SSH2 and SFTP(v3) client/server protocol streams for node.js
npm install ssh2-streamsDescription
===========
SSH2 and SFTP(v3) client/server protocol streams for node.js.
Requirements
============
* node.js -- v5.10.0 or newer
Install
=======
npm install ssh2-streams
API
===
require('ssh2-streams').SSH2Stream returns an _SSH2Stream_ constructor.
require('ssh2-streams').SFTPStream returns an _SFTPStream_ constructor.
require('ssh2-streams').utils returns an _object_ of useful utility functions.
require('ssh2-streams').constants returns an _object_ containing useful SSH protocol constants.
SSH2Stream events
-----------------
Client/Server events
* header(< _object_ >headerInfo) - Emitted when the protocol header is seen. headerInfo contains:
* greeting - _string_ - (Client-only) An optional greeting message presented by the server.
* identRaw - _string_ - The raw identification string sent by the remote party.
* versions - _object_ - Contains various information parsed from identRaw:
* protocol - _string_ - The protocol version (always 1.99 or 2.0) supported by the remote party.
* software - _string_ - The software name used by the remote party.
* comments - _string_ - Any additional text that comes after the software name.
* GLOBAL_REQUEST(< _string_ >reqName, < _boolean_ >wantReply, < _mixed_ >reqData)
* CHANNEL_DATA:\
* CHANNEL_EXTENDED_DATA:\
* CHANNEL_WINDOW_ADJUST:\
* CHANNEL_SUCCESS:\
* CHANNEL_FAILURE:\
* CHANNEL_EOF:\
* CHANNEL_CLOSE:\
* CHANNEL_OPEN_CONFIRMATION:\channelInfo contains:
* recipient - _integer_ - The local channel number.
* sender - _integer_ - The remote party's channel number.
* window - _integer_ - The initial window size for the channel.
* packetSize - _integer_ - The maximum packet size for the channel.
* CHANNEL_OPEN_FAILURE:\failInfo contains:
* recipient - _integer_ - The local channel number.
* reasonCode - _integer_ - The reason code of the failure.
* reason - _string_ - A text representation of the reasonCode.
* description - _string_ - An optional description of the failure.
* DISCONNECT(< _string_ >reason, < _integer_ >reasonCode, < _string_ >description)
* DEBUG(< _string_ >message)
* NEWKEYS()
* REQUEST_SUCCESS([< _Buffer_ >resData])
* REQUEST_FAILURE()
Client-only events
* fingerprint(< _Buffer_ >hostKey, < _function_ >callback) - This event allows you to verify a host's key. If callback is called with true, the handshake continues. Otherwise a disconnection will occur if callback is called with false. The default behavior is to auto-allow any host key if there are no handlers for this event.
* SERVICE_ACCEPT(< _string_ >serviceName)
* USERAUTH_PASSWD_CHANGEREQ(< _string_ >message)
* USERAUTH_INFO_REQUEST(< _string_ >name, < _string_ >instructions, < _string_ >lang, < _array_ >prompts)
* USERAUTH_PK_OK()
* USERAUTH_SUCCESS()
* USERAUTH_FAILURE(< _array_ >methodsContinue, < _boolean_ >partialSuccess)
* USERAUTH_BANNER(< _string_ >message)
* CHANNEL_OPEN(< _object_ >channelInfo) - channelInfo contains:
* type - _string_ - The channel type (e.g. x11, forwarded-tcpip).
* sender - _integer_ - The remote party's channel number.
* window - _integer_ - The initial window size for the channel.
* packetSize - _integer_ - The maximum packet size for the channel.
* data - _object_ - The properties available depend on type:
* x11:
* srcIP - _string_ - Source IP address of X11 connection request.
* srcPort - _string_ - Source port of X11 connection request.
* forwarded-tcpip:
* srcIP - _string_ - Source IP address of incoming connection.
* srcPort - _string_ - Source port of incoming connection.
