This is an library that allows you to print to a receipt printer using WebSerial. This can either be a printer connected using a serial port, or a printer connected in any other way where the driver sets up a virtual serial port for compatiblitity reasons
npm install webserial-receipt-printerThis is an library that allows you to print to a receipt printer using WebSerial. This can either be a printer connected using a serial port, or a printer connected in any other way where the driver sets up a virtual serial port for compatiblitity reasons.
In order to print a receipt on a receipt printer you need to build the receipt and encode it as in the ESC/POS or StarPRNT language. You can use the ThermalPrinterEncoder library for this. You end up with an array of raw bytes that needs to be send to the printer. One way to do that is using this library and WebSerial.
Load the webserial-receipt-printer.umd.js file from the dist directory in the browser and instantiate a WebSerialReceiptPrinter object.
Or import the webserial-receipt-printer.esm.js module:
import WebSerialReceiptPrinter from 'webserial-receipt-printer.esm.js';
const receiptPrinter = new WebSerialReceiptPrinter();
When you create the WebSerialReceiptPrinter object you can specify a number of options to help with the library with connecting to the device.
Many devices that use serial ports can be configured to use different speeds and settings like databits, stopbits and parity and flow control. Sometimes these settings are hardcoded, sometimes they can be configured by DIP switches or other means. See the manual of your device for more information about how your device is configured and match the settings of your device with the properties below:
- baudRate: Number that indicates the speed, defaults to 9600.
- bufferSize: Size of the read and write buffers, defaults to 255.
- dataBits: Number of data bits per frame, either 7 or 8, defaults to 8.
- flowControl: The flow control type, either none, or hardware, defaults to none.
- parity: The parity mode, either none, even or odd. The default value is none.
- stopBits: The number of stop bits at the end of the frame. Can be either 1 or 2 and defaults to 1.
For example, to set a baud rate of 9600:
const receiptPrinter = new WebSerialReceiptPrinter({
baudRate: 9600
});
The first time you have to manually connect to the receipt printer by calling the connect() function. This function must be called as the result of an user action, for example clicking a button. You cannot call this function on page load.
function handleConnectButtonClick() {
receiptPrinter.connect();
}
Subsequent times you can simply call the reconnect() function. You have to provide an object with vendor id and product id of the previously connected receipt printer in order to find the correct printer and connect to it again. If there is more than one device with the same vendor id and product id it won't be able to determine which of the two devices was previously used. So it will not reconnect. You can get the vendor id and product id by listening to the connected event and store it for later use. Unfortunately this is only available for USB connected devices. It is recommended to call this button on page load to prevent having to manually connect to a previously connected device.
receiptPrinter.reconnect(lastUsedDevice);
If there are no receipt printers connected that have been previously connected, or the serial number does not match up, this function will do nothing.
To find out when a receipt printer is connected you can listen for the connected event using the addEventListener() function.
receiptPrinter.addEventListener('connected', device => {
console.log(Connected to a device with vendorId: ${device.vendorId} and productId: ${device.productId});
/ Store device for reconnecting /
lastUsedDevice = device;
});
The callback of the connected event is passed an object with the following properties:
- type
Type of the connection that is used, in this case it is always serial.
- vendorId
The USB vendor ID or null when it is not available.
- productId
The USB product ID or null when it is not available.
Once connected you can use the following command to print receipts.
When you want to print a receipt, you can call the print() function with an array, or a typed array with bytes. The data must be properly encoded for the printer.
For example:
/ Encode the receipt /
let encoder = new ThermalPrinterEncoder({
language: 'esc-pos',
codepageMapping: 'epson'
});
let data = encoder
.initialize()
.text('The quick brown fox jumps over the lazy dog')
.newline()
.qrcode('https://nielsleenheer.com')
.encode();
/ Print the receipt /
receiptPrinter.print(data);
MIT