Decorator-driven, aspect-oriented programming (AOP) for Node.js
npm install @northscaler/aspectify@northscaler/aspectify> NOTE: This currently uses Babel 7's @babel/plugin-proposal-decorators in legacy: true mode, which is compliant with TC39's Stage 1 decorator proposal.
> As the decorator proposal matures, this library will have to be updated to support later proposals (stage 2 & later).
> NOTE 2: Until further notice, do _not_ use retainLines: true in your Babel configuration, as it breaks Babel transpilation!
As the project takes shape, we'll be adding more to this readme.
In the meantime, see the tests for usage information.
.babelrc using Babel 7):``json`
{
"presets": [
[
"@babel/preset-env",
{
"targets": {
"node": true
}
}
]
],
"plugins": [
[
"@babel/plugin-proposal-decorators",
{
"legacy": true
}
]
]
}
* Define your class:
`js
// in file MyClass.js
class MyClass {
add(a, b) {
if (typeof a !== 'number' || typeof b !== 'number') {
throw new Error('only numbers allowed')
}
return a + b
}
}
module.exports = MyClass
`
* Define some advice:
`js
// in file logError.js
const { AfterThrowing } = require('@northscaler/aspectify')
const logError = ({ thisJoinPoint, error }) => {
console.log(ERROR: ${thisJoinPoint.fullName} threw ${error})
}
module.exports = AfterThrowing(logError)
`
* Update your class to use your advice:
`js
// in file MyClass.js
const logError = require('./LogError')
class MyClass {
@logError
add(a, b) {
if (typeof a !== 'number' || typeof b !== 'number') {
throw new Error('only numbers allowed')
}
return a + b
}
}
`
* Use your class:
`js
// in file go.js
const MyClass = require('./MyClass')
const adder = new MyClass()
try {
adder.add('a', 'b')
} catch (e) {
// gulp
}
`
`sh`
$ node go.js
ERROR: add threw Error: only numbers allowed
> NOTE:
If an advised method is synchronous (not async), then the advice _must_ also be synchronous.async
If an advised method is , the advice may be synchronous _or_ async.
> NOTE:
This library is not opinionated on whether decorator functions should begin with an upper case letter.
For each advice type, there are two exports, one with a lower case first letter & one with upper case.
Use whichever one you prefer.
".Since this library is based _exclusively_ on decorators, the only kind of pointcuts supported are those where a particular decorator is present.
In other words, you _only_ specify joinpoints explicitly via decorators; in other words, the placement of a decorator on a method is effectively identifying a joinpoint.
While limiting, it also has the advantage of providing developers visual indications of incoming advice, without having to have an AOP-aware editor.
$3
A joinpoint is a particular place in your code, as identified by a pointcut.
Continuing the example above, if you have several classes with methods beginning with the string foo, each one would be a distinct joinpoint selected by your pointcut expression.Remember, in this implementation of AOP, the only joinpoints you can pick out are method executions (including property accessors, since those are also methods).
$3
Advice is simply the code that runs at your joinpoints.
It's common for people to use the term "advice" in its plural form, "advices", so get used to that.#### Advice Types
There are several different advice types.
> TIP: You should use the _least_ powerful advice necessary for your use case.
*
Around: lets you completely control the advised joinpoint; this is the _most_ powerful form of advice.
* Before: invoked before a joinpoint executes; the only way to prevent execution of the advised method is to throw.
* AfterReturning: invoked after a joinpoint executes normally.
* AfterThrowing: invoked after a joinpoint throws.
* AfterFinally: invoked after a joinpoint executes normally or throws.All advice types in this library take functions that accept a
thisJoinPoint.
A thisJoinPoint is an extension of a thisJoinPointStaticPart.
Their definitions follow.#####
thisJoinPointStaticPart
A represents the information available at static analysis time, before your code executes.
It is an object with the following properties:*
clazz: the class (prototype) of the joinpoint, as given by the JavaScript decorator infrastructure.
* name: the name given by the JavaScript decorator implementation; for properties, it is just the property's name _without_ the get or set prefix.
* descriptors.original: the original property descriptor as given by the JavaScript decorator infrastructure.
* descriptors.advised: the new property descriptor returned by the advice type that you're using (Before, AfterReturning, etc).