* destIP - _string_ - Destination IP address of incoming connection.
* destPort - _string_ - Destination port of incoming connection.
* forwarded-streamlocal@openssh.com:
* socketPath - _string_ - Source socket path of incoming connection.
* auth-agent@openssh.com has no extra data.
* CHANNEL_REQUEST:\reqInfo properties depend on reqInfo.request:
* exit-status:
* code - _integer_ - The exit status code of the remote process.
* exit-signal:
* signal - _string_ - The signal name.
* coredump - _boolean_ - Was the exit the result of a core dump?
* description - _string_ - An optional error message.
Server-only events
* SERVICE_REQUEST(< _string_ >serviceName)
* USERAUTH_REQUEST(< _string_ >username, < _string_ >serviceName, < _string_ >authMethod, < _mixed_ >authMethodData) - authMethodData depends on authMethod:
* For password, it's a _string_ containing the password.
* For publickey, it's an _object_ containing:
* keyAlgo - _string_ - The public key algorithm.
* key - _Buffer_ - The public key data.
* signature - _mixed_ - If set, it is a _Buffer_ containing the signature to be verified.
* blob - _mixed_ - If set, it is a _Buffer_ containing the data to sign. The resulting signature is what is compared to signature.
* For hostbased, it's an _object_ including the properties from publickey but also:
* localHostname - _string_ - The client's hostname to be verified.
* localUsername - _string_ - The client's (local) username to be verified.
* USERAUTH_INFO_RESPONSE(< _array_ >responses)
* GLOBAL_REQUEST(< _string_ >reqName, < _boolean_ >wantReply, < _mixed_ >reqData) - reqData depends on reqName:
* For tcpip-forward/cancel-tcpip-forward, it's an _object_ containing:
* bindAddr - _string_ - The IP address to start/stop binding to.
* bindPort - _string_ - The port to start/stop binding to.
* For streamlocal-forward@openssh.com/cancel-streamlocal-forward@openssh.com, it's an _object_ containing:
* socketPath - _string_ - The socket path to start/stop listening on.
* For no-more-sessions@openssh.com, there is no reqData.
For any other requests, it's a _Buffer_ containing raw request-specific data if* there is any extra data.
* CHANNEL_OPEN(< _object_ >channelInfo) - channelInfo contains:
* type - _string_ - The channel type (e.g. session, direct-tcpip).
* sender - _integer_ - The remote party's channel number.
* window - _integer_ - The initial window size for the channel.
* packetSize - _integer_ - The maximum packet size for the channel.
* data - _object_ - The properties available depend on type:
* direct-tcpip:
* srcIP - _string_ - Source IP address of outgoing connection.
* srcPort - _string_ - Source port of outgoing connection.
* destIP - _string_ - Destination IP address of outgoing connection.
* destPort - _string_ - Destination port of outgoing connection.
* direct-streamlocal@openssh.com:
* socketPath - _string_ - Destination socket path of outgoing connection.
* session has no extra data.
* CHANNEL_REQUEST:\reqInfo properties depend on reqInfo.request:
* pty-req:
* wantReply - _boolean_ - The client is requesting a response to this request.
* term - _string_ - The terminal type name.
* cols - _integer_ - The number of columns.
* rows - _integer_ - The number of rows.
* width - _integer_ - The width in pixels.
* height - _integer_ - The height in pixels.
* modes - _object_ - The terminal modes.
* window-change:
* cols - _integer_ - The number of columns.
* rows - _integer_ - The number of rows.
* width - _integer_ - The width in pixels.
* height - _integer_ - The height in pixels.
* x11-req:
* wantReply - _boolean_ - The client is requesting a response to this request.
* single - _boolean_ - Whether only a single X11 connection should be allowed.
* protocol - _string_ - The X11 authentication protocol to be used.
* cookie - _string_ - The hex-encoded X11 authentication cookie.
* screen - _integer_ - The screen number for incoming X11 connections.
