUP, USB_CONFIG_POWER_MA(USB_CONFIG_POWER) }
`

You need to patch CDC.cpp auto-reset routine. Add the line for (;;); right after the wdt_enable(WDTO_120MS);:
`
// Store boot key
(uint16_t )magic_key_pos = MAGIC_KEY;
// Save the watchdog state in case the reset is aborted.
wdtcsr_save = WDTCSR;
wdt_enable(WDTO_120MS);
for (;;); // add this line
`

You need to patch USBCore.cpp USB_Send function. We want to remove the 250
timeout completely.

Replace the block:
`
u8 n = USB_SendSpace(ep);
if (n == 0)
{
if (!(--timeout))
return -1;
delay(1);
continue;
}
`
With:
`
u8 n = USB_SendSpace(ep);
if (n == 0)
{
return -1;
}
`

$3


##### HID
Copied from Arduino AVR Boards.*

##### Wire
Copied from Arduino AVR Boards.*

(*)`Check what is the latest version at the package index.

##### Servo
From git - https://github.com/Quirkbot/Servo

##### Keyboard
From git - https://github.com/Quirkbot/Keyboard

##### Mouse
From git - https://github.com/Quirkbot/Mouse

##### MIDIUSB
From git - https://github.com/Quirkbot/MIDIUSB