The UPM repository provides software drivers for a wide variety of commonly used sensors and actuators.
npm install upmUPM (Useful Packages & Modules) Sensor/Actuator repository for MRAA
==============
The UPM repository provides software drivers for a wide variety of commonly
used sensors and actuators. These software drivers interact with the
underlying hardware platform (or microcontroller), as well as with the attached
sensors, through calls to MRAA APIs.
Programmers can access the interfaces for each sensor by including the sensor’s
corresponding header file and instantiating the associated sensor class. In the
typical use case, a constructor initializes the sensor based on parameters that
identify the sensor, the I/O protocol used and the pin location of the sensor.
C++ interfaces have been defined for the following sensor/actuator types, but
they are subject to change:
* Light controller
* Light sensor
* Temperature sensor
* Humidity sensor
* Pressure sensor
* Gas sensor
* Analog to digital converter
The developer community is encouraged to help expand the list of supported
sensors and actuators and provide feedback on interface design.
A sensor/actuator is expected to work as such (here is the MMA7660 accelerometer API):
``C++
// Instantiate an MMA7660 on I2C bus 0
upm::MMA7660 *accel = new upm::MMA7660(MMA7660_DEFAULT_I2C_BUS,
MMA7660_DEFAULT_I2C_ADDR);
// place device in standby mode so we can write registers
accel->setModeStandby();
// enable 64 samples per second
accel->setSampleRate(MMA7660_AUTOSLEEP_64);
// place device into active mode
accel->setModeActive();
while (shouldRun)
{
float ax, ay, az;
accel->getAcceleration(&ax, &ay, &az);
cout << "Acceleration: x = " << ax
<< "g y = " << ay
<< "g z = " << az
<< "g" << endl;
usleep(500000);
}
`
Browse through the list of all examples.
Multi-sensor samples for the starter and specialized kits can be found in the
iot-devkit-samples repository.
Supported sensor list from API documentation.
You can also refer to the Intel® IoT Developer Zone.
If you would like to create projects and run the UPM samples using an Intel recommended IDE,
please refer to the Intel Developer Zone IDE page.
Find notes on how to install UPM on various OS'es on this page.
See building documentation here.

A quick way to add a new sensor driver is to port existing code from another
platform (e.g. Arduino) and swap the IO calls to the MRAA API. This of course
assumes either ownership of the original code or licensing that allows
unrestricted redistribution.
The porting section has more information on this process,
and there is an example available based on the max31855 sensor.
Read more on creating Java bindings for your
new driver.
Before you begin development, take a look at our naming conventions.
The name you pick for a newly added sensor needs to be unique in the UPM library.
Then, please go over this short set of rules for new contributions.
Make sure you add yourself as an author on every new code file submitted.
If you are providing a fix with significant changes, feel free to add yourself
as a contributor. Signing-off your commits is mandatory.
Documenting your code is also a big part of the task. We have a strict set of
tags used to classify our sensors and their capabilities. You can find out more
about this in our section on documenting a sensor API.
Finally, if you really want to ensure consistency with the rest of the library,
and the intel-iot-devkit repositories in general, take a look at our extensive
author guide.
API Documentation
==============
NOTE - Several important API changes are currently underway for some of our
widely used libraries including libupm-grove and libupm-i2clcd`!