* env:
* wantReply - _boolean_ - The client is requesting a response to this request.
* key - _string_ - The environment variable name.
* val - _string_ - The environment variable value.
* shell:
* wantReply - _boolean_ - The client is requesting a response to this request.
* exec:
* wantReply - _boolean_ - The client is requesting a response to this request.
* command - _string_ - The command to be executed.
* subsystem:
* wantReply - _boolean_ - The client is requesting a response to this request.
* subsystem - _string_ - The name of the subsystem.
* signal:
* signal - _string_ - The signal name (prefixed with SIG).
* xon-xoff:
* clientControl - _boolean_ - Client can/can't perform flow control (control-S/control-Q processing).
* auth-agent-req@openssh.com has no reqInfo.
SSH2Stream properties
---------------------
* bytesSent - _integer_ - The number of bytes sent since the last keying. This metric can be useful in determining when to call rekey().
* bytesReceived - _integer_ - The number of bytes received since the last keying. This metric can be useful in determining when to call rekey().
SSH2Stream methods
------------------
* (constructor)(< _object_ >config) - Creates and returns a new SSH2Stream instance. SSH2Stream instances are Duplex streams. config can contain:
* server - _boolean_ - Set to true to create an instance in server mode. Default: false
* hostKeys - _object_ - If in server mode, an object keyed on host key format (see supported serverHostKey values in algorithms option below) with values being (decrypted) _Buffer_s or _string_s that contain PEM-encoded (OpenSSH format) host private key(s). Default: (none)
* greeting - _string_ - If in server mode, an optional message to send to the user immediately upon connection, before the handshake. Note: Most clients usually ignore this. Default: (none)
* banner - _string_ - If in server mode, an optional message to send to the user once, right before authentication begins. Default: (none)
* ident - _string_ - A custom software name/version identifier. Default: 'ssh2js' + moduleVersion + 'srv' (server mode) 'ssh2js' + moduleVersion (client mode)
* maxPacketSize - _string_ - This is the maximum packet size that will be accepted. It should be 35000 bytes or larger to be compatible with other SSH2 implementations. Default: 35000
highWaterMark - _integer_ - This is the highWaterMark to use for the stream. Default: 32 1024
* algorithms - _object_ - This option allows you to explicitly override the default transport layer algorithms used for the connection. Each value must be an array of valid algorithms for that category. The order of the algorithms in the arrays are important, with the most favorable being first. Valid keys:
* kex - _array_ - Key exchange algorithms.
* Default values:
1. curve25519-sha256 (node v13.9.0 or newer)
2. curve25519-sha256@libssh.org (node v13.9.0 or newer)
3. ecdh-sha2-nistp256 (node v0.11.14 or newer)
4. ecdh-sha2-nistp384 (node v0.11.14 or newer)
5. ecdh-sha2-nistp521 (node v0.11.14 or newer)
6. diffie-hellman-group-exchange-sha256 (node v0.11.12 or newer)
7. diffie-hellman-group14-sha256
8. diffie-hellman-group16-sha512
9. diffie-hellman-group18-sha512
10. diffie-hellman-group14-sha1
* Supported values:
* curve25519-sha256 (node v13.9.0 or newer)
* curve25519-sha256@libssh.org (node v13.9.0 or newer)
* ecdh-sha2-nistp256 (node v0.11.14 or newer)
* ecdh-sha2-nistp384 (node v0.11.14 or newer)
* ecdh-sha2-nistp521 (node v0.11.14 or newer)
* diffie-hellman-group-exchange-sha1 (node v0.11.12 or newer)
* diffie-hellman-group-exchange-sha256 (node v0.11.12 or newer)
* diffie-hellman-group1-sha1
* diffie-hellman-group14-sha1
* diffie-hellman-group14-sha256
* diffie-hellman-group16-sha512
* diffie-hellman-group18-sha512
* cipher - _array_ - Ciphers.