* accessor: true if the joinpoint represents a JavaScript accessor (get or set method).#####
thisJoinPoint
A includes everything in a thisJoinPointStaticPart, plus:*
thiz: the context of the joinpoint; it is either the class instance of the joinpoint, or a class if your joinpoint targets a static method.
* static: if true, the context of the joinpoint is a static method, else it's false
* : same as thisJoinPoint.name, except when the joinpoint is an accessor, in which case it's get ${thisJoinPoint.name} or set ${thisJoinPoint.name}.
* args: the arguments given to the advised method, as an array.
* proceed: a function that is __only present if using Around or AsyncAround advice__, and provides you the ability to allow execution to proceed into the advised method.
It takes a single object argument with optional keys:
* thiz: a value for the this reference in the advised method; defaults to thisJoinPoint.thiz.
* args: an array of arguments that the target advised will be called with; defaults to thisJoinPoint.args.
* get: equal to thisJoinPoint.fullName if the invocation is of the get method of the accessor.
* set: equal to thisJoinPoint.fullName if the invocation is of the set method of the accessor.The
thisJoinPoint.get & thisJoinPoint.set allow you to easily detect whether the get or set accessor method has been invoked; just check the properties' truthiness.#### Before advice
Before advice executes before the target method does.Advice function signature:
function ({ thisJoinPoint }) {} advice allows you to do things _before_ the target method executes.
The only way to prevent execution of the target method is to throw.Typical uses of
Before advice include authorization, validation, deprecation warnings, etc.#### AfterReturning advice
AfterReturning advice executes only after the target method returns normally, that is, without throwing anything.Advice function signature:
function ({ thisJoinPoint, returnValue }) {} advice allows you to do things _after_ the target method returns normally.
You cannot replace the return value, only modify it.> NOTE: If you _must_ replace the return value entirely, use
Around advice.Typical uses of
AfterReturning advice include compliance, data masking, etc.#### AfterThrowing advice
AfterThrowing advice executes only after the target method throws anything, not returning normally.Advice function signature:
function ({ thisJoinPoint, error }) {} advice allows you to do things _after_ the target method has thrown something.
You cannot replace the throwable.> NOTE: If you _must_ replace the throwable entirely, use
Around advice.Typical uses of
AfterThrowing advice include compliance, error logging, etc.#### AfterFinally advice
AfterFinally advice executes after the target method completes, whether via returning normally or throwing.Advice function signature:
function ({ thisJoinPoint, returnValue, error }) {}Only one of
or error will be present, depending on whether the target method returned normally or threw, respectively.AfterFinally advice allows you to do things _after_ the target method completes.
You cannot replace the return value or throwable, only modify them.> NOTE: If you _must_ replace the return value or throwable entirely, use
Around advice.Typical uses of
AfterFinally advice include timings, auditing, etc.#### Around advice
Around advice is the most powerful form of advice, allowing you to completely replace the behavior of the decorated method.Advice function signature:
function ({ thisJoinPoint }) {}In the case of
advice, thisJoinPoint will also have a proceed function, that allows you to invoke the target method, optionally overriding the method's this reference and its arguments.
See the documentation above for thisJoinPoint for more information.> NOTE: The most common error when using
Around advice is to forget to return the target method's return value after thisJoinPoint.proceed()ing.
Remember to return a value if the target method does!Typical uses of
Around advice include caching, memoization, transaction management, method timings for service level agreement enforcement, etc.Defining Your Own Aspects
Recall that an aspect is fundamentally a pointcut and advice.
In this implementation of AOP, there is no pointcut expression language like in AspectJ.
The joinpoints are simply the methods on which you place your decorators.Advice is the code that executes at your joinpoint.
Therefore, advice is just a function, as detailed above, that is given to your decorator.
The general idea is that you select the _least_ powerful kind of advice that you need (basically, only use
Around advice if you absolutely need to).
Then, provide one of @northscaler/aspectify's advice types your advice function.> NOTE: For testability, it's a good idea to separate advice from decorators wherein they're used.
That way, you can test your advice separately from the decorators in which it's used.
There are basically two kinds of aspects: parameterless & parameterized.
