Rolling Spider for Node.js

An implementation of the networking protocols (Bluetooth LE) used by the
Parrot MiniDrone - Rolling Spider and Airborne Night Drone - MACLANE. This offers an off-the-shelf $99 USD drone that can be controlled by JS -- yay!

Prerequisites:

* See noble prerequisites for your platform

To install:

``bash
npm install rolling-spider
`

Status

Stable!

Getting Started

There are a few steps you should take when getting started with this. We're going to learn how to get there by building out a simple script that will take off, move forward a little, then land.

$3

To connect you need to create a new Drone instance.

`javascript
var RollingSpider = require("rolling-spider");

var rollingSpider = new RollingSpider();
`

After you've created an instance you now have access to all the functionality of the drone, but there is some stuff you need to do first, namely connecting, running the setup, and starting the ping to keep it connected.

`javascript
var RollingSpider = require("rolling-spider");

var rollingSpider = new RollingSpider();

// NEW CODE BELOW HERE

rollingSpider.connect(function() {
rollingSpider.setup(function() {
rollingSpider.startPing();
});
});
`


$3

We're now going to create a function that takes a drone and then by using a sequence of temporal tasks creates a timed sequence of calls to actions on the drone.

We recommend using temporal over a series of setTimeout chained calls for your sanity. Please abide by this when playing with the drone and ESPECIALLY if filing a ticket.

`javascript
'use strict';

var RollingSpider = require('rolling-spider');
var temporal = require('temporal');
var rollingSpider = new RollingSpider();

rollingSpider.connect(function () {
rollingSpider.setup(function () {
rollingSpider.flatTrim();
rollingSpider.startPing();
rollingSpider.flatTrim();

temporal.queue([
{
delay: 5000,
task: function () {
rollingSpider.takeOff();
rollingSpider.flatTrim();
}
},
{
delay: 3000,
task: function () {
rollingSpider.forward();
}
},
{
delay: 5000,
task: function () {
rollingSpider.land();
}
},
{
delay: 5000,
task: function () {
temporal.clear();
process.exit(0);
}
}
]);
});
});

`

$3

And there you have it, you can now control your drone.

$3

![Spider Swarm](http://www.youtube.com/watch?v=PLWJMR61Qs0)

Previous versions of the rolling-spider library required you to specify the UUID for your drone through a discover process. This has been removed in favor of just using the first BLE device that broadcasts with "RS_" as its localname. If you are flying multiple minidrones or in a very populated BLE area, you will want to use the discovery process in order to identify specifically the drone(s) you want to control. Use the Discovery Tool to get the UUID of all nearby BLE devices.

If you want to fly multiple drones at once, please use the Swarm API for that. An example of the swarm, as well as other examples, is available in the eg/ directory. Source Code Sample

$3

#### RollingSpider.createClient([options]) __or__ new RollingSpider([options])

Options

> * uuid: The uuid (Bluetooth UUID) or the Published Name (something like RS_XXXXXX) of the drone. Defaults to finding first announced. Can be a list of uuids that are separated by a comma (in the case of a string) or as an array of strings.
> * logger: The logging engine to utilize. Defaults to debug, but you could provide console.log or other similar logging system that can accept strings and output them.
> * forceConnect: When set to true, this will not wait for the bluetooth module to settle. This is necessary for some known use cases.

#### client.connect([callback])

Connects to the drone over BLE. callback is invoked when it is connected or receives an error if there is a problem establishing the connection.

#### client.setup([callback])

Sets up the connection to the drone and enumerate all of the services and characteristics. callback is invoked when setup completes or receives an error if there is a problem setting up the connection.

#### client.on('battery', callback)

Event that is emitted on battery change activity. Caution, battery drains pretty fast on this so this may create a high velocity of events.

#### client.takeoff(callback) __or__ client.takeOff(callback)

Sets the internal fly state to true, callback is invoked after the drone
reports that it is hovering.

#### client.land(callback)

Sets the internal fly state to false, callback is invoked after the drone
reports it has landed.