* Default values:
1. aes128-ctr
2. aes192-ctr
3. aes256-ctr
4. aes128-gcm (node v0.11.12 or newer)
5. aes128-gcm@openssh.com (node v0.11.12 or newer)
6. aes256-gcm (node v0.11.12 or newer)
7. aes256-gcm@openssh.com (node v0.11.12 or newer)
* Supported values:
* aes128-ctr
* aes192-ctr
* aes256-ctr
* aes128-gcm (node v0.11.12 or newer)
* aes128-gcm@openssh.com (node v0.11.12 or newer)
* aes256-gcm (node v0.11.12 or newer)
* aes256-gcm@openssh.com (node v0.11.12 or newer)
* aes256-cbc
* aes192-cbc
* aes128-cbc
* blowfish-cbc
* 3des-cbc
* arcfour256
* arcfour128
* cast128-cbc
* arcfour
* serverHostKey - _array_ - Server host key formats. In server mode, this list must agree with the host private keys set in the hostKeys config setting.
* Default values:
1. ssh-ed25519 (node v12.0.0 or newer)
2. ecdsa-sha2-nistp256 (node v5.2.0 or newer)
3. ecdsa-sha2-nistp384 (node v5.2.0 or newer)
4. ecdsa-sha2-nistp521 (node v5.2.0 or newer)
5. ssh-rsa
* Supported values:
* ssh-ed25519 (node v12.0.0 or newer)
* ssh-rsa
* ecdsa-sha2-nistp256 (node v5.2.0 or newer)
* ecdsa-sha2-nistp384 (node v5.2.0 or newer)
* ecdsa-sha2-nistp521 (node v5.2.0 or newer)
* ssh-dss
* hmac - _array_ - (H)MAC algorithms.
* Default values:
1. hmac-sha2-256
2. hmac-sha2-512
3. hmac-sha1
* Supported values:
* hmac-sha2-256
* hmac-sha2-512
* hmac-sha1
* hmac-md5
* hmac-sha2-256-96
* hmac-sha2-512-96
* hmac-ripemd160
* hmac-sha1-96
* hmac-md5-96
* compress - _array_ - Compression algorithms.
* Default values:
1. none
2. zlib@openssh.com
3. zlib
* Supported values:
* none
* zlib@openssh.com
* zlib
* debug - _function_ - Set this to a function that receives a single string argument to get detailed (local) debug information. Default: (none)
Client/Server methods
* ping() - _boolean_ - Writes a dummy GLOBAL_REQUEST packet (specifically "keepalive@openssh.com") that requests a reply. Returns false if you should wait for the continue event before sending any more traffic.
* disconnect([< _integer_ >reasonCode]) - _boolean_ - Writes a disconnect packet and closes the stream. Returns false if you should wait for the continue event before sending any more traffic.
* rekey() - _boolean_ - Starts the re-keying process. Incoming/Outgoing packets are buffered until the re-keying process has finished. Returns false to indicate that no more packets should be written until the NEWKEYS event is seen.
* requestSuccess([< _Buffer_ >data]) - _boolean_ - Writes a request success packet. Returns false if you should wait for the continue event before sending any more traffic.
* requestFailure() - _boolean_ - Writes a request failure packet. Returns false if you should wait for the continue event before sending any more traffic.
* channelSuccess() - _boolean_ - Writes a channel success packet. Returns false if you should wait for the continue event before sending any more traffic.
* channelFailure() - _boolean_ - Writes a channel failure packet. Returns false if you should wait for the continue event before sending any more traffic.
* channelEOF(< _integer_ >channel) - _boolean_ - Writes a channel EOF packet for the given channel. Returns false if you should wait for the continue event before sending any more traffic.
* channelClose(< _integer_ >channel) - _boolean_ - Writes a channel close packet for the given channel. Returns false if you should wait for the continue event before sending any more traffic.
* channelWindowAdjust(< _integer_ >channel, < _integer_ >amount) - _boolean_ - Writes a channel window adjust packet for the given channel where amount is the number of bytes to add to the channel window. Returns false if you should wait for the continue event before sending any more traffic.