$3
Here's an example of a parameterless Before aspect that enforces security:
`js
// in aspect file Secured.jsconst securityRepo = require('...') // require security repo from wherever you get it
const getUser = require('...') // some function that retrieves the current user from some context
const Secured = Before(
({ thisJoinPoint }) => {
const user = getUser()
if (thisJoinPoint.set && !securityRepo.grants(user, thisJoinPoint.thiz, thisJoinPoint.clazz, thisJoinPoint.method)) {
throw new Error(
unauthorized: ${user}, ${thisJoinPoint.clazz}.${thisJoinPoint.method})
}
}
)
`To use this aspect, simply decorate the methods that you intend to secure with the
decorator:
`js
// in class file Appointment.jsconst Secured = require('./Secured')
class Appointment {
constructor(begin, end, notes) {
this.begin = begin
this.end = end
this.notes = notes
}
@Secured
set cancelled (value) {
this._cancelled = value
}
get cancelled () {
return this._cancelled
}
}
`> NOTE: When intercepting accessors (that is,
& set methods of properties), only annotate _one_ of the accessor methods.Now, by simply using the class normally, unauthorized users will not be able to cancel appointments:
`js
const putUser = require('...') // some function that puts the user into some retrievable context
const appointmentRepo = require('...') // some Appointment repositoryputUser('liljohnny')
const appt = await appointmentRepo.findById(123)
appt.cancelled = true // throws Error if the user is not authorized to cancel this appointment
`> TIP: Use continuation-local storage to put things like users into a context.
> As a shameless plug, a good library to try is
; specifically, require('@northscaler/continuation-local-storage/context/ClsHookedContext').$3
Here's an example of a parameterized Before aspect that enforces security:
`js
// in aspect file Secured.jsconst securityRepo = require('...') // require security repo from wherever you get it
const getUser = require('...') // some function that retrieves the current user from some context
const Secured = message => Before(
({ thisJoinPoint }) => {
const user = getUser()
if (thisJoinPoint.set && !securityRepo.grants(user, thisJoinPoint.thiz, thisJoinPoint.clazz, thisJoinPoint.method)) {
throw new Error(
${message}: ${user}, ${thisJoinPoint.clazz}.${thisJoinPoint.method})
}
}
)
`To use this aspect, simply decorate the methods that you intend to secure with the
decorator:
`js
// in class file Appointment.jsconst Secured = require('./Secured')
class Appointment {
constructor(begin, end, notes) {
this.begin = begin
this.end = end
this.notes = notes
}
@Secured('boom')
set cancelled (value) {
this._cancelled = value
}
get cancelled () {
return this._cancelled
}
}
`> NOTE: When intercepting accessors (that is,
& set methods of properties), only annotate _one_ of the accessor methods.Now, by simply using the class normally, unauthorized users will not be able to cancel appointments:
`js
const putUser = require('...') // some function that puts the user into some retrievable context
const appointmentRepo = require('...') // some Appointment repositoryputUser('liljohnny')
const appt = await appointmentRepo.findById(123)
appt.cancelled = true // throws Error if the user is not authorized to cancel this appointment
`> TIP: Use continuation-local storage to put things like users into a context.
> As a shameless plug, a good library to try is
; specifically, require('@northscaler/continuation-local-storage/context/ClsHookedContext').$3
If an advised method is synchronous (not async), then the advice _must_ also be synchronous.If an advised method is
async, the advice may be synchronous _or_ async.Tips, Tricks & Best Practices
$3
Sorry, you currently can't intercept constructor execution, but there _is_ an alternative pattern.
Simply define a static factory method on your class, and intercept _that_:
`js
const secured = require('./secured')class Appointment {
/**
* Constructs a new Appointment instance.
*/
@secured
static new (begin, end, notes) {
return new Appointment(begin, end, notes)
}
/**
* @private
*/
constructor(begin, end, notes) {
// ...
}
}
`$3
The current decorator specification behaves in such a way that you can only decorate either the or set method, not both.
This implementation provides as much information as possible at design time and runtime for you to be able to detect which accessor was decorated and called, respectively.At design time,
thisJoinPointStaticPart.accessor is truthy if the decorated method is an accessor.At runtime, if
thisJoinPoint.set is truthy, then the set accessor was called and thisJoinPoint.fullName starts with set , and if thisJoinPoint.get is truthy, then the get accessor was called and thisJoinPoint.fullName starts with get .Modifying the target class
> NOTE: this is an advanced topic.This implementation also provides aspect authors the ability to modify the target class.
Each advice type accepts an optional second argument that is a function that is given a
thisJoinPointStaticPart, with which you can use to do any metaprogramming you need to.
In particular, the prototype of the target class is available at thisJoinPointStaticPart.clazz`.