#### client.up([options], [callback]) / client.down([options], [callback])

Options

> * speed at which the drive should occur, a number from 0 to 100 inclusive.
> * steps the length of steps (time) the drive should happen, a number from 0 to 100 inclusive.

Makes the drone gain or reduce altitude. callback is invoked after all the steps are completed.

#### client.clockwise([options], [callback]) / client.counterClockwise([options], [callback]) __or__ client.turnRight([options], [callback]) / client.turnLeft([options], [callback])

Options

> * speed at which the rotation should occur
> * steps the length of steps (time) the turning should happen, a number from 0 to 100 inclusive.

Causes the drone to spin. callback is invoked after all the steps are completed.

#### client.forward([options], [callback]) / client.backward([options], [callback])

> * speed at which the drive should occur, a number from 0 to 100 inclusive.
> * steps the length of steps (time) the drive should happen, a number from 0 to 100 inclusive.

Controls the pitch. callback is invoked after all the steps are completed.

#### client.left([options], [callback]) / client.right([options], [callback]) __or__ client.tiltLeft([options], [callback]) / client.tiltRight([options], [callback])

> * speed at which the drive should occur, a number from 0 to 100 inclusive.
> * steps the length of steps (time) the drive should happen, a number from 0 to 100 inclusive.

Controls the roll, which is a horizontal movement. callback is invoked after all the steps are completed.

#### client.frontFlip([callback])

Causes the drone to do an amazing front flip.

#### client.backFlip([callback])

Causes the drone to do an amazing back flip.

#### client.leftFlip([callback])

Causes the drone to do an amazing left flip. DO NOT USE WITH WHEELS ON!!!

#### client.rightFlip([callback])

Causes the drone to do an amazing right flip. DO NOT USE WITH WHEELS ON!!!


#### client.calibrate([callback]) __or__ client.flatTrim([callback])

Resets the trim so that your drone's flight is stable. It should always be
called before taking off.


#### client.signalStrength(callback)

Obtains the signal strength as an RSSI value returned as the second parameter of the callback.

#### client.disconnect([callback])

Disconnects from the drone if it is connected.


#### client.emergancy([callback]) __or__ client.emergency([callback])

Causes the drone to shut off the motors "instantly" (sometimes has to wait for other commands ahead of it to complete... not fully safe yet)

$3

If you have more than one (or ten) Rolling Spiders, you will eventually want to control them all as a single, somewhat unified swarm. This became such a common request, we made it part of the API for the RollingSpider. This will allow you to initialize a set of members, defined or otherwise, and broadcast commands to them all at once.

Common implementation boilerplate

`javascript

var Swarm = require('rolling-spider').Swarm;
var swarm = new Swarm({timeout: 10});

swarm.assemble();

swarm.on('assembled', function () {
// For The Swarm!!!!!
});


`


#### new Swarm(options)


Options (anything additional is passed on to individual members upon initialization)

> * membership: The uuid(s) or the Published Name(s) of the drone that are members of the swarm. If left empty/undefined, it will find any and all Rolling Spiders it can possibly find.
> * timeout: The number of seconds before closing the membership forcibly. Use this to ensure that membership enrollment doesn't last forever.
> * forceConnect: When set to true, this will not wait for the bluetooth module to settle. This is necessary for some known use cases.

#### swarm.assemble([callback])

Initiates the swarm collection process. This will attempt to seek out bluetooth RollingSpiders that have been identified in the membership or isMember validation components and enrolls them into the swarm.

#### swarm.closeMembership([callback])

Stops the open membership process and sets the swarm to active.

#### swarm.at(id, [callback])

Returns (or executes provided callback) with the swarm member that has the provided id` value for localName or UUID. Use this to issue commands to specific drones in the swarm.

#### swarm.isMember(device)

Returns true if the provide device should be admitted as a member of the swarm or false if it should be ignored. Can be overridden for more complex membership definition.

#### swarm.release([callback])

Releases all of the drones from the swarm.

#### Broadcasted Commands e.g. swarm.takeOff([options], [callback])

All other commands for the swarm follow the command structure of an individual RollingSpider and it is broadcast to all roughly at the same time (bluetooth isn't always exact.) The signature is the same for all of the commands and passes options and a callback to the function.