* channelData(< _integer_ >channel, < _mixed_ >data) - _boolean_ - Writes a channel data packet for the given channel where data is a _Buffer_ or _string_. Returns false if you should wait for the continue event before sending any more traffic.
* channelExtData(< _integer_ >channel, < _mixed_ >data, < _integer_ >type) - _boolean_ - Writes a channel extended data packet for the given channel where data is a _Buffer_ or _string_. Returns false if you should wait for the continue event before sending any more traffic.
* channelOpenConfirm(< _integer_ >remoteChannel, < _integer_ >localChannel, < _integer_ >initWindow, < _integer_ >maxPacket) - _boolean_ - Writes a channel open confirmation packet. Returns false if you should wait for the continue event before sending any more traffic.
* channelOpenFail(< _integer_ >remoteChannel, < _integer_ >reasonCode[, < _string_ >description]) - _boolean_ - Writes a channel open failure packet. Returns false if you should wait for the continue event before sending any more traffic.
Client-only methods
* service(< _string_ >serviceName) - _boolean_ - Writes a service request packet for serviceName. Returns false if you should wait for the continue event before sending any more traffic.
* tcpipForward(< _string_ >bindAddr, < _integer_ >bindPort[, < _boolean_ >wantReply]) - _boolean_ - Writes a tcpip forward global request packet. wantReply defaults to true. Returns false if you should wait for the continue event before sending any more traffic.
* cancelTcpipForward(< _string_ >bindAddr, < _integer_ >bindPort[, < _boolean_ >wantReply]) - _boolean_ - Writes a cancel tcpip forward global request packet. wantReply defaults to true. Returns false if you should wait for the continue event before sending any more traffic.
* authPassword(< _string_ >username, < _string_ >password) - _boolean_ - Writes a password userauth request packet. Returns false if you should wait for the continue event before sending any more traffic.
* authPK(< _string_ >username, < _object_ >pubKey[, < _function_ >cbSign]) - _boolean_ - Writes a publickey userauth request packet. pubKey is the object returned from using utils.parseKey() on a private or public key. If cbSign is not present, a pubkey check userauth packet is written. Otherwise cbSign is called with (blob, callback), where blob is the data to sign with the private key and the resulting signature _Buffer_ is passed to callback as the first argument. Returns false if you should wait for the continue event before sending any more traffic.
* authHostbased(< _string_ >username, < _object_ >pubKey, < _string_ >localHostname, < _string_ >localUsername, < _function_ >cbSign) - _boolean_ - Writes a hostbased userauth request packet. pubKey is the object returned from using utils.parseKey() on a private or public key. cbSign is called with (blob, callback), where blob is the data to sign with the private key and the resulting signature _Buffer_ is passed to callback as the first argument. Returns false if you should wait for the continue event before sending any more traffic.
* authKeyboard(< _string_ >username) - _boolean_ - Writes a keyboard-interactive userauth request packet. Returns false if you should wait for the continue event before sending any more traffic.
* authNone(< _string_ >username) - _boolean_ - Writes a "none" userauth request packet. Returns false if you should wait for the continue event before sending any more traffic.
* authInfoRes(< _array_ >responses) - _boolean_ - Writes a userauth info response packet. responses is an _array_ of zero or more strings corresponding to responses to prompts previously sent by the server. Returns false if you should wait for the continue event before sending any more traffic.
* directTcpip(< _integer_ >channel, < _integer_ >initWindow, < _integer_ >maxPacket, < _object_ >config) - _boolean_ - Writes a direct tcpip channel open packet. config must contain srcIP, srcPort, dstIP, and dstPort. Returns false if you should wait for the continue event before sending any more traffic.
* session(< _integer_ >channel, < _integer_ >initWindow, < _integer_ >maxPacket) - _boolean_ - Writes a session channel open packet. Returns false if you should wait for the continue event before sending any more traffic.
* openssh_agentForward(< _integer_ >channel[, < _boolean_ >wantReply]) - _boolean_ - Writes an auth-agent-req@openssh.com channel request packet. wantReply defaults to true. Returns false if you should wait for the continue event before sending any more traffic.
* windowChange(< _integer_ >channel, < _integer_ >rows, < _integer_ >cols, < _integer_ >height, < _integer_ >width) - _boolean_ - Writes a window change channel request packet. Returns false if you should wait for the continue event before sending any more traffic.
* pty(< _integer_ >channel, < _integer_ >rows, < _integer_ >cols, < _integer_ >height, < _integer_ >width, < _string_ >terminalType, < _mixed_ >terminalModes[, < _boolean_ >wantReply]) - _boolean_ - Writes a pty channel request packet. If terminalType is falsey, vt100 is used. terminalModes can be the raw bytes, an _object_ of the terminal modes to set, or a falsey value for no modes. wantReply defaults to true. Returns false if you should wait for the continue event before sending any more traffic.
* env(< _integer_ >channel, < _string_ >key, < _mixed_ >value[, < _boolean_ >wantReply]) - _boolean_ - Writes an env channel request packet. value can be a _string_ or _Buffer_. wantReply defaults to true. Returns false if you should wait for the continue event before sending any more traffic.
* shell(< _integer_ >channel[, < _boolean_ >wantReply]) - _boolean_ - Writes a shell channel request packet. wantReply defaults to true. Returns false if you should wait for the continue event before sending any more traffic.
* exec(< _integer_ >channel, < _string_ >command[, < _boolean_ >wantReply]) - _boolean_ - Writes an exec channel request packet. wantReply defaults to true. Returns false if you should wait for the continue event before sending any more traffic.
* signal(< _integer_ >channel, < _string_ >signalName) - _boolean_ - Writes a signal channel request packet. Returns false if you should wait for the continue event before sending any more traffic.
* x11Forward(< _integer_ >channel, < _object_ >config[, < _boolean_ >wantReply]) - _boolean_ - Writes an X11 forward channel request packet. wantReply defaults to true. Returns false if you should wait for the continue event before sending any more traffic. config can contain:
* single - _boolean_ - true if only a single connection should be forwarded.
* protocol - _string_ - The name of the X11 authentication method used (e.g. MIT-MAGIC-COOKIE-1).
* cookie - _string_ - The X11 authentication cookie encoded in hexadecimal.
* screen - _integer_ - The screen number to forward X11 connections for.
* subsystem(< _integer_ >channel, < _string_ >name[, < _boolean_ >wantReply]) - _boolean_ - Writes a subsystem channel request packet. name is the name of the subsystem (e.g. sftp or netconf). wantReply defaults to true. Returns false if you should wait for the continue event before sending any more traffic.
* openssh_noMoreSessions([< _boolean_ >wantReply]) - _boolean_ - Writes a no-more-sessions@openssh.com request packet. wantReply defaults to true. Returns false if you should wait for the continue event before sending any more traffic.
* openssh_streamLocalForward(< _string_ >socketPath[, < _boolean_ >wantReply]) - _boolean_ - Writes a streamlocal-forward@openssh.com request packet. wantReply defaults to true. Returns false if you should wait for the continue event before sending any more traffic.
* openssh_cancelStreamLocalForward(< _string_ >socketPath[, < _boolean_ >wantReply]) - _boolean_ - Writes a cancel-streamlocal-forward@openssh.com request packet. wantReply defaults to true. Returns false if you should wait for the continue event before sending any more traffic.
* openssh_directStreamLocal(< _integer_ >channel, < _integer_ >initWindow, < _integer_ >maxPacket, < _object_ >config) - _boolean_ - Writes a direct-streamlocal@openssh.com channel open packet. config must contain socketPath. Returns false if you should wait for the continue event before sending any more traffic.
Server-only methods
* serviceAccept(< _string_ >serviceName) - _boolean_ - Writes a service accept packet. Returns false if you should wait for the continue event before sending any more traffic.
* authFailure([< _array_ >authMethods[, < _boolean_ >partialSuccess]]) - _boolean_ - Writes a userauth failure packet. authMethods is an _array_ of authentication methods that can continue. Returns false if you should wait for the continue event before sending any more traffic.
* authSuccess() - _boolean_ - Writes a userauth success packet. Returns false if you should wait for the continue event before sending any more traffic.
* authPKOK(< _string_ >keyAlgorithm, < _Buffer_ >keyData) - _boolean_ - Writes a userauth PK OK packet. Returns false if you should wait for the continue event before sending any more traffic.
* authInfoReq(< _string_ >name, < _string_ >instructions, < _array_ >prompts) - _boolean_ - Writes a userauth info request packet. prompts is an array of { prompt: 'Prompt text', echo: true } objects (prompt being the prompt text and echo indicating whether the client's response to the prompt should be echoed to their display). Returns false if you should wait for the continue event before sending any more traffic.
* forwardedTcpip(< _integer_ >channel, < _integer_ >initWindow, < _integer_ >maxPacket, < _object_ >info) - _boolean_ - Writes a forwarded tcpip channel open packet. info must contain boundAddr, boundPort, remoteAddr, and remotePort. Returns false if you should wait for the continue event before sending any more traffic.
* x11(< _integer_ >channel, < _integer_ >initWindow, < _integer_ >maxPacket, < _object_ >info) - _boolean_ - Writes an X11 channel open packet. info must contain originAddr and originPort. Returns false if you should wait for the continue event before sending any more traffic.
* openssh_authAgent(< _integer_ >channel, < _integer_ >initWindow, < _integer_ >maxPacket) - _boolean_ - Writes an auth-agent@openssh.com channel open packet. Returns false if you should wait for the continue event before sending any more traffic.
* openssh_forwardedStreamLocal(< _integer_ >channel, < _integer_ >initWindow, < _integer_ >maxPacket, < _object_ >info) - _boolean_ - Writes an forwarded-streamlocal@openssh.com channel open packet. info must contain socketPath. Returns false if you should wait for the continue event before sending any more traffic.
* exitStatus(< _integer_ >channel, < _integer_ >exitCode) - _boolean_ - Writes an exit status channel request packet. Returns false if you should wait for the continue event before sending any more traffic.
* exitSignal(< _integer_ >channel, < _string_ >signalName, < _boolean_ >coreDumped, < _string_ >errorMessage) - _boolean_ - Writes an exit signal channel request packet. Returns false if you should wait for the continue event before sending any more traffic.
Utility methods
---------------
* parseKey(< _mixed_ >keyData[, < _string_ >passphrase]) - _mixed_ - Parses a private/public key in OpenSSH, RFC4716, or PPK format. For encrypted private keys, the key will be decrypted with the given passphrase. The returned value will be an array of objects (currently in the case of modern OpenSSH keys) or an object with these properties and methods:
* type - _string_ - The full key type (e.g. 'ssh-rsa')
* comment - _string_ - The comment for the key
* getPrivatePEM() - _string_ - This returns the PEM version of a private key
* getPublicPEM() - _string_ - This returns the PEM version of a public key (for either public key or derived from a private key)
* getPublicSSH() - _string_ - This returns the SSH version of a public key (for either public key or derived from a private key)
* sign(< _mixed_ >data) - _mixed_ - This signs the given data using this key and returns a _Buffer_ containing the signature on success. On failure, an _Error_ will be returned. data can be anything accepted by node's sign.update().
* verify(< _mixed_ >data, < _Buffer_ >signature) - _mixed_ - This verifies a signature of the given data using this key and returns true if the signature could be verified. On failure, either false will be returned or an _Error_ will be returned upon a more critical failure. data can be anything accepted by node's verify.update()`.